[PATCH] rockchip: enabled LAN port on NanoPi R2S

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: David Bauer <mail@xxxxxxxxxxxxxxx>

Enable the USB3 port on the FriendlyARM NanoPi R2S.
This is required for the USB3 attached LAN port to work.

Signed-off-by: David Bauer <mail@xxxxxxxxxxxxxxx>
Signed-off-by: Tianling Shen <cnsztl@xxxxxxxxx>
---
 .../boot/dts/rockchip/rk3328-nanopi-r2s.dts   | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
index faf496d789cf..6ba9799a95c5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
@@ -37,6 +37,18 @@
 		};
 	};
 
+	vcc_rtl8153: vcc-rtl8153-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8153_en_drv>;
+		regulator-always-on;
+		regulator-name = "vcc_rtl8153";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-0 = <&lan_led_pin>,  <&sys_led_pin>, <&wan_led_pin>;
@@ -265,6 +277,12 @@
 			};
 		};
 	};
+
+	usb {
+		rtl8153_en_drv: rtl8153-en-drv {
+			rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &io_domains {
@@ -364,6 +382,11 @@
 	dr_mode = "host";
 };
 
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &usb_host0_ehci {
 	status = "okay";
 };
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux