From: Gao Pan <pandy.gao@xxxxxxx>
add debug message when i2c peripheral clk rate is 0, then
directly return -EINVAL.
Signed-off-by: Clark Wang <xiaoning.wang@xxxxxxx>
Signed-off-by: Gao Pan <pandy.gao@xxxxxxx>
Reviewed-by: Andy Duan <fugang.duan@xxxxxxx>
---
V2 changes:
- Add my signed-off.
---
drivers/i2c/busses/i2c-imx-lpi2c.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index 333209ba81c1..dfec334712c2 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -210,6 +210,11 @@ static int lpi2c_imx_config(struct lpi2c_imx_struct *lpi2c_imx)
lpi2c_imx_set_mode(lpi2c_imx);
clk_rate = clk_get_rate(lpi2c_imx->clk_per);
+ if (!clk_rate) {
+ dev_dbg(&lpi2c_imx->adapter.dev, "clk_per rate is 0\n");
+ return -EINVAL;
+ }
+
if (lpi2c_imx->mode == HS || lpi2c_imx->mode == ULTRA_FAST)
filt = 0;
else
--
2.25.1
