Hi Laurent,
On Thu, Apr 15, 2021 at 02:53:17AM +0300, Laurent Pinchart wrote:
> Hi Jacopo and Kieran,
>
> Thank you for the patch.
>
> On Wed, Apr 14, 2021 at 03:51:27PM +0200, Jacopo Mondi wrote:
> > From: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
> >
> > Describe the FAKRA connector available on Eagle board that allows
> > connecting GMSL camera modules such as IMI RDACM20 and RDACM21.
> >
> > Signed-off-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/renesas/eagle-gmsl.dtsi | 186 ++++++++++++++++++++
> > 1 file changed, 186 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/renesas/eagle-gmsl.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/renesas/eagle-gmsl.dtsi b/arch/arm64/boot/dts/renesas/eagle-gmsl.dtsi
> > new file mode 100644
> > index 000000000000..1836bca1e8b2
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/renesas/eagle-gmsl.dtsi
> > @@ -0,0 +1,186 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Device Tree Source (overlay) for the Eagle V3M GMSL connectors
> > + *
> > + * Copyright (C) 2017 Ideas on Board <kieran.bingham@xxxxxxxxxxxxxxxx>
> > + * Copyright (C) 2021 Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > + *
> > + * This overlay allows you to define GMSL cameras connected to the FAKRA
> > + * connectors on the Eagle-V3M (or compatible) board.
> > + *
> > + * The following cameras are currently supported:
> > + * "imi,rdacm20"
> > + * "imi,rdacm21"
> > + */
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +
> > +/*
> > + * Select which cameras are in use:
> > + * #define EAGLE_CAMERA0_RDACM20
> > + * #define EAGLE_CAMERA0_RDACM21
> > + *
> > + * The two camera modules are configured with different image formats
> > + * and cannot be mixed.
> > + */
> > +#define EAGLE_CAMERA0_RDACM21
> > +#define EAGLE_CAMERA1_RDACM21
> > +#define EAGLE_CAMERA2_RDACM21
> > +#define EAGLE_CAMERA3_RDACM21
>
> To avoid possible errors, I'd use one macro to set the camera model, and
> another macro to select the ports. The second could be a bitmask if
> desired.
>
> These macros should be defined in the file that includes this file, not
> here.
Don't worry, I have quite some comments from you on the dts patches
from the previous versio of the series still to address... As said in
the cover letter I was mostly interested in a validation of the new
property and the driver support.
Thanks
j
>
> > +
> > +/* Set the compatible string based on the camera model. */
> > +#if defined(EAGLE_CAMERA0_RDACM21) || defined(EAGLE_CAMERA1_RDACM21) || \
> > + defined(EAGLE_CAMERA2_RDACM21) || defined(EAGLE_CAMERA3_RDACM21)
> > +#define EAGLE_CAMERA_MODEL "imi,rdacm21"
> > +#define EAGLE_USE_RDACM21
> > +#elif defined(EAGLE_CAMERA0_RDACM20) || defined(EAGLE_CAMERA1_RDACM20) || \
> > + defined(EAGLE_CAMERA2_RDACM20) || defined(EAGLE_CAMERA3_RDACM20)
> > +#define EAGLE_CAMERA_MODEL "imi,rdacm20"
> > +#define EAGLE_USE_RDACM20
> > +#endif
> > +
> > +/* Define which cameras are available. */
> > +#if defined(EAGLE_CAMERA0_RDACM21) || defined(EAGLE_CAMERA0_RDACM20)
> > +#define EAGLE_USE_CAMERA_0
> > +#endif
> > +
> > +#if defined(EAGLE_CAMERA1_RDACM21) || defined(EAGLE_CAMERA1_RDACM20)
> > +#define EAGLE_USE_CAMERA_1
> > +#endif
> > +
> > +#if defined(EAGLE_CAMERA2_RDACM21) || defined(EAGLE_CAMERA2_RDACM20)
> > +#define EAGLE_USE_CAMERA_2
> > +#endif
> > +
> > +#if defined(EAGLE_CAMERA3_RDACM21) || defined(EAGLE_CAMERA3_RDACM20)
> > +#define EAGLE_USE_CAMERA_3
> > +#endif
> > +
> > +/* Define the endpoint links. */
> > +#ifdef EAGLE_USE_CAMERA_0
> > +&max9286_in0 {
> > + remote-endpoint = <&fakra_con0>;
> > +};
> > +#endif
> > +
> > +#ifdef EAGLE_USE_CAMERA_1
> > +&max9286_in1 {
> > + remote-endpoint = <&fakra_con1>;
> > +};
> > +#endif
> > +
> > +#ifdef EAGLE_USE_CAMERA_2
> > +&max9286_in2 {
> > + remote-endpoint = <&fakra_con2>;
> > +};
> > +#endif
> > +
> > +#ifdef EAGLE_USE_CAMERA_3
> > +&max9286_in3 {
> > + remote-endpoint = <&fakra_con3>;
> > +};
> > +#endif
> > +
> > +/* Populate the GMSL i2c-mux bus with camera nodes. */
> > +#if defined(EAGLE_USE_RDACM21) || defined(EAGLE_USE_RDACM20)
> > +
> > +#ifdef EAGLE_USE_CAMERA_0
> > +&vin0 {
> > + status = "okay";
> > +};
> > +#endif
> > +
> > +#ifdef EAGLE_USE_CAMERA_1
> > +&vin1 {
> > + status = "okay";
> > +};
> > +#endif
> > +
> > +#ifdef EAGLE_USE_CAMERA_2
> > +&vin2 {
> > + status = "okay";
> > +};
> > +#endif
> > +
> > +#ifdef EAGLE_USE_CAMERA_3
> > +&vin3 {
> > + status = "okay";
> > +};
> > +#endif
> > +
> > +&gmsl {
> > +
> > + status = "okay";
> > + maxim,reverse-channel-microvolt = <100000>;
> > +
> > + i2c-mux {
> > +#ifdef EAGLE_USE_CAMERA_0
> > + i2c@0 {
> > + status = "okay";
> > +
> > + camera@51 {
> > + compatible = EAGLE_CAMERA_MODEL;
> > + reg = <0x51>, <0x61>;
> > +
> > + port {
> > + fakra_con0: endpoint {
> > + remote-endpoint = <&max9286_in0>;
> > + };
> > + };
> > + };
> > + };
> > +#endif
> > +
> > +#ifdef EAGLE_USE_CAMERA_1
> > + i2c@1 {
> > + status = "okay";
> > +
> > + camera@52 {
> > + compatible = EAGLE_CAMERA_MODEL;
> > + reg = <0x52>, <0x62>;
> > +
> > + port {
> > + fakra_con1: endpoint {
> > + remote-endpoint = <&max9286_in1>;
> > + };
> > + };
> > + };
> > + };
> > +#endif
> > +
> > +#ifdef EAGLE_USE_CAMERA_2
> > + i2c@2 {
> > + status = "okay";
> > +
> > + camera@53 {
> > + compatible = EAGLE_CAMERA_MODEL;
> > + reg = <0x53>, <0x63>;
> > +
> > + port {
> > + fakra_con2: endpoint {
> > + remote-endpoint = <&max9286_in2>;
> > + };
> > + };
> > + };
> > + };
> > +#endif
> > +
> > +#ifdef EAGLE_USE_CAMERA_3
> > + i2c@3 {
> > + status = "okay";
> > +
> > + camera@54 {
> > + compatible = EAGLE_CAMERA_MODEL;
> > + reg = <0x54>, <0x64>;
> > +
> > + port {
> > + fakra_con3: endpoint {
> > + remote-endpoint = <&max9286_in3>;
> > + };
> > + };
> > + };
> > + };
> > +#endif
> > + };
> > +};
> > +#endif
>
> --
> Regards,
>
> Laurent Pinchart
