Re: [v7,1/3] arm64: dts: mt8183: add thermal zone node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 16/03/2021 08:01, Michael Kao wrote:
> From: "michael.kao" <michael.kao@xxxxxxxxxxxx>
> 
> Add thermal zone node to Mediatek MT8183 dts file.
> 
> Evaluate the thermal zone every 500ms while not cooling
> and every 100ms when passive cooling is performed.
> 
> Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> Signed-off-by: Michael Kao <michael.kao@xxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi | 85 ++++++++++++++++++++++++
>  1 file changed, 85 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 5b782a4769e7..d3550af06408 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -657,6 +657,87 @@
>  			status = "disabled";
>  		};
>  
> +		thermal: thermal@1100b000 {
> +			#thermal-sensor-cells = <1>;
> +			compatible = "mediatek,mt8183-thermal";
> +			reg = <0 0x1100b000 0 0x1000>;
> +			clocks = <&infracfg CLK_INFRA_THERM>,
> +				 <&infracfg CLK_INFRA_AUXADC>;
> +			clock-names = "therm", "auxadc";
> +			resets = <&infracfg  MT8183_INFRACFG_AO_THERM_SW_RST>;
> +			interrupts = <0 76 IRQ_TYPE_LEVEL_LOW>;
> +			mediatek,auxadc = <&auxadc>;
> +			mediatek,apmixedsys = <&apmixedsys>;
> +			nvmem-cells = <&thermal_calibration>;
> +			nvmem-cell-names = "calibration-data";
> +		};
> +
> +		thermal-zones {
> +			cpu_thermal: cpu_thermal {
> +				polling-delay-passive = <100>;
> +				polling-delay = <500>;
> +				thermal-sensors = <&thermal 0>;
> +				sustainable-power = <5000>;
> +			};
> +
> +			/* The tzts1 ~ tzts6 don't need to polling */
> +			/* The tzts1 ~ tzts6 don't need to thermal throttle */
> +
> +			tzts1: tzts1 {
> +				polling-delay-passive = <0>;
> +				polling-delay = <0>;
> +				thermal-sensors = <&thermal 1>;
> +				sustainable-power = <5000>;
> +				trips {};
> +				cooling-maps {};
> +			};

What is the point of defining the sustainable power with no cooling
device associated ?



-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux