Re: [PATCH v2 30/30] media: atmel: atmel-isc: add microchip-xisc driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Eugene,

On Mon, Apr 12, 2021 at 12:37:41PM +0000, Eugen.Hristev@xxxxxxxxxxxxx wrote:
> > +static int xisc_parse_dt(struct device *dev, struct isc_device *isc)
> > +{
> > +	struct device_node *np = dev->of_node;
> > +	struct device_node *epn = NULL;
> > +	struct isc_subdev_entity *subdev_entity;
> > +	unsigned int flags;
> > +	int ret;
> > +	bool mipi_mode;
> > +
> > +	INIT_LIST_HEAD(&isc->subdev_entities);
> > +
> > +	mipi_mode = of_property_read_bool(np, "microchip,mipi-mode");
> > +
> > +	while (1) {
> > +		struct v4l2_fwnode_endpoint v4l2_epn = { .bus_type = 0 };
> > +
> > +		epn = of_graph_get_next_endpoint(np, epn);
> > +		if (!epn)
> > +			return 0;
> > +
> > +		ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(epn),
> > +						 &v4l2_epn);
> > +		if (ret) {
> > +			ret = -EINVAL;
> > +			dev_err(dev, "Could not parse the endpoint\n");
> > +			break;
> > +		}
> > +
> > +		subdev_entity = devm_kzalloc(dev, sizeof(*subdev_entity),
> > +					     GFP_KERNEL);
> > +		if (!subdev_entity) {
> > +			ret = -ENOMEM;
> > +			break;
> > +		}
> > +		subdev_entity->epn = epn;
> > +
> > +		flags = v4l2_epn.bus.parallel.flags;
> > +
> > +		if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
> > +			subdev_entity->pfe_cfg0 = ISC_PFE_CFG0_HPOL_LOW;
> > +
> > +		if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
> > +			subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_VPOL_LOW;
> > +
> > +		if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
> > +			subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_PPOL_LOW;
> > +
> > +		if (v4l2_epn.bus_type == V4L2_MBUS_BT656)
> > +			subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_CCIR_CRC |
> > +					ISC_PFE_CFG0_CCIR656;
>
> Hi Jacopo,
>
> If I use the bus-type property for the 'port' , do I actually have to
> change something here ?

You can set bus_type to the desired type, if it doesn't match the
'bus-type' property you will have an immediate error and a more strict
check on the properties.

You would likely:

        v4l2_epn.bus_type = V4L2_MBUS_PARALLEL;
        ret = v4l2_fwnode_endpoint_parse()
        if (!ret) {
                /* It's parallel */
        } else {
                v4l2_epn.bus_type = V4L2_MBUS_BT656;
                ret = v4l2_fwnode_endpoint_parse()
                if (ret) {
                        /* Unsupported bus type: error out. */
                }

                /* It's BT656 */
        }

Not the greatest API, but it's more robust.

> the v4l2_epn.bus_type won't be set automatically ? by the endpoint
> parser I mean.

Yes, that's what auto-discovery is, the endpoint parser tries to
deduce the bus type from the properties that are there specified. It
works, but leaves quite some ambiguity between ie PARALLEL and BT656
as some polarities might not be necessarily specified even for
PARALLEL bus types.

As I've said, there's still plenty of code that relies on
auto-discovery so I don't think this is blocking, also because making
bus-type mandatory on existing DTS is quite painful. Since this is a
new DTS you can consider this solution if you want to.

Thanks
   j

>
> Thanks,
> Eugen
>
> > +
> > +		if (mipi_mode)
> > +			subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_MIPI;
> > +
> > +		list_add_tail(&subdev_entity->list, &isc->subdev_entities);
> > +	}
> > +	of_node_put(epn);
> > +
> > +	return ret;
> > +}
> > +
> > +static int microchip_xisc_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct isc_device *isc;
> > +	struct resource *res;
> > +	void __iomem *io_base;
> > +	struct isc_subdev_entity *subdev_entity;
> > +	int irq;
> > +	int ret;
> > +	u32 ver;
> > +
> > +	isc = devm_kzalloc(dev, sizeof(*isc), GFP_KERNEL);
> > +	if (!isc)
> > +		return -ENOMEM;
> > +
> > +	platform_set_drvdata(pdev, isc);
> > +	isc->dev = dev;
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	io_base = devm_ioremap_resource(dev, res);
> > +	if (IS_ERR(io_base))
> > +		return PTR_ERR(io_base);
> > +
> > +	isc->regmap = devm_regmap_init_mmio(dev, io_base, &isc_regmap_config);
> > +	if (IS_ERR(isc->regmap)) {
> > +		ret = PTR_ERR(isc->regmap);
> > +		dev_err(dev, "failed to init register map: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	irq = platform_get_irq(pdev, 0);
> > +	if (irq < 0)
> > +		return irq;
> > +
> > +	ret = devm_request_irq(dev, irq, isc_interrupt, 0,
> > +			       "microchip-sama7g5-xisc", isc);
> > +	if (ret < 0) {
> > +		dev_err(dev, "can't register ISR for IRQ %u (ret=%i)\n",
> > +			irq, ret);
> > +		return ret;
> > +	}
> > +
> > +	isc->gamma_table = isc_sama7g5_gamma_table;
> > +	isc->gamma_max = 0;
> > +
> > +	isc->max_width = ISC_SAMA7G5_MAX_SUPPORT_WIDTH;
> > +	isc->max_height = ISC_SAMA7G5_MAX_SUPPORT_HEIGHT;
> > +
> > +	isc->config_dpc = isc_sama7g5_config_dpc;
> > +	isc->config_csc = isc_sama7g5_config_csc;
> > +	isc->config_cbc = isc_sama7g5_config_cbc;
> > +	isc->config_cc = isc_sama7g5_config_cc;
> > +	isc->config_gam = isc_sama7g5_config_gam;
> > +	isc->config_rlp = isc_sama7g5_config_rlp;
> > +	isc->config_ctrls = isc_sama7g5_config_ctrls;
> > +
> > +	isc->adapt_pipeline = isc_sama7g5_adapt_pipeline;
> > +
> > +	isc->offsets.csc = ISC_SAMA7G5_CSC_OFFSET;
> > +	isc->offsets.cbc = ISC_SAMA7G5_CBC_OFFSET;
> > +	isc->offsets.sub422 = ISC_SAMA7G5_SUB422_OFFSET;
> > +	isc->offsets.sub420 = ISC_SAMA7G5_SUB420_OFFSET;
> > +	isc->offsets.rlp = ISC_SAMA7G5_RLP_OFFSET;
> > +	isc->offsets.his = ISC_SAMA7G5_HIS_OFFSET;
> > +	isc->offsets.dma = ISC_SAMA7G5_DMA_OFFSET;
> > +	isc->offsets.version = ISC_SAMA7G5_VERSION_OFFSET;
> > +	isc->offsets.his_entry = ISC_SAMA7G5_HIS_ENTRY_OFFSET;
> > +
> > +	isc->controller_formats = sama7g5_controller_formats;
> > +	isc->controller_formats_size = ARRAY_SIZE(sama7g5_controller_formats);
> > +	isc->formats_list = sama7g5_formats_list;
> > +	isc->formats_list_size = ARRAY_SIZE(sama7g5_formats_list);
> > +
> > +	/* sama7g5-isc RAM access port is full AXI4 - 32 bits per beat */
> > +	isc->dcfg = ISC_DCFG_YMBSIZE_BEATS32 | ISC_DCFG_CMBSIZE_BEATS32;
> > +
> > +	ret = isc_pipeline_init(isc);
> > +	if (ret)
> > +		return ret;
> > +
> > +	isc->hclock = devm_clk_get(dev, "hclock");
> > +	if (IS_ERR(isc->hclock)) {
> > +		ret = PTR_ERR(isc->hclock);
> > +		dev_err(dev, "failed to get hclock: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	ret = clk_prepare_enable(isc->hclock);
> > +	if (ret) {
> > +		dev_err(dev, "failed to enable hclock: %d\n", ret);
> > +		return ret;
> > +	}
> > +
> > +	ret = isc_clk_init(isc);
> > +	if (ret) {
> > +		dev_err(dev, "failed to init isc clock: %d\n", ret);
> > +		goto unprepare_hclk;
> > +	}
> > +
> > +	isc->ispck = isc->isc_clks[ISC_ISPCK].clk;
> > +
> > +	ret = clk_prepare_enable(isc->ispck);
> > +	if (ret) {
> > +		dev_err(dev, "failed to enable ispck: %d\n", ret);
> > +		goto unprepare_hclk;
> > +	}
> > +
> > +	/* ispck should be greater or equal to hclock */
> > +	ret = clk_set_rate(isc->ispck, clk_get_rate(isc->hclock));
> > +	if (ret) {
> > +		dev_err(dev, "failed to set ispck rate: %d\n", ret);
> > +		goto unprepare_clk;
> > +	}
> > +
> > +	ret = v4l2_device_register(dev, &isc->v4l2_dev);
