Hi,
On Wed, Apr 7, 2021 at 2:35 PM Kornel Duleba <mindal@xxxxxxxxxxxx> wrote:
>
> Currently all PCIE windows point to bus address 0x0, which does not match
> the values obtained from hardware during EA.
> Replace those values with CPU addresses, since in reality we
> have a 1:1 mapping between the two.
>
> Signed-off-by: Kornel Duleba <mindal@xxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 262fbad8f0ec..85c62a6fabb6 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -994,19 +994,19 @@ pcie@1f0000000 { /* Integrated Endpoint Root Complex */
> msi-map = <0 &its 0x17 0xe>;
> iommu-map = <0 &smmu 0x17 0xe>;
> /* PF0-6 BAR0 - non-prefetchable memory */
> - ranges = <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000
> + ranges = <0x82000000 0x1 0xf8000000 0x1 0xf8000000 0x0 0x160000
> /* PF0-6 BAR2 - prefetchable memory */
> - 0xc2000000 0x0 0x00000000 0x1 0xf8160000 0x0 0x070000
> + 0xc2000000 0x1 0xf8160000 0x1 0xf8160000 0x0 0x070000
> /* PF0: VF0-1 BAR0 - non-prefetchable memory */
> - 0x82000000 0x0 0x00000000 0x1 0xf81d0000 0x0 0x020000
> + 0x82000000 0x1 0xf81d0000 0x1 0xf81d0000 0x0 0x020000
> /* PF0: VF0-1 BAR2 - prefetchable memory */
> - 0xc2000000 0x0 0x00000000 0x1 0xf81f0000 0x0 0x020000
> + 0xc2000000 0x1 0xf81f0000 0x1 0xf81f0000 0x0 0x020000
> /* PF1: VF0-1 BAR0 - non-prefetchable memory */
> - 0x82000000 0x0 0x00000000 0x1 0xf8210000 0x0 0x020000
> + 0x82000000 0x1 0xf8210000 0x1 0xf8210000 0x0 0x020000
> /* PF1: VF0-1 BAR2 - prefetchable memory */
> - 0xc2000000 0x0 0x00000000 0x1 0xf8230000 0x0 0x020000
> + 0xc2000000 0x1 0xf8230000 0x1 0xf8230000 0x0 0x020000
> /* BAR4 (PF5) - non-prefetchable memory */
> - 0x82000000 0x0 0x00000000 0x1 0xfc000000 0x0 0x400000>;
> + 0x82000000 0x1 0xfc000000 0x1 0xfc000000 0x0 0x400000>;
>
> enetc_port0: ethernet@0,0 {
> compatible = "fsl,enetc";
> --
> 2.31.1
>
Have you had a chance to to review the patch? Any questions or remarks?
Regards,
Kornel
