Re: [PATCH v4 0/5] soundwire: add static port map support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 15-03-21, 16:56, Srinivas Kandagatla wrote:
> In some cases, SoundWire device ports are statically mapped to Controller
> ports during design, however there is no way to expose this information
> to the controller. Controllers like Qualcomm ones use this info to setup
> static bandwidth parameters for those ports.
> 
> A generic port allocation is not possible in this cases!
> This patch adds a new member m_port_map to SoundWire device so that
> it can populate the static master port map and share it with controller
> to be able to setup correct bandwidth parameters.
> 
> As a user of this feature this patchset also adds new bindings for
> wsa881x smart speaker which has 4 ports which are statically mapped
> to the 3 output and 1 input port of the controller.
> 
> Tested it on DB845c and SM8250 MTP.
> 
> thanks,
> srini
> 
> Changes since v3:
> 	- updated kernel doc for more clarity on m_port_map
> 
> Srinivas Kandagatla (5):
>   soundwire: add static port mapping support
>   soundwire: qcom: update port map allocation bit mask
>   soundwire: qcom: add static port map support

Applied all sdw patches, thanks

>   ASoC: dt-bindings: wsa881x: add bindings for port mapping
>   ASoC: codecs: wsa881x: add static port map support
> 
>  .../bindings/sound/qcom,wsa881x.yaml          |  9 ++++++
>  drivers/soundwire/qcom.c                      | 31 +++++++++++++++----
>  include/linux/soundwire/sdw.h                 |  2 ++
>  sound/soc/codecs/wsa881x.c                    |  7 +++++
>  4 files changed, 43 insertions(+), 6 deletions(-)
> 
> -- 
> 2.21.0

-- 
~Vinod



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux