Quoting DENG Qingfang <dqfext@xxxxxxxxx>:
Add support for MT7530 interrupt controller.
DENG Qingfang (4):
net: phy: add MediaTek PHY driver
net: dsa: mt7530: add interrupt support
dt-bindings: net: dsa: add MT7530 interrupt controller binding
staging: mt7621-dts: enable MT7530 interrupt controller
.../devicetree/bindings/net/dsa/mt7530.txt | 5 +
drivers/net/dsa/Kconfig | 1 +
drivers/net/dsa/mt7530.c | 266 ++++++++++++++++--
drivers/net/dsa/mt7530.h | 20 +-
drivers/net/phy/Kconfig | 5 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mediatek.c | 112 ++++++++
drivers/staging/mt7621-dts/mt7621.dtsi | 3 +
8 files changed, 384 insertions(+), 29 deletions(-)
create mode 100644 drivers/net/phy/mediatek.c
--
2.25.1
I already tested v2 which works fine.
v3 works too.
Tested on Ubiquiti ER-X-SFP (MT7621) with 1 external phy which uses irq=POLL.
See dmesg log:
[ 12.045645] mt7530 mdio-bus:1f eth0 (uninitialized): PHY
[mt7530-0:00] driver [MediaTek MT7530 PHY] (irq=24)
[ 12.425643] mt7530 mdio-bus:1f eth1 (uninitialized): PHY
[mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=25)
[ 12.745642] mt7530 mdio-bus:1f eth2 (uninitialized): PHY
[mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=26)
[ 13.065656] mt7530 mdio-bus:1f eth3 (uninitialized): PHY
[mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=27)
[ 13.445657] mt7530 mdio-bus:1f eth4 (uninitialized): PHY
[mt7530-0:04] driver [MediaTek MT7530 PHY] (irq=28)
[ 13.785656] mt7530 mdio-bus:1f eth5 (uninitialized): PHY
[mdio-bus:07] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
Tested-by: René van Dorst <opensource@xxxxxxxxxx>
Greats,
René
