A test with the command below gives this error:
/arch/arm/boot/dts/rv1108-evb.dt.yaml:
pwm@10280000: 'interrupts' does not match any of the regexes:
'pinctrl-[0-9]+'
"interrupts" is an undocumented property, so remove them
from pwm nodes in rv1108.dtsi.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml
Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
---
arch/arm/boot/dts/rv1108.dtsi | 8 --------
1 file changed, 8 deletions(-)
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index 68e2282f7..af033d4c9 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -217,7 +217,6 @@
pwm4: pwm@10280000 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280000 0x10>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@@ -229,7 +228,6 @@
pwm5: pwm@10280010 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280010 0x10>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@@ -241,7 +239,6 @@
pwm6: pwm@10280020 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280020 0x10>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@@ -253,7 +250,6 @@
pwm7: pwm@10280030 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x10280030 0x10>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@@ -391,7 +387,6 @@
pwm0: pwm@20040000 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040000 0x10>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@@ -403,7 +398,6 @@
pwm1: pwm@20040010 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040010 0x10>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@@ -415,7 +409,6 @@
pwm2: pwm@20040020 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040020 0x10>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
@@ -427,7 +420,6 @@
pwm3: pwm@20040030 {
compatible = "rockchip,rv1108-pwm", "rockchip,rk3288-pwm";
reg = <0x20040030 0x10>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_PWM0_PMU>, <&cru PCLK_PWM0_PMU>;
clock-names = "pwm", "pclk";
pinctrl-names = "default";
--
2.11.0
