Add support for MCK1..4 save restore for ULP modes. Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> --- arch/arm/mach-at91/pm_suspend.S | 126 ++++++++++++++++++++++++++++++++ 1 file changed, 126 insertions(+) diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index 84418120ba67..8b0b8619ee8a 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -765,7 +765,122 @@ sr_dis_exit: 2: .endm +/** + * at91_mckx_ps_enable: save MCK1..4 settings and switch it to main clock + * + * Side effects: overwrites tmp1, tmp2 + */ +.macro at91_mckx_ps_enable +#ifdef CONFIG_SOC_SAMA7 + ldr pmc, .pmc_base + + /* There are 4 MCKs we need to handle: MCK1..4 */ + mov tmp1, #1 +e_loop: cmp tmp1, #5 + beq e_done + + /* Write MCK ID to retrieve the settings. */ + str tmp1, [pmc, #AT91_PMC_MCR_V2] + ldr tmp2, [pmc, #AT91_PMC_MCR_V2] + +e_save_mck1: + cmp tmp1, #1 + bne e_save_mck2 + str tmp2, .saved_mck1 + b e_ps + +e_save_mck2: + cmp tmp1, #2 + bne e_save_mck3 + str tmp2, .saved_mck2 + b e_ps + +e_save_mck3: + cmp tmp1, #3 + bne e_save_mck4 + str tmp2, .saved_mck3 + b e_ps + +e_save_mck4: + str tmp2, .saved_mck4 + +e_ps: + /* Use CSS=MAINCK and DIV=1. */ + bic tmp2, tmp2, #AT91_PMC_MCR_V2_CSS + bic tmp2, tmp2, #AT91_PMC_MCR_V2_DIV + orr tmp2, tmp2, #AT91_PMC_MCR_V2_CSS_MAINCK + orr tmp2, tmp2, #AT91_PMC_MCR_V2_DIV1 + str tmp2, [pmc, #AT91_PMC_MCR_V2] + + wait_mckrdy tmp1 + + add tmp1, tmp1, #1 + b e_loop + +e_done: +#endif +.endm + +/** + * at91_mckx_ps_restore: restore MCK1..4 settings + * + * Side effects: overwrites tmp1, tmp2 + */ +.macro at91_mckx_ps_restore +#ifdef CONFIG_SOC_SAMA7 + ldr pmc, .pmc_base + + /* There are 4 MCKs we need to handle: MCK1..4 */ + mov tmp1, #1 +r_loop: cmp tmp1, #5 + beq r_done + +r_save_mck1: + cmp tmp1, #1 + bne r_save_mck2 + ldr tmp2, .saved_mck1 + b r_ps + +r_save_mck2: + cmp tmp1, #2 + bne r_save_mck3 + ldr tmp2, .saved_mck2 + b r_ps + +r_save_mck3: + cmp tmp1, #3 + bne r_save_mck4 + ldr tmp2, .saved_mck3 + b r_ps + +r_save_mck4: + ldr tmp2, .saved_mck4 + +r_ps: + /* Write MCK ID to retrieve the settings. */ + str tmp1, [pmc, #AT91_PMC_MCR_V2] + ldr tmp3, [pmc, #AT91_PMC_MCR_V2] + + /* We need to restore CSS and DIV. */ + bic tmp3, tmp3, #AT91_PMC_MCR_V2_CSS + bic tmp3, tmp3, #AT91_PMC_MCR_V2_DIV + orr tmp3, tmp3, tmp2 + bic tmp3, tmp3, #AT91_PMC_MCR_V2_ID_MSK + orr tmp3, tmp3, tmp1 + orr tmp3, tmp3, #AT91_PMC_MCR_V2_CMD + str tmp2, [pmc, #AT91_PMC_MCR_V2] + + wait_mckrdy tmp1 + + add tmp1, tmp1, #1 + b r_loop +r_done: +#endif +.endm + .macro at91_ulp_mode + at91_mckx_ps_enable + ldr pmc, .pmc_base ldr tmp2, .mckr_offset ldr tmp3, .pm_mode @@ -817,6 +932,7 @@ ulp_exit: mov tmp3, #0 wait_mckrdy tmp3 + at91_mckx_ps_restore .endm .macro at91_backup_mode @@ -946,6 +1062,16 @@ ENDPROC(at91_pm_suspend_in_sram) .word 0 .saved_osc_status: .word 0 +#ifdef CONFIG_SOC_SAMA7 +.saved_mck1: + .word 0 +.saved_mck2: + .word 0 +.saved_mck3: + .word 0 +.saved_mck4: + .word 0 +#endif ENTRY(at91_pm_suspend_in_sram_sz) .word .-at91_pm_suspend_in_sram -- 2.25.1
