[PATCH 1/4] iio: exyno-adc: use syscon for PMU register access

[Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>]

This patch updates the IIO based ADC driver to use syscon and regmap
APIs to access and use PMU registers instead of remapping the PMU
registers in the driver.

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@xxxxxxxxxxx>
To: linux-iio@xxxxxxxxxxxxxxx
---
 drivers/iio/adc/exynos_adc.c |   29 ++++++++++++++++++++---------
 1 file changed, 20 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index b63e882..60847ef 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -38,6 +38,8 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/machine.h>
 #include <linux/iio/driver.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 /* EXYNOS4412/5250 ADC_V1 registers definitions */
 #define ADC_V1_CON(x)		((x) + 0x00)
@@ -79,11 +81,14 @@
 
 #define EXYNOS_ADC_TIMEOUT	(msecs_to_jiffies(100))
 
+#define EXYNOS_ADCV1_PHY_OFFSET	0x0718
+#define EXYNOS_ADCV2_PHY_OFFSET	0x0720
+
 struct exynos_adc {
 	struct exynos_adc_data	*data;
 	struct device		*dev;
 	void __iomem		*regs;
-	void __iomem		*enable_reg;
+	struct regmap		*pmu_map;
 	struct clk		*clk;
 	struct clk		*sclk;
 	unsigned int		irq;
@@ -98,6 +103,7 @@ struct exynos_adc {
 struct exynos_adc_data {
 	int num_channels;
 	bool needs_sclk;
+	int phy_offset;
 
 	void (*init_hw)(struct exynos_adc *info);
 	void (*exit_hw)(struct exynos_adc *info);
@@ -169,7 +175,7 @@ static void exynos_adc_v1_init_hw(struct exynos_adc *info)
 {
 	u32 con1;
 
-	writel(1, info->enable_reg);
+	regmap_write(info->pmu_map, info->data->phy_offset, 1);
 
 	/* set default prescaler values and Enable prescaler */
 	con1 =  ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
@@ -183,7 +189,7 @@ static void exynos_adc_v1_exit_hw(struct exynos_adc *info)
 {
 	u32 con;
 
-	writel(0, info->enable_reg);
+	regmap_write(info->pmu_map, info->data->phy_offset, 0);
 
 	con = readl(ADC_V1_CON(info->regs));
 	con |= ADC_V1_CON_STANDBY;
@@ -208,6 +214,7 @@ static void exynos_adc_v1_start_conv(struct exynos_adc *info,
 
 static struct exynos_adc_data const exynos_adc_v1_data = {
 	.num_channels	= MAX_ADC_V1_CHANNELS,
+	.phy_offset	= EXYNOS_ADCV1_PHY_OFFSET,
 
 	.init_hw	= exynos_adc_v1_init_hw,
 	.exit_hw	= exynos_adc_v1_exit_hw,
@@ -219,7 +226,7 @@ static void exynos_adc_v2_init_hw(struct exynos_adc *info)
 {
 	u32 con1, con2;
 
-	writel(1, info->enable_reg);
+	regmap_write(info->pmu_map, info->data->phy_offset, 1);
 
 	con1 = ADC_V2_CON1_SOFT_RESET;
 	writel(con1, ADC_V2_CON1(info->regs));
@@ -236,7 +243,7 @@ static void exynos_adc_v2_exit_hw(struct exynos_adc *info)
 {
 	u32 con;
 
-	writel(0, info->enable_reg);
+	regmap_write(info->pmu_map, info->data->phy_offset, 0);
 
 	con = readl(ADC_V2_CON1(info->regs));
 	con &= ~ADC_CON_EN_START;
@@ -271,10 +278,12 @@ static void exynos_adc_v2_start_conv(struct exynos_adc *info,
 
 static struct exynos_adc_data const exynos_adc_v2_data = {
 	__EXYNOS_ADC_V2_DATA
+	.phy_offset = EXYNOS_ADCV2_PHY_OFFSET,
 };
 
 static struct exynos_adc_data const exynos3250_adc_v2_data = {
 	__EXYNOS_ADC_V2_DATA
+	.phy_offset = EXYNOS_ADCV1_PHY_OFFSET,
 	.needs_sclk = true,
 };
 
@@ -437,10 +446,12 @@ static int exynos_adc_probe(struct platform_device *pdev)
 	if (IS_ERR(info->regs))
 		return PTR_ERR(info->regs);
 
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	info->enable_reg = devm_ioremap_resource(&pdev->dev, mem);
-	if (IS_ERR(info->enable_reg))
-		return PTR_ERR(info->enable_reg);
+	info->pmu_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+					"samsung,syscon-phandle");
+	if (IS_ERR(info->pmu_map)) {
+		dev_err(&pdev->dev, "syscon regmap lookup failed.\n");
+		return PTR_ERR(info->pmu_map);
+	}
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html