STM32 USBPHYC provides two USB High-Speed ports which are used by controllers
with Host capabilities. That's why vbus-supply has to be supported on each
phy node.
---
Changes in v2:
- use connector node vbus-supply property as suggested by Rob
---
Amelie Delaunay (2):
dt-bindings: phy: add vbus-supply optional property to
phy-stm32-usbphyc
phy: stm32: manage optional vbus regulator on phy_power_on/off
.../bindings/phy/phy-stm32-usbphyc.yaml | 11 +++++++
drivers/phy/st/phy-stm32-usbphyc.c | 31 +++++++++++++++++++
2 files changed, 42 insertions(+)
--
2.17.1
