Re: [PATCH 09/16] media: cadence: csi2rx: Turn subdev power on before starting stream

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/04/21 01:55PM, Laurent Pinchart wrote:
> Hi Pratyush,
> 
> Thank you for the patch.
> 
> On Tue, Mar 30, 2021 at 11:03:41PM +0530, Pratyush Yadav wrote:
> > The subdevice power needs to be turned on before the stream is started.
> > Otherwise it might not be in the proper state to stream the data. Turn
> > it off when stopping the stream.
> 
> The .s_power() operation is deprecated. Subdev drivers should control
> power internally in their .s_stream() operation, and they should use
> runtime PM to do so (this will allow usage of runtime PM autosuspend, to
> avoid expensive power off/on cycles when stopping and restarting video
> capture).

The s_power documentation in v4l2-subdev.h does not mention that it is 
depreciated. A documentation update is in order. I will send a separate 
patch to do it.

I tested this with OV5640. Not doing an s_power() operation before 
s_stream() does not work. The application freezes forever waiting for 
the first frame. So the OV5640 driver needs to be updated to use runtime 
PM to do this, right?

> 
> > Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx>
> > ---
> >  drivers/media/platform/cadence/cdns-csi2rx.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> > diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
> > index 7d1ac51e0698..3385e1bc213e 100644
> > --- a/drivers/media/platform/cadence/cdns-csi2rx.c
> > +++ b/drivers/media/platform/cadence/cdns-csi2rx.c
> > @@ -256,6 +256,10 @@ static int csi2rx_start(struct csi2rx_priv *csi2rx)
> >  
> >  	writel(reg, csi2rx->base + CSI2RX_STATIC_CFG_REG);
> >  
> > +	ret = v4l2_subdev_call(csi2rx->source_subdev, core, s_power, true);
> > +	if (ret && ret != -ENOIOCTLCMD)
> > +		goto err_disable_pclk;
> > +
> >  	ret = v4l2_subdev_call(csi2rx->source_subdev, video, s_stream, true);
> >  	if (ret)
> >  		goto err_disable_pclk;
> > @@ -358,6 +362,10 @@ static void csi2rx_stop(struct csi2rx_priv *csi2rx)
> >  	if (v4l2_subdev_call(csi2rx->source_subdev, video, s_stream, false))
> >  		dev_warn(csi2rx->dev, "Couldn't disable our subdev\n");
> >  
> > +	ret = v4l2_subdev_call(csi2rx->source_subdev, core, s_power, false);
> > +	if (ret && ret != -ENOIOCTLCMD)
> > +		dev_warn(csi2rx->dev, "Couldn't power off subdev\n");
> > +
> >  	if (csi2rx->dphy) {
> >  		writel(0, csi2rx->base + CSI2RX_DPHY_LANE_CTRL_REG);
> >  
> 
> -- 
> Regards,
> 
> Laurent Pinchart

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux