Re: [PATCH RESEND v8 7/7] arm64: dts: qcom: Harmonize DWC USB3 DT nodes name

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri 09 Apr 06:30 CDT 2021, Serge Semin wrote:

> In accordance with the DWC USB3 bindings the corresponding node
> name is suppose to comply with the Generic USB HCD DT schema, which
> requires the USB nodes to have the name acceptable by the regexp:
> "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
> named.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
> Acked-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

As mentioned previously, I would like to merge this through the qcom soc
tree to avoid conflicts with other activities, but need the driver code
(patch 6) to land first.

Regards,
Bjorn

> ---
>  arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 4 ++--
>  arch/arm64/boot/dts/qcom/ipq8074.dtsi        | 4 ++--
>  arch/arm64/boot/dts/qcom/msm8996.dtsi        | 4 ++--
>  arch/arm64/boot/dts/qcom/msm8998.dtsi        | 2 +-
>  arch/arm64/boot/dts/qcom/qcs404-evb.dtsi     | 2 +-
>  arch/arm64/boot/dts/qcom/qcs404.dtsi         | 4 ++--
>  arch/arm64/boot/dts/qcom/sc7180.dtsi         | 2 +-
>  arch/arm64/boot/dts/qcom/sdm845.dtsi         | 4 ++--
>  arch/arm64/boot/dts/qcom/sm8150.dtsi         | 2 +-
>  9 files changed, 14 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
> index defcbd15edf9..34e97da98270 100644
> --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
> +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
> @@ -1064,7 +1064,7 @@ &usb2 {
>  	status = "okay";
>  	extcon = <&usb2_id>;
>  
> -	dwc3@7600000 {
> +	usb@7600000 {
>  		extcon = <&usb2_id>;
>  		dr_mode = "otg";
>  		maximum-speed = "high-speed";
> @@ -1075,7 +1075,7 @@ &usb3 {
>  	status = "okay";
>  	extcon = <&usb3_id>;
>  
> -	dwc3@6a00000 {
> +	usb@6a00000 {
>  		extcon = <&usb3_id>;
>  		dr_mode = "otg";
>  	};
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> index a32e5e79ab0b..7df4eb710aae 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
> @@ -427,7 +427,7 @@ usb_0: usb@8af8800 {
>  			resets = <&gcc GCC_USB0_BCR>;
>  			status = "disabled";
>  
> -			dwc_0: dwc3@8a00000 {
> +			dwc_0: usb@8a00000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x8a00000 0xcd00>;
>  				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> @@ -468,7 +468,7 @@ usb_1: usb@8cf8800 {
>  			resets = <&gcc GCC_USB1_BCR>;
>  			status = "disabled";
>  
> -			dwc_1: dwc3@8c00000 {
> +			dwc_1: usb@8c00000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x8c00000 0xcd00>;
>  				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index ce430ba9c118..9eb31b3e6ee7 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -1772,7 +1772,7 @@ usb3: usb@6af8800 {
>  			power-domains = <&gcc USB30_GDSC>;
>  			status = "disabled";
>  
> -			dwc3@6a00000 {
> +			usb@6a00000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x06a00000 0xcc00>;
>  				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
> @@ -1983,7 +1983,7 @@ usb2: usb@76f8800 {
>  			power-domains = <&gcc USB30_GDSC>;
>  			status = "disabled";
>  
> -			dwc3@7600000 {
> +			usb@7600000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x07600000 0xcc00>;
>  				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> index 1f2e93aa6553..9141c5d09b59 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> @@ -1962,7 +1962,7 @@ usb3: usb@a8f8800 {
>  
>  			resets = <&gcc GCC_USB_30_BCR>;
>  
> -			usb3_dwc3: dwc3@a800000 {
> +			usb3_dwc3: usb@a800000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x0a800000 0xcd00>;
>  				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
> index a80c578484ba..f8a55307b855 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
> @@ -337,7 +337,7 @@ &usb2_phy_sec {
>  &usb3 {
>  	status = "okay";
>  
> -	dwc3@7580000 {
> +	usb@7580000 {
>  		dr_mode = "host";
>  	};
>  };
> diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> index 339790ba585d..9c4be020d568 100644
> --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
> @@ -544,7 +544,7 @@ usb3: usb@7678800 {
>  			assigned-clock-rates = <19200000>, <200000000>;
>  			status = "disabled";
>  
> -			dwc3@7580000 {
> +			usb@7580000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x07580000 0xcd00>;
>  				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> @@ -573,7 +573,7 @@ usb2: usb@79b8800 {
>  			assigned-clock-rates = <19200000>, <133333333>;
>  			status = "disabled";
>  
> -			dwc3@78c0000 {
> +			usb@78c0000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x078c0000 0xcc00>;
>  				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 1ea3344ab62c..8b83ffbb5b2a 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -2869,7 +2869,7 @@ usb_1: usb@a6f8800 {
>  					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3 0>;
>  			interconnect-names = "usb-ddr", "apps-usb";
>  
> -			usb_1_dwc3: dwc3@a600000 {
> +			usb_1_dwc3: usb@a600000 {
>  				compatible = "snps,dwc3";
>  				reg = <0 0x0a600000 0 0xe000>;
>  				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 454f794af547..809be2c67d7a 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -3769,7 +3769,7 @@ usb_1: usb@a6f8800 {
>  					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
>  			interconnect-names = "usb-ddr", "apps-usb";
>  
> -			usb_1_dwc3: dwc3@a600000 {
> +			usb_1_dwc3: usb@a600000 {
>  				compatible = "snps,dwc3";
>  				reg = <0 0x0a600000 0 0xcd00>;
>  				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> @@ -3817,7 +3817,7 @@ usb_2: usb@a8f8800 {
>  					<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
>  			interconnect-names = "usb-ddr", "apps-usb";
>  
> -			usb_2_dwc3: dwc3@a800000 {
> +			usb_2_dwc3: usb@a800000 {
>  				compatible = "snps,dwc3";
>  				reg = <0 0x0a800000 0 0xcd00>;
>  				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index e5bb17bc2f46..e4c3edc13676 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -1719,7 +1719,7 @@ usb_1: usb@a6f8800 {
>  
>  			resets = <&gcc GCC_USB30_PRIM_BCR>;
>  
> -			usb_1_dwc3: dwc3@a600000 {
> +			usb_1_dwc3: usb@a600000 {
>  				compatible = "snps,dwc3";
>  				reg = <0 0x0a600000 0 0xcd00>;
>  				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> -- 
> 2.30.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux