Re: [PATCH] ARM: dts: aspeed: add ASRock E3C246D4I BMC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Mar 31, 2021 at 10:51:42PM CDT, Joel Stanley wrote:
Hi Zev,

On Thu, 1 Apr 2021 at 02:57, Zev Weiss <zev@xxxxxxxxxxxxxxxxx> wrote:

This is a relatively low-cost AST2500-based Xeon E-2100/E-2200 series
mini-ITX board that we hope can provide a decent platform for OpenBMC
development.

This initial device-tree provides the necessary configuration for
basic BMC functionality such as host power control, serial console and
KVM support, and POST code snooping.

The patch looks good! Some minor things below.

When sending subsequent versions, make sure to add -v N to your git
format-patch to mark it as the Nth version.

You've also set this to be threaded with a previous version of the
patch. We normally don't do that, and in this case it's doubly
confusing as you've split this patch out from the previous series.

I noticed you cc'd soc@xxxxxxxxxx. We normally only do this when we
want the soc maintainers to apply a patch directly without going
through another maintainer. In this case the patch should go through
the aspeed maintainer's tree (me), so you don't need to cc that
address.


Hmm, that came from using './scripts/get_maintainer.pl --no-rolestats' with git send-email's --cc-cmd flag; does there happen to be a similarly easy alternative that wouldn't do the "wrong" thing there?

Ack on the rest, will send v3 soon.


Thanks,
Zev

Signed-off-by: Zev Weiss <zev@xxxxxxxxxxxxxxxxx>
Reviewed-by: Joel Stanley <joel@xxxxxxxxx>
---

This spot just here is where you should put the changes between v1 and v2.

 arch/arm/boot/dts/Makefile                    |   1 +
 .../boot/dts/aspeed-bmc-asrock-e3c246d4i.dts  | 202 ++++++++++++++++++
 2 files changed, 203 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 8e5d4ab4e75e..b12911262ca1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1406,6 +1406,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
        aspeed-bmc-ampere-mtjade.dtb \
        aspeed-bmc-arm-centriq2400-rep.dtb \
        aspeed-bmc-arm-stardragon4800-rep2.dtb \
+       aspeed-bmc-asrock-e3c246d4i.dts \

This should be the output name (.dtb).

        aspeed-bmc-bytedance-g220a.dtb \
        aspeed-bmc-facebook-cmm.dtb \
        aspeed-bmc-facebook-galaxy100.dtb \
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
new file mode 100644
index 000000000000..dcab6e78dfa4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts

The device tree itself looks good!

If you fix up the things I mentioned and send a v3 I will apply it.

Cheers,

Joel

@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/{
+       model = "ASRock E3C246D4I BMC";
+       compatible = "asrock,e3c246d4i-bmc", "aspeed,ast2500";
+
+       aliases {
+               serial4 = &uart5;
+       };
+
+       chosen {
+               stdout-path = &uart5;
+               bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+       };
+
+       memory@80000000 {
+               reg = <0x80000000 0x20000000>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               heartbeat {
+                       /* BMC_HB_LED_N */
+                       gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "timer";
+               };
+
+               system-fault {
+                       /* SYSTEM_FAULT_LED_N */
+                       gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+                       panic-indicator;
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               uid-button {
+                       label = "uid-button";
+                       gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+                       linux,code = <ASPEED_GPIO(F, 1)>;
+               };
+       };
+
+       iio-hwmon {
+               compatible = "iio-hwmon";
+               io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+                       <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+                       <&adc 10>, <&adc 11>, <&adc 12>;
+       };
+};
+
+&fmc {
+       status = "okay";
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc";
+               spi-max-frequency = <100000000>; /* 100 MHz */
+#include "openbmc-flash-layout.dtsi"
+       };
+};
+
+&uart5 {
+       status = "okay";
+};
+
+&vuart {
+       status = "okay";
+       aspeed,sirq-active-high;
+};
+
+&mac0 {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c1 {
+       status = "okay";
+
+       /* thermal sensor, one diode run to a disconnected header */
+       w83773g@4c {
+               compatible = "nuvoton,w83773g";
+               reg = <0x4c>;
+       };
+};
+
+&i2c3 {
+       status = "okay";
+
+       /* FRU EEPROM */
+       eeprom@57 {
+               compatible = "st,24c128", "atmel,24c128";
+               reg = <0x57>;
+               pagesize = <16>;
+       };
+};
+
+&video {
+       status = "okay";
+};
+
+&vhub {
+       status = "okay";
+};
+
+&lpc_ctrl {
+       status = "okay";
+};
+
+&lpc_snoop {
+       status = "okay";
+       snoop-ports = <0x80>;
+};
+
+&gpio {
+       status = "okay";
+       gpio-line-names =
+               /*  A */ "BMC_MAC1_INTB", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+                       "", "", "", "",
+               /*  B */ "", "", "", "", "", "IRQ_BMC_PCH_SMI_LPC_N", "", "",
+               /*  C */ "", "", "", "", "", "", "", "",
+               /*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+                       "", "", "", "",
+               /*  E */ "", "", "", "", "", "", "", "",
+               /*  F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
+                       "", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
+               /*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+                       "BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "SML0ALERT",
+               /*  H */ "FM_ME_RCVR_N", "O_PWROK", "SKL_CNL_R", "D4_DIMM_EVENT_3V_N",
+                       "MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+               /*  I */ "", "", "", "", "", "", "", "",
+               /*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "",
+                       "", "", "", "",
+               /*  K */ "", "", "", "", "", "", "", "",
+               /*  L */ "BMC_CTS1", "BMC_DCD1", "BMC_DSR1", "BMC_RI1",
+                       "BMC_DTR1", "BMC_RTS1", "BMC_TXD1", "BMC_RXD1",
+               /*  M */ "BMC_LAN0_DIS_N", "BMC_LAN1_DIS_N", "", "",
+                       "", "", "", "",
+               /*  N */ "", "", "", "", "", "", "", "",
+               /*  O */ "", "", "", "", "", "", "", "",
+               /*  P */ "", "", "", "", "", "", "", "",
+               /*  Q */ "", "", "", "",
+                       "BMC_SBM_PRESENT_1_N", "BMC_SBM_PRESENT_2_N",
+                       "BMC_SBM_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+               /*  R */ "", "", "", "", "", "", "", "",
+               /*  S */ "PCHHOT_BMC_N", "", "RSMRST",
+                       "", "", "", "", "",
+               /*  T */ "", "", "", "", "", "", "", "",
+               /*  U */ "", "", "", "", "", "", "", "",
+               /*  V */ "", "", "", "", "", "", "", "",
+               /*  W */ "PS_PWROK", /* dummy always-high signal */
+                       "", "", "", "", "", "", "",
+               /*  X */ "", "", "", "", "", "", "", "",
+               /*  Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
+               /*  Z */ "CPU_CATERR_BMC_PCH_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+                       "", "", "", "",
+               /* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
+                       "", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
+               /* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY",
+                       "", "", "", "",
+               /* AC */ "LAD0", "LAD1", "LAD2", "LAD3",
+                       "CK_33M_BMC", "LFRAME", "SERIRQ", "S_PLTRST";
+
+       /* Assert BMC_READY so BIOS doesn't sit around waiting for it */
+       bmc-ready {
+               gpio-hog;
+               gpios = <ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+               output-high;
+       };
+};
+
+&adc {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_adc0_default
+                       &pinctrl_adc1_default
+                       &pinctrl_adc2_default
+                       &pinctrl_adc3_default
+                       &pinctrl_adc4_default
+                       &pinctrl_adc5_default
+                       &pinctrl_adc6_default
+                       &pinctrl_adc7_default
+                       &pinctrl_adc8_default
+                       &pinctrl_adc9_default
+                       &pinctrl_adc10_default
+                       &pinctrl_adc11_default
+                       &pinctrl_adc12_default>;
+};
+
+&kcs3 {
+       status = "okay";
+       aspeed,lpc-io-reg = <0xca2>;
+};
--
2.31.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux