[PATCH v3,2/6] dt-bindings: media: mtk-vcodec: Add dma-ranges property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The mt8192 iommu support 0~16GB iova. We separate it to four banks:
0~4G; 4G~8G; 8G~12G; 12G~16G.

The "dma-ranges" could be used to adjust the bank we locate.
If we don't set this property. The default range always is 0~4G.

Here we don't have actual bus/parent concept here.  And the iova
requirement is for our HW. Thus put the property in our node.

Signed-off-by: Irui Wang <irui.wang@xxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/media/mediatek-vcodec.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index 06db6837cefd..b7801e3c354a 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -22,6 +22,8 @@ Required properties:
 - iommus : should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml
   for details.
+- dma-ranges : describes how the physical address space of the IOMMU maps
+  to memory.
 One of the two following nodes:
 - mediatek,vpu : the node of the video processor unit, if using VPU.
 - mediatek,scp : the node of the SCP unit, if using SCP.
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux