Re: [PATCH 2/4] dt-bindings: clock: Convert ti,sci-clk to json schema

[Stephen Boyd <sboyd@xxxxxxxxxx>]

Quoting Nishanth Menon (2021-04-15 23:37:19)
> diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
> new file mode 100644
> index 000000000000..72633651f0c7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.yaml
> @@ -0,0 +1,52 @@
> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/ti,sci-clk.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI-SCI clock controller node bindings
> +
> +maintainers:
> +  - Nishanth Menon <nm@xxxxxx>
> +
> +allOf:
> +  - $ref: /schemas/clock/clock.yaml#

Is this needed?

> +
> +description: |
> +  Some TI SoCs contain a system controller (like the Power Management Micro
> +  Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
> +  the state of the various hardware modules present on the SoC. Communication
> +  between the host processor running an OS and the system controller happens
> +  through a protocol called TI System Control Interface (TI-SCI protocol).
> +
> +  This clock controller node uses the TI SCI protocol to perform various clock
> +  management of various hardware modules (devices) present on the SoC. This
> +  node must be a child node of the associated TI-SCI system controller node.
> +
> +properties:
> +  $nodename:
> +    pattern: "^clock-controller$"

Is this nodename pattern check required?

> +
> +  compatible:
> +    const: ti,k2g-sci-clk

I thought most things keyed off the compatible string.

> +
> +  "#clock-cells":
> +    const: 2
> +    description:
> +      The two cells represent values that the TI-SCI controller defines.
> +
> +      The first cell should contain the device ID.
> +
> +      The second cell should contain the clock ID.
> +
> +      Please see  http://processors.wiki.ti.com/index.php/TISCI for
> +      protocol documentation for the values to be used for different devices.
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    k3_clks: clock-controller {
> +        compatible = "ti,k2g-sci-clk";
> +        #clock-cells = <2>;
> +    };