Add IPA-related nodes and definitions to "sdx55.dtsi". The SMP2P nodes (ipa_smp2p_out and ipa_smp2p_in) are already present. Signed-off-by: Alex Elder <elder@xxxxxxxxxx> --- Note: This depends on this series posted by Mani Sadhasivam: https://lore.kernel.org/linux-arm-msm/20210408170457.91409-1-manivannan.sadhasivam@xxxxxxxxxx arch/arm/boot/dts/qcom-sdx55.dtsi | 41 +++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index e4180bbc46555..0dc515dc5750d 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -215,6 +215,47 @@ qpic_nand: nand@1b30000 { status = "disabled"; }; + ipa: ipa@1e40000 { + compatible = "qcom,sdx55-ipa"; + + iommus = <&apps_smmu 0x5e0 0x0>, + <&apps_smmu 0x5e2 0x0>; + reg = <0x1e40000 0x7000>, + <0x1e50000 0x4b20>, + <0x1e04000 0x2c000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&system_noc MASTER_IPA &system_noc SLAVE_SNOC_MEM_NOC_GC>, + <&mem_noc MASTER_SNOC_GC_MEM_NOC &mc_virt SLAVE_EBI_CH0>, + <&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>, + <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>; + interconnect-names = "memory-a", + "memory-b", + "imem", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x01f40000 0x40000>; -- 2.27.0
