[PATCH] ARM: dts: imx6dl-yapp4: Configure the OLED display segment offset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The imx6dl-yapp4 platform uses a GE-LX012864FWPP3N0000 OLED display.
The display consist of a 128x64 OLED panel and a SSD1305 controller.

The OLED panel resolution is 128x64 but the built-in controller default
resolution is 132x64. To display properly a segment offset needs to be
configured.

Signed-off-by: Michal Vokáč <michal.vokac@xxxxxxxxx>
---
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 51972c85e207..111d4d331f98 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -373,6 +373,7 @@
 		solomon,height = <64>;
 		solomon,width = <128>;
 		solomon,page-offset = <0>;
+		solomon,col-offset = <4>;
 		solomon,prechargep2 = <15>;
 		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
 		vbat-supply = <&sw2_reg>;
-- 
2.1.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux