On 12.04.2021 12:49:56, Rob Herring wrote: > On Mon, Apr 12, 2021 at 12:19:30PM +0200, Marc Kleine-Budde wrote: > > On 4/9/21 3:40 PM, Aswath Govindraju wrote: > > > Add binding documentation for TI TCAN104x CAN transceivers. > > > > > > Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx> > > > --- > > > .../bindings/phy/ti,tcan104x-can.yaml | 56 +++++++++++++++++++ > > > 1 file changed, 56 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml > > > new file mode 100644 > > > index 000000000000..4abfc30a97d0 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml > > > @@ -0,0 +1,56 @@ > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > +$id: "http://devicetree.org/schemas/phy/ti,tcan104x-can.yaml#"; > > > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; > > > + > > > +title: TCAN104x CAN TRANSCEIVER PHY > > > + > > > +maintainers: > > > + - Aswath Govindraju <a-govindraju@xxxxxx> > > > + > > > +properties: > > > + $nodename: > > > + pattern: "^tcan104x-phy" > > > + > > > + compatible: > > > + enum: > > > + - ti,tcan1042 > > > + - ti,tcan1043 > > > > Can you create a generic standby only and a generic standby and enable transceiver? > > As a fallback compatible fine, but no generic binding please. A generic > binding can't describe any timing requirements between the 2 GPIO as > well as supplies when someone wants to add those (and they will). Right - that makes sense. > > > + > > > + '#phy-cells': > > > + const: 0 > > > + > > > + standby-gpios: > > > + description: > > > + gpio node to toggle standby signal on transceiver > > > + maxItems: 1 > > > + > > > + enable-gpios: > > > + description: > > > + gpio node to toggle enable signal on transceiver > > > + maxItems: 1 > > > + > > > + max-bitrate: > > > + $ref: /schemas/types.yaml#/definitions/uint32 > > > + description: > > > + max bit rate supported in bps > > We already have 'max-speed' for serial devices, use that. There is already the neither Ethernet PHY (PHYLINK/PHYLIB) nor generic PHY (GENERIC_PHY) can-transceiver binding Documentation/devicetree/bindings/net/can/can-transceiver.yaml which specifies max-bitrate. I don't have strong feelings whether to use max-bitrate or max-speed. Speaking about Ethernet PHYs, what are to pros and cons to use the generic PHY compared to the Ethernet PHY infrastructure? regards, Marc -- Pengutronix e.K. | Marc Kleine-Budde | Embedded Linux | https://www.pengutronix.de | Vertretung West/Dortmund | Phone: +49-231-2826-924 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Attachment:
signature.asc
Description: PGP signature
