[PATCH net-next v2 1/2] mfd: Add Renesas Synchronization Management Unit (SMU) support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Min Li <min.li.xe@xxxxxxxxxxx>

Add support for ClockMatrix(TM) and 82P33xxx families of timing
and synchronization devices. The access interface can be either
SPI or I2C. Currently, it will create 2 types of MFD devices,
which are to be used by the corresponding rsmu character device
driver and the PTP hardware clock driver, respectively.

Signed-off-by: Min Li <min.li.xe@xxxxxxxxxxx>
---
Change log
-rebase change to linux-next tree
-add log to inform driver loading success

 drivers/mfd/Kconfig              |  28 ++
 drivers/mfd/Makefile             |   3 +
 drivers/mfd/rsmu_i2c.c           | 349 +++++++++++++++++
 drivers/mfd/rsmu_private.h       |  32 ++
 drivers/mfd/rsmu_spi.c           | 376 ++++++++++++++++++
 include/linux/mfd/idt82p33_reg.h | 116 ++++++
 include/linux/mfd/idt8a340_reg.h | 817 +++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/rsmu.h         |  54 +++
 8 files changed, 1775 insertions(+)
 create mode 100644 drivers/mfd/rsmu_i2c.c
 create mode 100644 drivers/mfd/rsmu_private.h
 create mode 100644 drivers/mfd/rsmu_spi.c
 create mode 100644 include/linux/mfd/idt82p33_reg.h
 create mode 100644 include/linux/mfd/idt8a340_reg.h
 create mode 100644 include/linux/mfd/rsmu.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 21a131d..63b18b3 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2172,5 +2172,33 @@ config MFD_INTEL_M10_BMC
 	  additional drivers must be enabled in order to use the functionality
 	  of the device.
 
+config MFD_RSMU_I2C
+	tristate "Renesas Synchronization Management Unit with I2C"
+	depends on I2C && OF
+	depends on MFD_RSMU_SPI=n
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Support for the Renesas synchronization management unit, such as
+	  Clockmatrix and 82P33XXX series. This option supports I2C as
+	  the control interface.
+
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
+config MFD_RSMU_SPI
+	tristate "Renesas Synchronization Management Unit with SPI"
+	depends on SPI && OF
+	select MFD_CORE
+	help
+	  Support for the Renesas synchronization management unit, such as
+	  Clockmatrix and 82P33XXX series. This option supports SPI as
+	  the control interface.
+
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the functionality
+	  of the device.
+
 endmenu
 endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 4f6d2b8..4ab32ef 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -271,3 +271,6 @@ obj-$(CONFIG_MFD_INTEL_M10_BMC)   += intel-m10-bmc.o
 
 obj-$(CONFIG_MFD_ATC260X)	+= atc260x-core.o
 obj-$(CONFIG_MFD_ATC260X_I2C)	+= atc260x-i2c.o
+
+obj-$(CONFIG_MFD_RSMU_I2C)	+= rsmu_i2c.o
+obj-$(CONFIG_MFD_RSMU_SPI)	+= rsmu_spi.o
diff --git a/drivers/mfd/rsmu_i2c.c b/drivers/mfd/rsmu_i2c.c
new file mode 100644
index 0000000..2349f6d
--- /dev/null
+++ b/drivers/mfd/rsmu_i2c.c
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Multi-function driver for the IDT ClockMatrix(TM) and 82P33xxx families of
+ * timing and synchronization devices.
+ *
+ * Copyright (C) 2019 Integrated Device Technology, Inc., a Renesas Company.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rsmu.h>
+#include "rsmu_private.h"
+
+/*
+ * 16-bit register address: the lower 8 bits of the register address come
+ * from the offset addr byte and the upper 8 bits come from the page register.
+ */
+#define	RSMU_CM_PAGE_ADDR		0xFD
+#define	RSMU_CM_PAGE_WINDOW		256
+
+/*
+ * 15-bit register address: the lower 7 bits of the register address come
+ * from the offset addr byte and the upper 8 bits come from the page register.
+ */
+#define	RSMU_SABRE_PAGE_ADDR		0x7F
+#define	RSMU_SABRE_PAGE_WINDOW		128
+
+static bool rsmu_cm_volatile_reg(struct device *dev, unsigned int reg);
+static bool rsmu_sabre_volatile_reg(struct device *dev, unsigned int reg);
+
+/* Current mfd device index */
+static atomic_t rsmu_ndevs = ATOMIC_INIT(0);
+
+/* Platform data */
+static struct rsmu_pdata rsmu_pdata[RSMU_MAX_MFD_DEV];
+
+/* clockmatrix phc devices */
+static struct mfd_cell rsmu_cm_pdev[RSMU_MAX_MFD_DEV] = {
+	[0] = {
+		.name = "idtcm-ptp0",
+		.of_compatible	= "renesas,idtcm-ptp0",
+	},
+	[1] = {
+		.name = "idtcm-ptp1",
+		.of_compatible	= "renesas,idtcm-ptp1",
+	},
+	[2] = {
+		.name = "idtcm-ptp2",
+		.of_compatible	= "renesas,idtcm-ptp2",
+	},
+	[3] = {
+		.name = "idtcm-ptp3",
+		.of_compatible	= "renesas,idtcm-ptp3",
+	},
+};
+
+/* sabre phc devices */
+static struct mfd_cell rsmu_sabre_pdev[RSMU_MAX_MFD_DEV] = {
+	[0] = {
+		.name = "idt82p33-ptp0",
+		.of_compatible	= "renesas,idt82p33-ptp0",
+	},
+	[1] = {
+		.name = "idt82p33-ptp1",
+		.of_compatible	= "renesas,idt82p33-ptp1",
+	},
+	[2] = {
+		.name = "idt82p33-ptp2",
+		.of_compatible	= "renesas,idt82p33-ptp2",
+	},
+	[3] = {
+		.name = "idt82p33-ptp3",
+		.of_compatible	= "renesas,idt82p33-ptp3",
+	},
+};
+
+/* rsmu character devices */
+static struct mfd_cell rsmu_cdev[RSMU_MAX_MFD_DEV] = {
+	[0] = {
+		.name = "rsmu-cdev0",
+		.of_compatible	= "renesas,rsmu-cdev0",
+	},
+	[1] = {
+		.name = "rsmu-cdev1",
+		.of_compatible	= "renesas,rsmu-cdev1",
+	},
+	[2] = {
+		.name = "rsmu-cdev2",
+		.of_compatible	= "renesas,rsmu-cdev2",
+	},
+	[3] = {
+		.name = "rsmu-cdev3",
+		.of_compatible	= "renesas,rsmu-cdev3",
+	},
+};
+
+static const struct regmap_range_cfg rsmu_cm_range_cfg[] = {
+	{
+		.range_min = 0,
+		.range_max = 0xD000,
+		.selector_reg = RSMU_CM_PAGE_ADDR,
+		.selector_mask = 0xFF,
+		.selector_shift = 0,
+		.window_start = 0,
+		.window_len = RSMU_CM_PAGE_WINDOW,
+	}
+};
+
+static const struct regmap_range_cfg rsmu_sabre_range_cfg[] = {
+	{
+		.range_min = 0,
+		.range_max = 0x400,
+		.selector_reg = RSMU_SABRE_PAGE_ADDR,
+		.selector_mask = 0xFF,
+		.selector_shift = 0,
+		.window_start = 0,
+		.window_len = RSMU_SABRE_PAGE_WINDOW,
+	}
+};
+
+static const struct regmap_config rsmu_regmap_configs[] = {
+	[RSMU_CM] = {
+		.reg_bits = 8,
+		.val_bits = 8,
+		.max_register = 0xD000,
+		.ranges = rsmu_cm_range_cfg,
+		.num_ranges = ARRAY_SIZE(rsmu_cm_range_cfg),
+		.volatile_reg = rsmu_cm_volatile_reg,
+		.cache_type = REGCACHE_RBTREE,
+		.can_multi_write = true,
+	},
+	[RSMU_SABRE] = {
+		.reg_bits = 8,
+		.val_bits = 8,
+		.max_register = 0x400,
+		.ranges = rsmu_sabre_range_cfg,
+		.num_ranges = ARRAY_SIZE(rsmu_sabre_range_cfg),
+		.volatile_reg = rsmu_sabre_volatile_reg,
+		.cache_type = REGCACHE_RBTREE,
+		.can_multi_write = true,
+	},
+};
+
+static bool rsmu_cm_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case RSMU_CM_PAGE_ADDR:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static bool rsmu_sabre_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case RSMU_SABRE_PAGE_ADDR:
+		return false;
+	default:
+		return true;
+	}
+}
+
+int rsmu_read(struct device *dev, u16 reg, u8 *buf, u16 size)
+{
+	struct rsmu_dev *rsmu = dev_get_drvdata(dev);
+
+	return regmap_bulk_read(rsmu->regmap, reg, buf, size);
+}
+EXPORT_SYMBOL_GPL(rsmu_read);
+
+int rsmu_write(struct device *dev, u16 reg, u8 *buf, u16 size)
+{
+	struct rsmu_dev *rsmu = dev_get_drvdata(dev);
+
+	return regmap_bulk_write(rsmu->regmap, reg, buf, size);
+}
+EXPORT_SYMBOL_GPL(rsmu_write);
+
+static int rsmu_mfd_init(struct rsmu_dev *rsmu, struct mfd_cell *mfd,
+			 struct rsmu_pdata *pdata)
+{
+	int ret;
+
+	mfd->platform_data = pdata;
+	mfd->pdata_size = sizeof(struct rsmu_pdata);
+
+	ret = mfd_add_devices(rsmu->dev, -1, mfd, 1, NULL, 0, NULL);
+	if (ret < 0) {
+		dev_err(rsmu->dev, "mfd_add_devices failed with %s\n",
+			mfd->name);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int rsmu_dev_init(struct rsmu_dev *rsmu)
+{
+	struct rsmu_pdata *pdata;
+	struct mfd_cell *pmfd;
+	struct mfd_cell *cmfd;
+	int ret;
+
+	/* Initialize regmap */
+	rsmu->regmap = devm_regmap_init_i2c(rsmu->client,
+					    &rsmu_regmap_configs[rsmu->type]);
+	if (IS_ERR(rsmu->regmap)) {
+		ret = PTR_ERR(rsmu->regmap);
+		dev_err(rsmu->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	/* Initialize device index */
+	rsmu->index = atomic_read(&rsmu_ndevs);
+	if (rsmu->index >= RSMU_MAX_MFD_DEV)
+		return -ENODEV;
+
+	/* Initialize platform data */
+	pdata = &rsmu_pdata[rsmu->index];
+	pdata->lock = &rsmu->lock;
+	pdata->type = rsmu->type;
+	pdata->index = rsmu->index;
+
+	/* Initialize MFD devices */
+	cmfd = &rsmu_cdev[rsmu->index];
+	if (rsmu->type == RSMU_CM)
+		pmfd = &rsmu_cm_pdev[rsmu->index];
+	else if (rsmu->type == RSMU_SABRE)
+		pmfd = &rsmu_sabre_pdev[rsmu->index];
+	else
+		return -EINVAL;
+
+	ret = rsmu_mfd_init(rsmu, pmfd, pdata);
+	if (ret)
+		return ret;
+
+	ret = rsmu_mfd_init(rsmu, cmfd, pdata);
+	if (ret)
+		return ret;
+
+	atomic_inc(&rsmu_ndevs);
+	return 0;
+}
+
+static int rsmu_dt_init(struct rsmu_dev *rsmu)
+{
+	struct device_node *np = rsmu->dev->of_node;
+
+	rsmu->type = RSMU_NONE;
+	if (of_device_is_compatible(np, "idt,8a34000")) {
+		rsmu->type = RSMU_CM;
+	} else if (of_device_is_compatible(np, "idt,82p33810")) {
+		rsmu->type = RSMU_SABRE;
+	} else {
+		dev_err(rsmu->dev, "unknown RSMU device\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rsmu_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct rsmu_dev *rsmu;
+	int ret;
+
+	rsmu = devm_kzalloc(&client->dev, sizeof(struct rsmu_dev),
+			       GFP_KERNEL);
+	if (rsmu == NULL)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, rsmu);
+	mutex_init(&rsmu->lock);
+	rsmu->dev = &client->dev;
+	rsmu->client = client;
+
+	ret = rsmu_dt_init(rsmu);
+	if (ret)
+		return ret;
+
+	mutex_lock(&rsmu->lock);
+	ret = rsmu_dev_init(rsmu);
+	mutex_unlock(&rsmu->lock);
+
+	if (ret == 0)
+		dev_info(rsmu->dev, "Probe %s successful\n",
+			 rsmu_name(rsmu->type));
+
+	return ret;
+}
+
+static int rsmu_remove(struct i2c_client *client)
+{
+	struct rsmu_dev *rsmu = i2c_get_clientdata(client);
+
+	mfd_remove_devices(&client->dev);
+	mutex_destroy(&rsmu->lock);
+	atomic_dec(&rsmu_ndevs);
+
+	return 0;
+}
+
+static const struct i2c_device_id rsmu_id[] = {
+	{ "8a34000", 0 },
+	{ "82p33810", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rsmu_id);
+
+static const struct of_device_id rsmu_of_match[] = {
+	{.compatible = "idt,8a34000", },
+	{.compatible = "idt,82p33810", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rsmu_of_match);
+
+static struct i2c_driver rsmu_driver = {
+	.driver = {
+		   .name = "rsmu-i2c",
+		   .of_match_table = of_match_ptr(rsmu_of_match),
+	},
+	.probe = rsmu_probe,
+	.remove	= rsmu_remove,
+	.id_table = rsmu_id,
+};
+
+static int __init rsmu_init(void)
+{
+	return i2c_add_driver(&rsmu_driver);
+}
+/* init early so consumer devices can complete system boot */
+subsys_initcall(rsmu_init);
+
+static void __exit rsmu_exit(void)
+{
+	i2c_del_driver(&rsmu_driver);
+}
+module_exit(rsmu_exit);
+
+MODULE_DESCRIPTION("Renesas SMU I2C multi-function driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/rsmu_private.h b/drivers/mfd/rsmu_private.h
new file mode 100644
index 0000000..8841a24
--- /dev/null
+++ b/drivers/mfd/rsmu_private.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Multi-function driver for the IDT ClockMatrix(TM) and 82p33xxx families of
+ * timing and synchronization devices.
+ *
+ * Copyright (C) 2019 Integrated Device Technology, Inc., a Renesas Company.
+ */
+
+#ifndef __RSMU_MFD_PRIVATE_H
+#define __RSMU_MFD_PRIVATE_H
+
+#include <linux/mfd/rsmu.h>
+
+/* Maximum number of mfd devices */
+#define RSMU_MAX_MFD_DEV		4
+
+struct rsmu_dev {
+	struct device *dev;
+	void *client;
+	struct regmap *regmap;
+	struct mutex lock;
+	enum rsmu_type type;
+	u8 index;
+	u16 page;
+};
+
+enum rsmu_mfd_type {
+	RSMU_MFD_PTP		= 0,
+	RSMU_MFD_CDEV		= 1,
+	RSMU_MFD_NUM		= 2,
+};
+#endif /*  __LINUX_MFD_RSMU_H */
diff --git a/drivers/mfd/rsmu_spi.c b/drivers/mfd/rsmu_spi.c
new file mode 100644
index 0000000..a9fbe04
--- /dev/null
+++ b/drivers/mfd/rsmu_spi.c
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Multi-function driver for the IDT ClockMatrix(TM) and 82P33xxx families of
+ * timing and synchronization devices.
+ *
+ * Copyright (C) 2019 Integrated Device Technology, Inc., a Renesas Company.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rsmu.h>
+#include "rsmu_private.h"
+
+/*
+ * 16-bit register address: the lower 7 bits of the register address come
+ * from the offset addr byte and the upper 9 bits come from the page register.
+ */
+#define	RSMU_CM_PAGE_ADDR		0x7C
+#define	RSMU_SABRE_PAGE_ADDR		0x7F
+#define	RSMU_HIGHER_ADDR_MASK		0xFF80
+#define	RSMU_HIGHER_ADDR_SHIFT		7
+#define	RSMU_LOWER_ADDR_MASK		0x7F
+
+/* Current mfd device index */
+static atomic_t rsmu_ndevs = ATOMIC_INIT(0);
+
+/* Platform data */
+static struct rsmu_pdata rsmu_pdata[RSMU_MAX_MFD_DEV];
+
+/* clockmatrix phc devices */
+static struct mfd_cell rsmu_cm_pdev[RSMU_MAX_MFD_DEV] = {
+	[0] = {
+		.name = "idtcm-ptp0",
+		.of_compatible	= "renesas,idtcm-ptp0",
+	},
+	[1] = {
+		.name = "idtcm-ptp1",
+		.of_compatible	= "renesas,idtcm-ptp1",
+	},
+	[2] = {
+		.name = "idtcm-ptp2",
+		.of_compatible	= "renesas,idtcm-ptp2",
+	},
+	[3] = {
+		.name = "idtcm-ptp3",
+		.of_compatible	= "renesas,idtcm-ptp3",
+	},
+};
+
+/* sabre phc devices */
+static struct mfd_cell rsmu_sabre_pdev[RSMU_MAX_MFD_DEV] = {
+	[0] = {
+		.name = "idt82p33-ptp0",
+		.of_compatible	= "renesas,idt82p33-ptp0",
+	},
+	[1] = {
+		.name = "idt82p33-ptp1",
+		.of_compatible	= "renesas,idt82p33-ptp1",
+	},
+	[2] = {
+		.name = "idt82p33-ptp2",
+		.of_compatible	= "renesas,idt82p33-ptp2",
+	},
+	[3] = {
+		.name = "idt82p33-ptp3",
+		.of_compatible	= "renesas,idt82p33-ptp3",
+	},
+};
+
+/* rsmu character devices */
+static struct mfd_cell rsmu_cdev[RSMU_MAX_MFD_DEV] = {
+	[0] = {
+		.name = "rsmu-cdev0",
+		.of_compatible	= "renesas,rsmu-cdev0",
+	},
+	[1] = {
+		.name = "rsmu-cdev1",
+		.of_compatible	= "renesas,rsmu-cdev1",
+	},
+	[2] = {
+		.name = "rsmu-cdev2",
+		.of_compatible	= "renesas,rsmu-cdev2",
+	},
+	[3] = {
+		.name = "rsmu-cdev3",
+		.of_compatible	= "renesas,rsmu-cdev3",
+	},
+};
+
+static int rsmu_read_device(struct rsmu_dev *rsmu, u8 reg, u8 *buf, u16 bytes)
+{
+	struct spi_device *client = rsmu->client;
+	struct spi_transfer xfer = {0};
+	struct spi_message msg;
+	u8 cmd[256] = {0};
+	u8 rsp[256] = {0};
+	int ret;
+
+	cmd[0] = reg | 0x80;
+	xfer.rx_buf = rsp;
+	xfer.len = bytes + 1;
+	xfer.tx_buf = cmd;
+	xfer.bits_per_word = client->bits_per_word;
+	xfer.speed_hz = client->max_speed_hz;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	ret = spi_sync(client, &msg);
+	if (ret >= 0)
+		memcpy(buf, &rsp[1], xfer.len-1);
+
+	return ret;
+}
+
+static int rsmu_write_device(struct rsmu_dev *rsmu, u8 reg, u8 *buf, u16 bytes)
+{
+	struct spi_device *client = rsmu->client;
+	struct spi_transfer xfer = {0};
+	struct spi_message msg;
+	u8 cmd[256] = {0};
+	int ret = -1;
+
+	cmd[0] = reg;
+	memcpy(&cmd[1], buf, bytes);
+
+	xfer.len = bytes + 1;
+	xfer.tx_buf = cmd;
+	xfer.bits_per_word = client->bits_per_word;
+	xfer.speed_hz = client->max_speed_hz;
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	ret = spi_sync(client, &msg);
+	return ret;
+}
+
+static int rsmu_write_page_register(struct rsmu_dev *rsmu, u16 reg)
+{
+	u8 buf[2];
+	u16 bytes;
+	u16 page;
+	u8 preg;
+	int err;
+
+	switch (rsmu->type) {
+	case RSMU_CM:
+		preg = RSMU_CM_PAGE_ADDR;
+		page = reg & RSMU_HIGHER_ADDR_MASK;
+		buf[0] = (u8)(page & 0xff);
+		buf[1] = (u8)((page >> 8) & 0xff);
+		bytes = 2;
+		break;
+	case RSMU_SABRE:
+		preg = RSMU_SABRE_PAGE_ADDR;
+		page = reg >> RSMU_HIGHER_ADDR_SHIFT;
+		buf[0] = (u8)(page & 0xff);
+		bytes = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (rsmu->page == page)
+		return 0;
+
+	err = rsmu_write_device(rsmu, preg, buf, bytes);
+
+	if (err) {
+		rsmu->page = 0xffff;
+		dev_err(rsmu->dev,
+			"failed to set page offset 0x%x\n", page);
+	} else {
+		rsmu->page = page;
+	}
+
+	return err;
+}
+
+int rsmu_read(struct device *dev, u16 reg, u8 *buf, u16 size)
+{
+	struct rsmu_dev *rsmu = dev_get_drvdata(dev);
+	u8 addr = (u8)(reg & RSMU_LOWER_ADDR_MASK);
+	int err;
+
+	err = rsmu_write_page_register(rsmu, reg);
+	if (err)
+		return err;
+
+	err = rsmu_read_device(rsmu, addr, buf, size);
+	if (err)
+		dev_err(rsmu->dev,
+			"failed to read offset address 0x%x\n", addr);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(rsmu_read);
+
+int rsmu_write(struct device *dev, u16 reg, u8 *buf, u16 size)
+{
+	struct rsmu_dev *rsmu = dev_get_drvdata(dev);
+	u8 addr = (u8)(reg & RSMU_LOWER_ADDR_MASK);
+	int err;
+
+	err = rsmu_write_page_register(rsmu, reg);
+	if (err)
+		return err;
+
+	err = rsmu_write_device(rsmu, addr, buf, size);
+	if (err)
+		dev_err(rsmu->dev,
+			"failed to write offset address 0x%x\n", addr);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(rsmu_write);
+
+static int rsmu_mfd_init(struct rsmu_dev *rsmu, struct mfd_cell *mfd,
+			 struct rsmu_pdata *pdata)
+{
+	int ret;
+
+	mfd->platform_data = pdata;
+	mfd->pdata_size = sizeof(struct rsmu_pdata);
+
+	ret = mfd_add_devices(rsmu->dev, -1, mfd, 1, NULL, 0, NULL);
+	if (ret < 0) {
+		dev_err(rsmu->dev, "mfd_add_devices failed with %s\n",
+			mfd->name);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int rsmu_dev_init(struct rsmu_dev *rsmu)
+{
+	struct rsmu_pdata *pdata;
+	struct mfd_cell *pmfd;
+	struct mfd_cell *cmfd;
+	int ret;
+
+	/* Initialize device index */
+	rsmu->index = atomic_read(&rsmu_ndevs);
+	if (rsmu->index >= RSMU_MAX_MFD_DEV)
+		return -ENODEV;
+
+	/* Initialize platform data */
+	pdata = &rsmu_pdata[rsmu->index];
+	pdata->lock = &rsmu->lock;
+	pdata->type = rsmu->type;
+	pdata->index = rsmu->index;
+
+	/* Initialize MFD devices */
+	cmfd = &rsmu_cdev[rsmu->index];
+	if (rsmu->type == RSMU_CM)
+		pmfd = &rsmu_cm_pdev[rsmu->index];
+	else if (rsmu->type == RSMU_SABRE)
+		pmfd = &rsmu_sabre_pdev[rsmu->index];
+	else
+		return -EINVAL;
+
+	ret = rsmu_mfd_init(rsmu, pmfd, pdata);
+	if (ret)
+		return ret;
+
+	ret = rsmu_mfd_init(rsmu, cmfd, pdata);
+	if (ret)
+		return ret;
+
+	atomic_inc(&rsmu_ndevs);
+	return 0;
+}
+
+static int rsmu_dt_init(struct rsmu_dev *rsmu)
+{
+	struct device_node *np = rsmu->dev->of_node;
+
+	rsmu->type = RSMU_NONE;
+	if (of_device_is_compatible(np, "idt,8a34000")) {
+		rsmu->type = RSMU_CM;
+	} else if (of_device_is_compatible(np, "idt,82p33810")) {
+		rsmu->type = RSMU_SABRE;
+	} else {
+		dev_err(rsmu->dev, "unknown RSMU device\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rsmu_probe(struct spi_device *client)
+{
+	struct rsmu_dev *rsmu;
+	int ret;
+
+	rsmu = devm_kzalloc(&client->dev, sizeof(struct rsmu_dev), GFP_KERNEL);
+	if (rsmu == NULL)
+		return -ENOMEM;
+
+	spi_set_drvdata(client, rsmu);
+	mutex_init(&rsmu->lock);
+	rsmu->dev = &client->dev;
+	rsmu->client = client;
+
+	ret = rsmu_dt_init(rsmu);
+	if (ret)
+		return ret;
+
+	mutex_lock(&rsmu->lock);
+	ret = rsmu_dev_init(rsmu);
+	mutex_unlock(&rsmu->lock);
+
+	if (ret == 0)
+		dev_info(rsmu->dev, "Probe %s successful\n",
+			 rsmu_name(rsmu->type));
+
+	return ret;
+}
+
+static int rsmu_remove(struct spi_device *client)
+{
+	struct rsmu_dev *rsmu = spi_get_drvdata(client);
+
+	mfd_remove_devices(&client->dev);
+	mutex_destroy(&rsmu->lock);
+	atomic_dec(&rsmu_ndevs);
+
+	return 0;
+}
+
+static const struct spi_device_id rsmu_id[] = {
+	{ "8a34000", 0 },
+	{ "82p33810", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, rsmu_id);
+
+static const struct of_device_id rsmu_of_match[] = {
+	{.compatible = "idt,8a34000", },
+	{.compatible = "idt,82p33810", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rsmu_of_match);
+
+static struct spi_driver rsmu_driver = {
+	.driver = {
+		   .name = "rsmu-spi",
+		   .of_match_table = of_match_ptr(rsmu_of_match),
+	},
+	.probe = rsmu_probe,
+	.remove	= rsmu_remove,
+	.id_table = rsmu_id,
+};
+
+static int __init rsmu_init(void)
+{
+	return spi_register_driver(&rsmu_driver);
+}
+/* init early so consumer devices can complete system boot */
+subsys_initcall(rsmu_init);
+
+static void __exit rsmu_exit(void)
+{
+	spi_unregister_driver(&rsmu_driver);
+}
+module_exit(rsmu_exit);
+
+MODULE_DESCRIPTION("Renesas SMU SPI multi-function driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/idt82p33_reg.h b/include/linux/mfd/idt82p33_reg.h
new file mode 100644
index 0000000..50872b0
--- /dev/null
+++ b/include/linux/mfd/idt82p33_reg.h
@@ -0,0 +1,116 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* idt82p33_reg.h
+ *
+ * Register Map - AN888_SMUforIEEE_SynchEther_82P33xxx_RevH.pdf
+ *
+ */
+#ifndef HAVE_IDT82P33_REG
+#define HAVE_IDT82P33_REG
+
+/* Register address */
+#define REG_ADDR(page, offset) (((page) << 0x7) | ((offset) & 0x7f))
+
+#define PAGE_ADDR 0x7F
+
+#define DPLL1_TOD_CNFG 0x134
+#define DPLL2_TOD_CNFG 0x1B4
+
+#define DPLL1_TOD_STS 0x10B
+#define DPLL2_TOD_STS 0x18B
+
+#define DPLL1_TOD_TRIGGER 0x115
+#define DPLL2_TOD_TRIGGER 0x195
+
+#define DPLL1_OPERATING_MODE_CNFG 0x120
+#define DPLL2_OPERATING_MODE_CNFG 0x1A0
+
+#define DPLL1_HOLDOVER_FREQ_CNFG 0x12C
+#define DPLL2_HOLDOVER_FREQ_CNFG 0x1AC
+
+#define DPLL1_PHASE_OFFSET_CNFG 0x143
+#define DPLL2_PHASE_OFFSET_CNFG 0x1C3
+
+#define DPLL1_SYNC_EDGE_CNFG 0x140
+#define DPLL2_SYNC_EDGE_CNFG 0x1C0
+
+#define DPLL1_INPUT_MODE_CNFG 0x116
+#define DPLL2_INPUT_MODE_CNFG 0x196
+
+#define DPLL1_OPERATING_STS 0x102
+#define DPLL2_OPERATING_STS 0x182
+
+#define DPLL1_CURRENT_FREQ_STS 0x103
+#define DPLL2_CURRENT_FREQ_STS 0x183
+
+#define REG_SOFT_RESET 0X381
+
+#define OUT_MUX_CNFG(outn) REG_ADDR(0x6, (0xC * (outn)))
+
+/* Register bit definitions */
+#define SYNC_TOD BIT(1)
+#define PH_OFFSET_EN BIT(7)
+#define SQUELCH_ENABLE BIT(5)
+
+/* Bit definitions for the DPLL_MODE register */
+#define PLL_MODE_SHIFT		(0)
+#define PLL_MODE_MASK		(0x1F)
+#define COMBO_MODE_EN		BIT(5)
+#define COMBO_MODE_SHIFT	(6)
+#define COMBO_MODE_MASK		(0x3)
+
+/* Bit definitions for DPLL_OPERATING_STS register */
+#define OPERATING_STS_MASK	(0x7)
+#define OPERATING_STS_SHIFT	(0x0)
+
+/* Bit definitions for DPLL_TOD_TRIGGER register */
+#define READ_TRIGGER_MASK	(0xF)
+#define READ_TRIGGER_SHIFT	(0x0)
+#define WRITE_TRIGGER_MASK	(0xF0)
+#define WRITE_TRIGGER_SHIFT	(0x4)
+
+/* Bit definitions for REG_SOFT_RESET register */
+#define SOFT_RESET_EN		BIT(7)
+
+enum pll_mode {
+	PLL_MODE_MIN = 0,
+	PLL_MODE_AUTOMATIC = PLL_MODE_MIN,
+	PLL_MODE_FORCE_FREERUN = 1,
+	PLL_MODE_FORCE_HOLDOVER = 2,
+	PLL_MODE_FORCE_LOCKED = 4,
+	PLL_MODE_FORCE_PRE_LOCKED2 = 5,
+	PLL_MODE_FORCE_PRE_LOCKED = 6,
+	PLL_MODE_FORCE_LOST_PHASE = 7,
+	PLL_MODE_DCO = 10,
+	PLL_MODE_WPH = 18,
+	PLL_MODE_MAX = PLL_MODE_WPH,
+};
+
+enum hw_tod_trig_sel {
+	HW_TOD_TRIG_SEL_MIN = 0,
+	HW_TOD_TRIG_SEL_NO_WRITE = HW_TOD_TRIG_SEL_MIN,
+	HW_TOD_TRIG_SEL_NO_READ = HW_TOD_TRIG_SEL_MIN,
+	HW_TOD_TRIG_SEL_SYNC_SEL = 1,
+	HW_TOD_TRIG_SEL_IN12 = 2,
+	HW_TOD_TRIG_SEL_IN13 = 3,
+	HW_TOD_TRIG_SEL_IN14 = 4,
+	HW_TOD_TRIG_SEL_TOD_PPS = 5,
+	HW_TOD_TRIG_SEL_TIMER_INTERVAL = 6,
+	HW_TOD_TRIG_SEL_MSB_PHASE_OFFSET_CNFG = 7,
+	HW_TOD_TRIG_SEL_MSB_HOLDOVER_FREQ_CNFG = 8,
+	HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG = 9,
+	HW_TOD_RD_TRIG_SEL_LSB_TOD_STS = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
+	WR_TRIG_SEL_MAX = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
+};
+
+/** @brief Enumerated type listing DPLL operational modes */
+enum dpll_state {
+	DPLL_STATE_FREERUN = 1,
+	DPLL_STATE_HOLDOVER = 2,
+	DPLL_STATE_LOCKED = 4,
+	DPLL_STATE_PRELOCKED2 = 5,
+	DPLL_STATE_PRELOCKED = 6,
+	DPLL_STATE_LOSTPHASE = 7,
+	DPLL_STATE_MAX
+};
+
+#endif
diff --git a/include/linux/mfd/idt8a340_reg.h b/include/linux/mfd/idt8a340_reg.h
new file mode 100644
index 0000000..e8868cd
--- /dev/null
+++ b/include/linux/mfd/idt8a340_reg.h
@@ -0,0 +1,817 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* idt8a340_reg.h
+ *
+ * Originally generated by regen.tcl on Thu Feb 14 19:23:44 PST 2019
+ * https://github.com/richardcochran/regen
+ *
+ * Hand modified to include some HW registers.
+ * Based on 4.8.0, SCSR rev C commit a03c7ae5
+ */
+#ifndef HAVE_IDT8A340_REG
+#define HAVE_IDT8A340_REG
+
+#define PAGE_ADDR_BASE                    0x0000
+#define PAGE_ADDR                         0x00fc
+
+#define HW_REVISION                       0x8180
+#define REV_ID                            0x007a
+
+#define HW_DPLL_0                         (0x8a00)
+#define HW_DPLL_1                         (0x8b00)
+#define HW_DPLL_2                         (0x8c00)
+#define HW_DPLL_3                         (0x8d00)
+#define HW_DPLL_4                         (0x8e00)
+#define HW_DPLL_5                         (0x8f00)
+#define HW_DPLL_6                         (0x9000)
+#define HW_DPLL_7                         (0x9100)
+
+#define HW_DPLL_TOD_SW_TRIG_ADDR__0       (0x080)
+#define HW_DPLL_TOD_CTRL_1                (0x089)
+#define HW_DPLL_TOD_CTRL_2                (0x08A)
+#define HW_DPLL_TOD_OVR__0                (0x098)
+#define HW_DPLL_TOD_OUT_0__0              (0x0B0)
+
+#define HW_Q0_Q1_CH_SYNC_CTRL_0           (0xa740)
+#define HW_Q0_Q1_CH_SYNC_CTRL_1           (0xa741)
+#define HW_Q2_Q3_CH_SYNC_CTRL_0           (0xa742)
+#define HW_Q2_Q3_CH_SYNC_CTRL_1           (0xa743)
+#define HW_Q4_Q5_CH_SYNC_CTRL_0           (0xa744)
+#define HW_Q4_Q5_CH_SYNC_CTRL_1           (0xa745)
+#define HW_Q6_Q7_CH_SYNC_CTRL_0           (0xa746)
+#define HW_Q6_Q7_CH_SYNC_CTRL_1           (0xa747)
+#define HW_Q8_CH_SYNC_CTRL_0              (0xa748)
+#define HW_Q8_CH_SYNC_CTRL_1              (0xa749)
+#define HW_Q9_CH_SYNC_CTRL_0              (0xa74a)
+#define HW_Q9_CH_SYNC_CTRL_1              (0xa74b)
+#define HW_Q10_CH_SYNC_CTRL_0             (0xa74c)
+#define HW_Q10_CH_SYNC_CTRL_1             (0xa74d)
+#define HW_Q11_CH_SYNC_CTRL_0             (0xa74e)
+#define HW_Q11_CH_SYNC_CTRL_1             (0xa74f)
+
+#define SYNC_SOURCE_DPLL0_TOD_PPS	0x14
+#define SYNC_SOURCE_DPLL1_TOD_PPS	0x15
+#define SYNC_SOURCE_DPLL2_TOD_PPS	0x16
+#define SYNC_SOURCE_DPLL3_TOD_PPS	0x17
+
+#define SYNCTRL1_MASTER_SYNC_RST	BIT(7)
+#define SYNCTRL1_MASTER_SYNC_TRIG	BIT(5)
+#define SYNCTRL1_TOD_SYNC_TRIG		BIT(4)
+#define SYNCTRL1_FBDIV_FRAME_SYNC_TRIG	BIT(3)
+#define SYNCTRL1_FBDIV_SYNC_TRIG	BIT(2)
+#define SYNCTRL1_Q1_DIV_SYNC_TRIG	BIT(1)
+#define SYNCTRL1_Q0_DIV_SYNC_TRIG	BIT(0)
+
+#define HW_Q8_CTRL_SPARE  (0xa7d4)
+#define HW_Q11_CTRL_SPARE (0xa7ec)
+
+/**
+ * Select FOD5 as sync_trigger for Q8 divider.
+ * Transition from logic zero to one
+ * sets trigger to sync Q8 divider.
+ *
+ * Unused when FOD4 is driving Q8 divider (normal operation).
+ */
+#define Q9_TO_Q8_SYNC_TRIG  BIT(1)
+
+/**
+ * Enable FOD5 as driver for clock and sync for Q8 divider.
+ * Enable fanout buffer for FOD5.
+ *
+ * Unused when FOD4 is driving Q8 divider (normal operation).
+ */
+#define Q9_TO_Q8_FANOUT_AND_CLOCK_SYNC_ENABLE_MASK  (BIT(0) | BIT(2))
+
+/**
+ * Select FOD6 as sync_trigger for Q11 divider.
+ * Transition from logic zero to one
+ * sets trigger to sync Q11 divider.
+ *
+ * Unused when FOD7 is driving Q11 divider (normal operation).
+ */
+#define Q10_TO_Q11_SYNC_TRIG  BIT(1)
+
+/**
+ * Enable FOD6 as driver for clock and sync for Q11 divider.
+ * Enable fanout buffer for FOD6.
+ *
+ * Unused when FOD7 is driving Q11 divider (normal operation).
+ */
+#define Q10_TO_Q11_FANOUT_AND_CLOCK_SYNC_ENABLE_MASK  (BIT(0) | BIT(2))
+
+#define RESET_CTRL                        0xc000
+#define SM_RESET                          0x0012
+#define SM_RESET_CMD                      0x5A
+
+#define GENERAL_STATUS                    0xc014
+#define BOOT_STATUS                       0x0000
+#define HW_REV_ID                         0x000A
+#define BOND_ID                           0x000B
+#define HW_CSR_ID                         0x000C
+#define HW_IRQ_ID                         0x000E
+
+#define MAJ_REL                           0x0010
+#define MIN_REL                           0x0011
+#define HOTFIX_REL                        0x0012
+
+#define PIPELINE_ID                       0x0014
+#define BUILD_ID                          0x0018
+
+#define JTAG_DEVICE_ID                    0x001c
+#define PRODUCT_ID                        0x001e
+
+#define OTP_SCSR_CONFIG_SELECT            0x0022
+
+#define STATUS                            0xc03c
+#define DPLL0_STATUS			  0x0018
+#define DPLL1_STATUS			  0x0019
+#define DPLL2_STATUS			  0x001a
+#define DPLL3_STATUS			  0x001b
+#define DPLL4_STATUS			  0x001c
+#define DPLL5_STATUS			  0x001d
+#define DPLL6_STATUS			  0x001e
+#define DPLL7_STATUS			  0x001f
+#define DPLL_SYS_STATUS                   0x0020
+#define DPLL_SYS_APLL_STATUS              0x0021
+#define DPLL0_FILTER_STATUS               0x0044
+#define DPLL1_FILTER_STATUS               0x004c
+#define DPLL2_FILTER_STATUS               0x0054
+#define DPLL3_FILTER_STATUS               0x005c
+#define DPLL4_FILTER_STATUS               0x0064
+#define DPLL5_FILTER_STATUS               0x006c
+#define DPLL6_FILTER_STATUS               0x0074
+#define DPLL7_FILTER_STATUS               0x007c
+#define DPLLSYS_FILTER_STATUS             0x0084
+#define USER_GPIO0_TO_7_STATUS            0x008a
+#define USER_GPIO8_TO_15_STATUS           0x008b
+
+#define GPIO_USER_CONTROL                 0xc160
+#define GPIO0_TO_7_OUT                    0x0000
+#define GPIO8_TO_15_OUT                   0x0001
+
+#define STICKY_STATUS_CLEAR               0xc164
+
+#define GPIO_TOD_NOTIFICATION_CLEAR       0xc16c
+
+#define ALERT_CFG                         0xc188
+
+#define SYS_DPLL_XO                       0xc194
+
+#define SYS_APLL                          0xc19c
+
+#define INPUT_0                           0xc1b0
+
+#define INPUT_1                           0xc1c0
+
+#define INPUT_2                           0xc1d0
+
+#define INPUT_3                           0xc200
+
+#define INPUT_4                           0xc210
+
+#define INPUT_5                           0xc220
+
+#define INPUT_6                           0xc230
+
+#define INPUT_7                           0xc240
+
+#define INPUT_8                           0xc250
+
+#define INPUT_9                           0xc260
+
+#define INPUT_10                          0xc280
+
+#define INPUT_11                          0xc290
+
+#define INPUT_12                          0xc2a0
+
+#define INPUT_13                          0xc2b0
+
+#define INPUT_14                          0xc2c0
+
+#define INPUT_15                          0xc2d0
+
+#define REF_MON_0                         0xc2e0
+
+#define REF_MON_1                         0xc2ec
+
+#define REF_MON_2                         0xc300
+
+#define REF_MON_3                         0xc30c
+
+#define REF_MON_4                         0xc318
+
+#define REF_MON_5                         0xc324
+
+#define REF_MON_6                         0xc330
+
+#define REF_MON_7                         0xc33c
+
+#define REF_MON_8                         0xc348
+
+#define REF_MON_9                         0xc354
+
+#define REF_MON_10                        0xc360
+
+#define REF_MON_11                        0xc36c
+
+#define REF_MON_12                        0xc380
+
+#define REF_MON_13                        0xc38c
+
+#define REF_MON_14                        0xc398
+
+#define REF_MON_15                        0xc3a4
+
+#define DPLL_0                            0xc3b0
+#define DPLL_CTRL_REG_0                   0x0002
+#define DPLL_CTRL_REG_1                   0x0003
+#define DPLL_CTRL_REG_2                   0x0004
+#define DPLL_TOD_SYNC_CFG                 0x0031
+#define DPLL_COMBO_SLAVE_CFG_0            0x0032
+#define DPLL_COMBO_SLAVE_CFG_1            0x0033
+#define DPLL_SLAVE_REF_CFG                0x0034
+#define DPLL_REF_MODE                     0x0035
+#define DPLL_PHASE_MEASUREMENT_CFG        0x0036
+#define DPLL_MODE                         0x0037
+
+#define DPLL_1                            0xc400
+
+#define DPLL_2                            0xc438
+
+#define DPLL_3                            0xc480
+
+#define DPLL_4                            0xc4b8
+
+#define DPLL_5                            0xc500
+
+#define DPLL_6                            0xc538
+
+#define DPLL_7                            0xc580
+
+#define SYS_DPLL                          0xc5b8
+
+#define DPLL_CTRL_0                       0xc600
+#define DPLL_CTRL_DPLL_MANU_REF_CFG       0x0001
+#define DPLL_CTRL_DPLL_FOD_FREQ           0x001c
+#define DPLL_CTRL_COMBO_MASTER_CFG        0x003a
+
+#define DPLL_CTRL_1                       0xc63c
+
+#define DPLL_CTRL_2                       0xc680
+
+#define DPLL_CTRL_3                       0xc6bc
+
+#define DPLL_CTRL_4                       0xc700
+
+#define DPLL_CTRL_5                       0xc73c
+
+#define DPLL_CTRL_6                       0xc780
+
+#define DPLL_CTRL_7                       0xc7bc
+
+#define SYS_DPLL_CTRL                     0xc800
+
+#define DPLL_PHASE_0                      0xc818
+
+/* Signed 42-bit FFO in units of 2^(-53) */
+#define DPLL_WR_PHASE                     0x0000
+
+#define DPLL_PHASE_1                      0xc81c
+
+#define DPLL_PHASE_2                      0xc820
+
+#define DPLL_PHASE_3                      0xc824
+
+#define DPLL_PHASE_4                      0xc828
+
+#define DPLL_PHASE_5                      0xc82c
+
+#define DPLL_PHASE_6                      0xc830
+
+#define DPLL_PHASE_7                      0xc834
+
+#define DPLL_FREQ_0                       0xc838
+
+/* Signed 42-bit FFO in units of 2^(-53) */
+#define DPLL_WR_FREQ                      0x0000
+
+#define DPLL_FREQ_1                       0xc840
+
+#define DPLL_FREQ_2                       0xc848
+
+#define DPLL_FREQ_3                       0xc850
+
+#define DPLL_FREQ_4                       0xc858
+
+#define DPLL_FREQ_5                       0xc860
+
+#define DPLL_FREQ_6                       0xc868
+
+#define DPLL_FREQ_7                       0xc870
+
+#define DPLL_PHASE_PULL_IN_0              0xc880
+#define PULL_IN_OFFSET                    0x0000 /* Signed 32 bit */
+#define PULL_IN_SLOPE_LIMIT               0x0004 /* Unsigned 24 bit */
+#define PULL_IN_CTRL                      0x0007
+
+#define DPLL_PHASE_PULL_IN_1              0xc888
+
+#define DPLL_PHASE_PULL_IN_2              0xc890
+
+#define DPLL_PHASE_PULL_IN_3              0xc898
+
+#define DPLL_PHASE_PULL_IN_4              0xc8a0
+
+#define DPLL_PHASE_PULL_IN_5              0xc8a8
+
+#define DPLL_PHASE_PULL_IN_6              0xc8b0
+
+#define DPLL_PHASE_PULL_IN_7              0xc8b8
+
+#define GPIO_CFG                          0xc8c0
+#define GPIO_CFG_GBL                      0x0000
+
+#define GPIO_0                            0xc8c2
+#define GPIO_DCO_INC_DEC                  0x0000
+#define GPIO_OUT_CTRL_0                   0x0001
+#define GPIO_OUT_CTRL_1                   0x0002
+#define GPIO_TOD_TRIG                     0x0003
+#define GPIO_DPLL_INDICATOR               0x0004
+#define GPIO_LOS_INDICATOR                0x0005
+#define GPIO_REF_INPUT_DSQ_0              0x0006
+#define GPIO_REF_INPUT_DSQ_1              0x0007
+#define GPIO_REF_INPUT_DSQ_2              0x0008
+#define GPIO_REF_INPUT_DSQ_3              0x0009
+#define GPIO_MAN_CLK_SEL_0                0x000a
+#define GPIO_MAN_CLK_SEL_1                0x000b
+#define GPIO_MAN_CLK_SEL_2                0x000c
+#define GPIO_SLAVE                        0x000d
+#define GPIO_ALERT_OUT_CFG                0x000e
+#define GPIO_TOD_NOTIFICATION_CFG         0x000f
+#define GPIO_CTRL                         0x0010
+
+#define GPIO_1                            0xc8d4
+
+#define GPIO_2                            0xc8e6
+
+#define GPIO_3                            0xc900
+
+#define GPIO_4                            0xc912
+
+#define GPIO_5                            0xc924
+
+#define GPIO_6                            0xc936
+
+#define GPIO_7                            0xc948
+
+#define GPIO_8                            0xc95a
+
+#define GPIO_9                            0xc980
+
+#define GPIO_10                           0xc992
+
+#define GPIO_11                           0xc9a4
+
+#define GPIO_12                           0xc9b6
+
+#define GPIO_13                           0xc9c8
+
+#define GPIO_14                           0xc9da
+
+#define GPIO_15                           0xca00
+
+#define OUT_DIV_MUX                       0xca12
+
+#define OUTPUT_0                          0xca14
+/* FOD frequency output divider value */
+#define OUT_DIV                           0x0000
+#define OUT_DUTY_CYCLE_HIGH               0x0004
+#define OUT_CTRL_0                        0x0008
+#define OUT_CTRL_1                        0x0009
+/* Phase adjustment in FOD cycles */
+#define OUT_PHASE_ADJ                     0x000c
+
+#define OUTPUT_1                          0xca24
+
+#define OUTPUT_2                          0xca34
+
+#define OUTPUT_3                          0xca44
+
+#define OUTPUT_4                          0xca54
+
+#define OUTPUT_5                          0xca64
+
+#define OUTPUT_6                          0xca80
+
+#define OUTPUT_7                          0xca90
+
+#define OUTPUT_8                          0xcaa0
+
+#define OUTPUT_9                          0xcab0
+
+#define OUTPUT_10                         0xcac0
+
+#define OUTPUT_11                         0xcad0
+
+#define SERIAL                            0xcae0
+
+#define PWM_ENCODER_0                     0xcb00
+
+#define PWM_ENCODER_1                     0xcb08
+
+#define PWM_ENCODER_2                     0xcb10
+
+#define PWM_ENCODER_3                     0xcb18
+
+#define PWM_ENCODER_4                     0xcb20
+
+#define PWM_ENCODER_5                     0xcb28
+
+#define PWM_ENCODER_6                     0xcb30
+
+#define PWM_ENCODER_7                     0xcb38
+
+#define PWM_DECODER_0                     0xcb40
+
+#define PWM_DECODER_1                     0xcb48
+
+#define PWM_DECODER_2                     0xcb50
+
+#define PWM_DECODER_3                     0xcb58
+
+#define PWM_DECODER_4                     0xcb60
+
+#define PWM_DECODER_5                     0xcb68
+
+#define PWM_DECODER_6                     0xcb70
+
+#define PWM_DECODER_7                     0xcb80
+
+#define PWM_DECODER_8                     0xcb88
+
+#define PWM_DECODER_9                     0xcb90
+
+#define PWM_DECODER_10                    0xcb98
+
+#define PWM_DECODER_11                    0xcba0
+
+#define PWM_DECODER_12                    0xcba8
+
+#define PWM_DECODER_13                    0xcbb0
+
+#define PWM_DECODER_14                    0xcbb8
+
+#define PWM_DECODER_15                    0xcbc0
+
+#define PWM_USER_DATA                     0xcbc8
+
+#define TOD_0                             0xcbcc
+
+/* Enable TOD counter, output channel sync and even-PPS mode */
+#define TOD_CFG                           0x0000
+
+#define TOD_1                             0xcbce
+
+#define TOD_2                             0xcbd0
+
+#define TOD_3                             0xcbd2
+
+
+#define TOD_WRITE_0                       0xcc00
+/* 8-bit subns, 32-bit ns, 48-bit seconds */
+#define TOD_WRITE                         0x0000
+/* Counter increments after TOD write is completed */
+#define TOD_WRITE_COUNTER                 0x000c
+/* TOD write trigger configuration */
+#define TOD_WRITE_SELECT_CFG_0            0x000d
+/* TOD write trigger selection */
+#define TOD_WRITE_CMD                     0x000f
+
+#define TOD_WRITE_1                       0xcc10
+
+#define TOD_WRITE_2                       0xcc20
+
+#define TOD_WRITE_3                       0xcc30
+
+#define TOD_READ_PRIMARY_0                0xcc40
+/* 8-bit subns, 32-bit ns, 48-bit seconds */
+#define TOD_READ_PRIMARY                  0x0000
+/* Counter increments after TOD write is completed */
+#define TOD_READ_PRIMARY_COUNTER          0x000b
+/* Read trigger configuration */
+#define TOD_READ_PRIMARY_SEL_CFG_0        0x000c
+/* Read trigger selection */
+#define TOD_READ_PRIMARY_CMD              0x000e
+
+#define TOD_READ_PRIMARY_1                0xcc50
+
+#define TOD_READ_PRIMARY_2                0xcc60
+
+#define TOD_READ_PRIMARY_3                0xcc80
+
+#define TOD_READ_SECONDARY_0              0xcc90
+
+#define TOD_READ_SECONDARY_1              0xcca0
+
+#define TOD_READ_SECONDARY_2              0xccb0
+
+#define TOD_READ_SECONDARY_3              0xccc0
+
+#define OUTPUT_TDC_CFG                    0xccd0
+
+#define OUTPUT_TDC_0                      0xcd00
+
+#define OUTPUT_TDC_1                      0xcd08
+
+#define OUTPUT_TDC_2                      0xcd10
+
+#define OUTPUT_TDC_3                      0xcd18
+
+#define INPUT_TDC                         0xcd20
+
+#define SCRATCH                           0xcf50
+
+#define EEPROM                            0xcf68
+
+#define OTP                               0xcf70
+
+#define BYTE                              0xcf80
+
+/* Bit definitions for the MAJ_REL register */
+#define MAJOR_SHIFT                       (1)
+#define MAJOR_MASK                        (0x7f)
+#define PR_BUILD                          BIT(0)
+
+/* Bit definitions for the USER_GPIO0_TO_7_STATUS register */
+#define GPIO0_LEVEL                       BIT(0)
+#define GPIO1_LEVEL                       BIT(1)
+#define GPIO2_LEVEL                       BIT(2)
+#define GPIO3_LEVEL                       BIT(3)
+#define GPIO4_LEVEL                       BIT(4)
+#define GPIO5_LEVEL                       BIT(5)
+#define GPIO6_LEVEL                       BIT(6)
+#define GPIO7_LEVEL                       BIT(7)
+
+/* Bit definitions for the USER_GPIO8_TO_15_STATUS register */
+#define GPIO8_LEVEL                       BIT(0)
+#define GPIO9_LEVEL                       BIT(1)
+#define GPIO10_LEVEL                      BIT(2)
+#define GPIO11_LEVEL                      BIT(3)
+#define GPIO12_LEVEL                      BIT(4)
+#define GPIO13_LEVEL                      BIT(5)
+#define GPIO14_LEVEL                      BIT(6)
+#define GPIO15_LEVEL                      BIT(7)
+
+/* Bit definitions for the GPIO0_TO_7_OUT register */
+#define GPIO0_DRIVE_LEVEL                 BIT(0)
+#define GPIO1_DRIVE_LEVEL                 BIT(1)
+#define GPIO2_DRIVE_LEVEL                 BIT(2)
+#define GPIO3_DRIVE_LEVEL                 BIT(3)
+#define GPIO4_DRIVE_LEVEL                 BIT(4)
+#define GPIO5_DRIVE_LEVEL                 BIT(5)
+#define GPIO6_DRIVE_LEVEL                 BIT(6)
+#define GPIO7_DRIVE_LEVEL                 BIT(7)
+
+/* Bit definitions for the GPIO8_TO_15_OUT register */
+#define GPIO8_DRIVE_LEVEL                 BIT(0)
+#define GPIO9_DRIVE_LEVEL                 BIT(1)
+#define GPIO10_DRIVE_LEVEL                BIT(2)
+#define GPIO11_DRIVE_LEVEL                BIT(3)
+#define GPIO12_DRIVE_LEVEL                BIT(4)
+#define GPIO13_DRIVE_LEVEL                BIT(5)
+#define GPIO14_DRIVE_LEVEL                BIT(6)
+#define GPIO15_DRIVE_LEVEL                BIT(7)
+
+/* Bit definitions for the DPLL_TOD_SYNC_CFG register */
+#define TOD_SYNC_SOURCE_SHIFT             (1)
+#define TOD_SYNC_SOURCE_MASK              (0x3)
+#define TOD_SYNC_EN                       BIT(0)
+
+/* Bit definitions for the DPLL_MODE register */
+#define WRITE_TIMER_MODE                  BIT(6)
+#define PLL_MODE_SHIFT                    (3)
+#define PLL_MODE_MASK                     (0x7)
+#define STATE_MODE_SHIFT                  (0)
+#define STATE_MODE_MASK                   (0x7)
+
+/* Bit definitions for the GPIO_CFG_GBL register */
+#define SUPPLY_MODE_SHIFT                 (0)
+#define SUPPLY_MODE_MASK                  (0x3)
+
+/* Bit definitions for the GPIO_DCO_INC_DEC register */
+#define INCDEC_DPLL_INDEX_SHIFT           (0)
+#define INCDEC_DPLL_INDEX_MASK            (0x7)
+
+/* Bit definitions for the GPIO_OUT_CTRL_0 register */
+#define CTRL_OUT_0                        BIT(0)
+#define CTRL_OUT_1                        BIT(1)
+#define CTRL_OUT_2                        BIT(2)
+#define CTRL_OUT_3                        BIT(3)
+#define CTRL_OUT_4                        BIT(4)
+#define CTRL_OUT_5                        BIT(5)
+#define CTRL_OUT_6                        BIT(6)
+#define CTRL_OUT_7                        BIT(7)
+
+/* Bit definitions for the GPIO_OUT_CTRL_1 register */
+#define CTRL_OUT_8                        BIT(0)
+#define CTRL_OUT_9                        BIT(1)
+#define CTRL_OUT_10                       BIT(2)
+#define CTRL_OUT_11                       BIT(3)
+#define CTRL_OUT_12                       BIT(4)
+#define CTRL_OUT_13                       BIT(5)
+#define CTRL_OUT_14                       BIT(6)
+#define CTRL_OUT_15                       BIT(7)
+
+/* Bit definitions for the GPIO_TOD_TRIG register */
+#define TOD_TRIG_0                        BIT(0)
+#define TOD_TRIG_1                        BIT(1)
+#define TOD_TRIG_2                        BIT(2)
+#define TOD_TRIG_3                        BIT(3)
+
+/* Bit definitions for the GPIO_DPLL_INDICATOR register */
+#define IND_DPLL_INDEX_SHIFT              (0)
+#define IND_DPLL_INDEX_MASK               (0x7)
+
+/* Bit definitions for the GPIO_LOS_INDICATOR register */
+#define REFMON_INDEX_SHIFT                (0)
+#define REFMON_INDEX_MASK                 (0xf)
+/* Active level of LOS indicator, 0=low 1=high */
+#define ACTIVE_LEVEL                      BIT(4)
+
+/* Bit definitions for the GPIO_REF_INPUT_DSQ_0 register */
+#define DSQ_INP_0                         BIT(0)
+#define DSQ_INP_1                         BIT(1)
+#define DSQ_INP_2                         BIT(2)
+#define DSQ_INP_3                         BIT(3)
+#define DSQ_INP_4                         BIT(4)
+#define DSQ_INP_5                         BIT(5)
+#define DSQ_INP_6                         BIT(6)
+#define DSQ_INP_7                         BIT(7)
+
+/* Bit definitions for the GPIO_REF_INPUT_DSQ_1 register */
+#define DSQ_INP_8                         BIT(0)
+#define DSQ_INP_9                         BIT(1)
+#define DSQ_INP_10                        BIT(2)
+#define DSQ_INP_11                        BIT(3)
+#define DSQ_INP_12                        BIT(4)
+#define DSQ_INP_13                        BIT(5)
+#define DSQ_INP_14                        BIT(6)
+#define DSQ_INP_15                        BIT(7)
+
+/* Bit definitions for the GPIO_REF_INPUT_DSQ_2 register */
+#define DSQ_DPLL_0                        BIT(0)
+#define DSQ_DPLL_1                        BIT(1)
+#define DSQ_DPLL_2                        BIT(2)
+#define DSQ_DPLL_3                        BIT(3)
+#define DSQ_DPLL_4                        BIT(4)
+#define DSQ_DPLL_5                        BIT(5)
+#define DSQ_DPLL_6                        BIT(6)
+#define DSQ_DPLL_7                        BIT(7)
+
+/* Bit definitions for the GPIO_REF_INPUT_DSQ_3 register */
+#define DSQ_DPLL_SYS                      BIT(0)
+#define GPIO_DSQ_LEVEL                    BIT(1)
+
+/* Bit definitions for the GPIO_TOD_NOTIFICATION_CFG register */
+#define DPLL_TOD_SHIFT                    (0)
+#define DPLL_TOD_MASK                     (0x3)
+#define TOD_READ_SECONDARY                BIT(2)
+#define GPIO_ASSERT_LEVEL                 BIT(3)
+
+/* Bit definitions for the GPIO_CTRL register */
+#define GPIO_FUNCTION_EN                  BIT(0)
+#define GPIO_CMOS_OD_MODE                 BIT(1)
+#define GPIO_CONTROL_DIR                  BIT(2)
+#define GPIO_PU_PD_MODE                   BIT(3)
+#define GPIO_FUNCTION_SHIFT               (4)
+#define GPIO_FUNCTION_MASK                (0xf)
+
+/* Bit definitions for the OUT_CTRL_1 register */
+#define OUT_SYNC_DISABLE                  BIT(7)
+#define SQUELCH_VALUE                     BIT(6)
+#define SQUELCH_DISABLE                   BIT(5)
+#define PAD_VDDO_SHIFT                    (2)
+#define PAD_VDDO_MASK                     (0x7)
+#define PAD_CMOSDRV_SHIFT                 (0)
+#define PAD_CMOSDRV_MASK                  (0x3)
+
+/* Bit definitions for the TOD_CFG register */
+#define TOD_EVEN_PPS_MODE                 BIT(2)
+#define TOD_OUT_SYNC_ENABLE               BIT(1)
+#define TOD_ENABLE                        BIT(0)
+
+/* Bit definitions for the TOD_WRITE_SELECT_CFG_0 register */
+#define WR_PWM_DECODER_INDEX_SHIFT        (4)
+#define WR_PWM_DECODER_INDEX_MASK         (0xf)
+#define WR_REF_INDEX_SHIFT                (0)
+#define WR_REF_INDEX_MASK                 (0xf)
+
+/* Bit definitions for the TOD_WRITE_CMD register */
+#define TOD_WRITE_SELECTION_SHIFT         (0)
+#define TOD_WRITE_SELECTION_MASK          (0xf)
+/* 4.8.7 */
+#define TOD_WRITE_TYPE_SHIFT              (4)
+#define TOD_WRITE_TYPE_MASK               (0x3)
+
+/* Bit definitions for the TOD_READ_PRIMARY_SEL_CFG_0 register */
+#define RD_PWM_DECODER_INDEX_SHIFT        (4)
+#define RD_PWM_DECODER_INDEX_MASK         (0xf)
+#define RD_REF_INDEX_SHIFT                (0)
+#define RD_REF_INDEX_MASK                 (0xf)
+
+/* Bit definitions for the TOD_READ_PRIMARY_CMD register */
+#define TOD_READ_TRIGGER_MODE             BIT(4)
+#define TOD_READ_TRIGGER_SHIFT            (0)
+#define TOD_READ_TRIGGER_MASK             (0xf)
+
+/* Bit definitions for the DPLL_CTRL_COMBO_MASTER_CFG register */
+#define COMBO_MASTER_HOLD                 BIT(0)
+
+/* Bit definitions for DPLL_SYS_STATUS register */
+#define DPLL_SYS_STATE_MASK               (0xf)
+
+/* Bit definitions for SYS_APLL_STATUS register */
+#define SYS_APLL_LOSS_LOCK_LIVE_MASK       BIT(0)
+#define SYS_APLL_LOSS_LOCK_LIVE_LOCKED     0
+#define SYS_APLL_LOSS_LOCK_LIVE_UNLOCKED   1
+
+/* Bit definitions for the DPLL0_STATUS register */
+#define DPLL_STATE_MASK                   (0xf)
+#define DPLL_STATE_SHIFT                  (0x0)
+
+/* Values of DPLL_N.DPLL_MODE.PLL_MODE */
+enum pll_mode {
+	PLL_MODE_MIN = 0,
+	PLL_MODE_NORMAL = PLL_MODE_MIN,
+	PLL_MODE_WRITE_PHASE = 1,
+	PLL_MODE_WRITE_FREQUENCY = 2,
+	PLL_MODE_GPIO_INC_DEC = 3,
+	PLL_MODE_SYNTHESIS = 4,
+	PLL_MODE_PHASE_MEASUREMENT = 5,
+	PLL_MODE_DISABLED = 6,
+	PLL_MODE_MAX = PLL_MODE_DISABLED,
+};
+
+enum hw_tod_write_trig_sel {
+	HW_TOD_WR_TRIG_SEL_MIN = 0,
+	HW_TOD_WR_TRIG_SEL_MSB = HW_TOD_WR_TRIG_SEL_MIN,
+	HW_TOD_WR_TRIG_SEL_RESERVED = 1,
+	HW_TOD_WR_TRIG_SEL_TOD_PPS = 2,
+	HW_TOD_WR_TRIG_SEL_IRIGB_PPS = 3,
+	HW_TOD_WR_TRIG_SEL_PWM_PPS = 4,
+	HW_TOD_WR_TRIG_SEL_GPIO = 5,
+	HW_TOD_WR_TRIG_SEL_FOD_SYNC = 6,
+	WR_TRIG_SEL_MAX = HW_TOD_WR_TRIG_SEL_FOD_SYNC,
+};
+
+enum scsr_read_trig_sel {
+	/* CANCEL CURRENT TOD READ; MODULE BECOMES IDLE - NO TRIGGER OCCURS */
+	SCSR_TOD_READ_TRIG_SEL_DISABLE = 0,
+	/* TRIGGER IMMEDIATELY */
+	SCSR_TOD_READ_TRIG_SEL_IMMEDIATE = 1,
+	/* TRIGGER ON RISING EDGE OF INTERNAL TOD PPS SIGNAL */
+	SCSR_TOD_READ_TRIG_SEL_TODPPS = 2,
+	/* TRGGER ON RISING EDGE OF SELECTED REFERENCE INPUT */
+	SCSR_TOD_READ_TRIG_SEL_REFCLK = 3,
+	/* TRIGGER ON RISING EDGE OF SELECTED PWM DECODER 1PPS OUTPUT */
+	SCSR_TOD_READ_TRIG_SEL_PWMPPS = 4,
+	SCSR_TOD_READ_TRIG_SEL_RESERVED = 5,
+	/* TRIGGER WHEN WRITE FREQUENCY EVENT OCCURS  */
+	SCSR_TOD_READ_TRIG_SEL_WRITEFREQUENCYEVENT = 6,
+	/* TRIGGER ON SELECTED GPIO */
+	SCSR_TOD_READ_TRIG_SEL_GPIO = 7,
+	SCSR_TOD_READ_TRIG_SEL_MAX = SCSR_TOD_READ_TRIG_SEL_GPIO,
+};
+
+/* Values STATUS.DPLL_SYS_STATUS.DPLL_SYS_STATE */
+enum dpll_state {
+	DPLL_STATE_MIN = 0,
+	DPLL_STATE_FREERUN = DPLL_STATE_MIN,
+	DPLL_STATE_LOCKACQ = 1,
+	DPLL_STATE_LOCKREC = 2,
+	DPLL_STATE_LOCKED = 3,
+	DPLL_STATE_HOLDOVER = 4,
+	DPLL_STATE_OPEN_LOOP = 5,
+	DPLL_STATE_MAX = DPLL_STATE_OPEN_LOOP,
+};
+
+/* 4.8.7 only */
+enum scsr_tod_write_trig_sel {
+	SCSR_TOD_WR_TRIG_SEL_DISABLE = 0,
+	SCSR_TOD_WR_TRIG_SEL_IMMEDIATE = 1,
+	SCSR_TOD_WR_TRIG_SEL_REFCLK = 2,
+	SCSR_TOD_WR_TRIG_SEL_PWMPPS = 3,
+	SCSR_TOD_WR_TRIG_SEL_TODPPS = 4,
+	SCSR_TOD_WR_TRIG_SEL_SYNCFOD = 5,
+	SCSR_TOD_WR_TRIG_SEL_GPIO = 6,
+	SCSR_TOD_WR_TRIG_SEL_MAX = SCSR_TOD_WR_TRIG_SEL_GPIO,
+};
+
+/* 4.8.7 only */
+enum scsr_tod_write_type_sel {
+	SCSR_TOD_WR_TYPE_SEL_ABSOLUTE = 0,
+	SCSR_TOD_WR_TYPE_SEL_DELTA_PLUS = 1,
+	SCSR_TOD_WR_TYPE_SEL_DELTA_MINUS = 2,
+	SCSR_TOD_WR_TYPE_SEL_MAX = SCSR_TOD_WR_TYPE_SEL_DELTA_MINUS,
+};
+#endif
diff --git a/include/linux/mfd/rsmu.h b/include/linux/mfd/rsmu.h
new file mode 100644
index 0000000..843dd6c
--- /dev/null
+++ b/include/linux/mfd/rsmu.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Multi-function driver for the IDT ClockMatrix(TM) and 82p33xxx families of
+ * timing and synchronization devices.
+ *
+ * Copyright (C) 2019 Integrated Device Technology, Inc., a Renesas Company.
+ */
+
+#ifndef __LINUX_MFD_RSMU_H
+#define __LINUX_MFD_RSMU_H
+
+/* We only support Clockmatrix and Sabre now */
+enum rsmu_type {
+	RSMU_CM		= 0,
+	RSMU_SABRE	= 1,
+	RSMU_NONE	= 2,
+};
+
+/**
+ *
+ * struct rsmu_pdata - platform data structure for MFD cell devices.
+ *
+ * @lock: Mutex used by cell devices to make sure a series of requests
+ * are not interrupted.
+ *
+ * @type: RSMU device type.
+ *
+ * @index: Device index.
+ */
+struct rsmu_pdata {
+	enum rsmu_type type;
+	struct mutex *lock;
+	u8 index;
+};
+
+static inline char *rsmu_name(enum rsmu_type type)
+{
+	switch (type) {
+	case RSMU_CM:
+		return "ClockMatrix";
+	case RSMU_SABRE:
+		return "Sabre";
+	default:
+		return "Unknown SMU";
+	}
+}
+
+/**
+ * NOTE: the functions below are not intended for use outside
+ * of the IDT synchronization management unit drivers
+ */
+extern int rsmu_write(struct device *dev, u16 reg, u8 *buf, u16 size);
+extern int rsmu_read(struct device *dev, u16 reg, u8 *buf, u16 size);
+#endif /*  __LINUX_MFD_RSMU_H */
-- 
2.7.4





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux