Hi Kosta, > From: Konstantin Porotchkin <kostap@xxxxxxxxxxx> > > This series of patches adds a new PHY driver for supporting CP110 UTMI > PHY in Linux. Currently the functionality of USB ports connected to > this PHY depends on boot loader setup. > The new driver eliminates kernel configuration dependency from the boot > loader. > > v3: > - rebase on top of Linux 5.12-rc2 > - convert Armada 3700 UTMI PHY DT binding document to YAML schema > - create a separate DT binding for Armada CP11x UTMI PHY in YAML format > - change UTMI PHY port node names from "phy" to "usb-phy" > > v2: > - extend the comment about reference clock > - fix driver probe function, add some prints > - move to usage of dr_mode from connected USB controller instead of > dedicated device tree property > > Konstantin Porotchkin (5): > drivers: phy: add support for Armada CP110 UTMI PHY > dt-bindings: phy: convert phy-mvebu-utmi to YAML schema > devicetree/bindings: add support for CP110 UTMI PHY > arch/arm64: dts: add support for Marvell CP110 UTMI PHY > arch/arm64: dts: enable CP110 UTMI PHY usage Patch 4 and 5 applied on mvebu/dt64. I've just modified the title to align with the other commits in arch/arm64/boot/dts/marvell. They now begin by "arm64: dts: marvell:". Thanks, Gregory > > .../phy/marvell,armada-3700-utmi-phy.yaml | 57 +++ > .../phy/marvell,armada-cp110-utmi-phy.yaml | 109 +++++ > .../bindings/phy/phy-mvebu-utmi.txt | 38 -- > .../arm64/boot/dts/marvell/armada-7040-db.dts | 14 +- > .../arm64/boot/dts/marvell/armada-8040-db.dts | 21 +- > .../boot/dts/marvell/armada-8040-mcbin.dtsi | 19 +- > arch/arm64/boot/dts/marvell/armada-cp11x.dtsi | 19 + > arch/arm64/boot/dts/marvell/cn9130-db.dts | 12 +- > arch/arm64/boot/dts/marvell/cn9131-db.dts | 9 +- > arch/arm64/boot/dts/marvell/cn9132-db.dts | 11 +- > drivers/phy/marvell/Kconfig | 8 + > drivers/phy/marvell/Makefile | 1 + > drivers/phy/marvell/phy-mvebu-cp110-utmi.c | 384 ++++++++++++++++++ > 13 files changed, 650 insertions(+), 52 deletions(-) > create mode 100644 Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml > create mode 100644 Documentation/devicetree/bindings/phy/marvell,armada-cp110-utmi-phy.yaml > delete mode 100644 Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt > create mode 100644 drivers/phy/marvell/phy-mvebu-cp110-utmi.c > > -- > 2.17.1 > -- Gregory Clement, Bootlin Embedded Linux and Kernel engineering http://bootlin.com