> > +	if (ret) {
> > +		dev_err(dev, "unable to register v4l2 device.\n");
> > +		goto unprepare_clk;
> > +	}
> > +
> > +	ret = xisc_parse_dt(dev, isc);
> > +	if (ret) {
> > +		dev_err(dev, "fail to parse device tree\n");
> > +		goto unregister_v4l2_device;
> > +	}
> > +
> > +	if (list_empty(&isc->subdev_entities)) {
> > +		dev_err(dev, "no subdev found\n");
> > +		ret = -ENODEV;
> > +		goto unregister_v4l2_device;
> > +	}
> > +
> > +	list_for_each_entry(subdev_entity, &isc->subdev_entities, list) {
> > +		struct v4l2_async_subdev *asd;
> > +
> > +		v4l2_async_notifier_init(&subdev_entity->notifier);
> > +
> > +		asd = v4l2_async_notifier_add_fwnode_remote_subdev(
> > +					&subdev_entity->notifier,
> > +					of_fwnode_handle(subdev_entity->epn),
> > +					struct v4l2_async_subdev);
> > +
> > +		of_node_put(subdev_entity->epn);
> > +		subdev_entity->epn = NULL;
> > +
> > +		if (IS_ERR(asd)) {
> > +			ret = PTR_ERR(asd);
> > +			goto cleanup_subdev;
> > +		}
> > +
> > +		subdev_entity->notifier.ops = &isc_async_ops;
> > +
> > +		ret = v4l2_async_notifier_register(&isc->v4l2_dev,
> > +						   &subdev_entity->notifier);
> > +		if (ret) {
> > +			dev_err(dev, "fail to register async notifier\n");
> > +			goto cleanup_subdev;
> > +		}
> > +
> > +		if (video_is_registered(&isc->video_dev))
> > +			break;
> > +	}
> > +
> > +	pm_runtime_set_active(dev);
> > +	pm_runtime_enable(dev);
> > +	pm_request_idle(dev);
> > +
> > +	regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
> > +	dev_info(dev, "Microchip XISC version %x\n", ver);
> > +
> > +	return 0;
> > +
> > +cleanup_subdev:
> > +	isc_subdev_cleanup(isc);
> > +
> > +unregister_v4l2_device:
> > +	v4l2_device_unregister(&isc->v4l2_dev);
> > +
> > +unprepare_clk:
> > +	clk_disable_unprepare(isc->ispck);
> > +unprepare_hclk:
> > +	clk_disable_unprepare(isc->hclock);
> > +
> > +	isc_clk_cleanup(isc);
> > +
> > +	return ret;
> > +}
> > +
> > +static int microchip_xisc_remove(struct platform_device *pdev)
> > +{
> > +	struct isc_device *isc = platform_get_drvdata(pdev);
> > +
> > +	pm_runtime_disable(&pdev->dev);
> > +
> > +	isc_subdev_cleanup(isc);
> > +
> > +	v4l2_device_unregister(&isc->v4l2_dev);
> > +
> > +	clk_disable_unprepare(isc->ispck);
> > +	clk_disable_unprepare(isc->hclock);
> > +
> > +	isc_clk_cleanup(isc);
> > +
> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused xisc_runtime_suspend(struct device *dev)
> > +{
> > +	struct isc_device *isc = dev_get_drvdata(dev);
> > +
> > +	clk_disable_unprepare(isc->ispck);
> > +	clk_disable_unprepare(isc->hclock);
> > +
> > +	return 0;
> > +}
> > +
> > +static int __maybe_unused xisc_runtime_resume(struct device *dev)
> > +{
> > +	struct isc_device *isc = dev_get_drvdata(dev);
> > +	int ret;
> > +
> > +	ret = clk_prepare_enable(isc->hclock);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = clk_prepare_enable(isc->ispck);
> > +	if (ret)
> > +		clk_disable_unprepare(isc->hclock);
> > +
> > +	return ret;
> > +}
> > +
> > +static const struct dev_pm_ops microchip_xisc_dev_pm_ops = {
> > +	SET_RUNTIME_PM_OPS(xisc_runtime_suspend, xisc_runtime_resume, NULL)
> > +};
> > +
> > +static const struct of_device_id microchip_xisc_of_match[] = {
> > +	{ .compatible = "microchip,sama7g5-isc" },
> > +	{ }
> > +};
> > +MODULE_DEVICE_TABLE(of, microchip_xisc_of_match);
> > +
> > +static struct platform_driver microchip_xisc_driver = {
> > +	.probe	= microchip_xisc_probe,
> > +	.remove	= microchip_xisc_remove,
> > +	.driver	= {
> > +		.name		= "microchip-sama7g5-xisc",
> > +		.pm		= &microchip_xisc_dev_pm_ops,
> > +		.of_match_table = of_match_ptr(microchip_xisc_of_match),
> > +	},
> > +};
> > +
> > +module_platform_driver(microchip_xisc_driver);
> > +
> > +MODULE_AUTHOR("Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>");
> > +MODULE_DESCRIPTION("The V4L2 driver for Microchip-XISC");
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_SUPPORTED_DEVICE("video");
> >
>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux