On Mon, 05 Apr 2021 16:36:09 +0530, Krishna Manikandan wrote: > Add YAML schema for the device tree bindings for DSI PHY. > > Signed-off-by: Krishna Manikandan <mkrishn@xxxxxxxxxxxxxx> > > Changes in v1: > - Merge dsi-phy.yaml and dsi-phy-10nm.yaml (Stephen Boyd) > - Remove qcom,dsi-phy-regulator-ldo-mode (Stephen Boyd) > - Add clock cells properly (Stephen Boyd) > - Remove unnecessary decription from clock names (Stephen Boyd) > - Add pin names for the supply entries for 10nm phy which is > used in sc7180 and sdm845 (Stephen Boyd) > - Remove unused header files from examples (Stephen Boyd) > - Drop labels for display nodes and correct node name (Stephen Boyd) > > Changes in v2: > - Drop maxItems for clock (Stephen Boyd) > - Add vdds supply pin information for sdm845 (Stephen Boyd) > - Add examples for 14nm, 20nm and 28nm phy yaml files (Stephen Boyd) > - Keep child nodes directly under soc node (Stephen Boyd) > > Changes in v3: > - Use a separate yaml file to describe the common properties > for all the dsi phy versions (Stephen Boyd) > - Remove soc from examples (Stephen Boyd) > - Add description for register property > > Changes in v4: > - Modify the title for all the phy versions (Stephen Boyd) > - Drop description for all the phy versions (Stephen Boyd) > - Modify the description for register property (Stephen Boyd) > > Changes in v5: > - Remove unused properties from common dsi phy file > - Add clock-cells and phy-cells to required property > list (Stephen Boyd) > --- > .../bindings/display/msm/dsi-phy-10nm.yaml | 68 +++++++++++++++++++++ > .../bindings/display/msm/dsi-phy-14nm.yaml | 66 ++++++++++++++++++++ > .../bindings/display/msm/dsi-phy-20nm.yaml | 71 ++++++++++++++++++++++ > .../bindings/display/msm/dsi-phy-28nm.yaml | 68 +++++++++++++++++++++ > .../bindings/display/msm/dsi-phy-common.yaml | 40 ++++++++++++ > 5 files changed, 313 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml > create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml > create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml > create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml > create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.example.dt.yaml:0:0: /example-0/dsi-phy@fd922a00: failed to match any schema with compatible: ['qcom,dsi-phy-28nm'] See https://patchwork.ozlabs.org/patch/1462327 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
