On 2021-03-31 00:04, Steev Klimaszewski wrote:
On 3/22/21 4:17 AM, Kalyan Thota wrote:
From: Kalyan Thota <kalyant@xxxxxxxxxxxxxx>
DPU runtime resume will request for a min vote on the AXI bus as
it is a necessary step before turning ON the AXI clock.
The change does below
1) Move the icc path set before requesting runtime get_sync.
2) remove the dependency of hw catalog for min ib vote
as it is initialized at a later point.
Signed-off-by: Kalyan Thota <kalyan_t@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index ed636f1..cab387f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -44,6 +44,8 @@
#define DPU_DEBUGFS_DIR "msm_dpu"
#define DPU_DEBUGFS_HWMASKNAME "hw_log_mask"
+#define MIN_IB_BW 400000000ULL /* Min ib vote 400MB */
+
static int dpu_kms_hw_init(struct msm_kms *kms);
static void _dpu_kms_mmu_destroy(struct dpu_kms *dpu_kms);
@@ -932,6 +934,9 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
DPU_DEBUG("REG_DMA is not defined");
}
+ if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss"))
+ dpu_kms_parse_data_bus_icc_path(dpu_kms);
+
pm_runtime_get_sync(&dpu_kms->pdev->dev);
dpu_kms->core_rev = readl_relaxed(dpu_kms->mmio + 0x0);
@@ -1037,9 +1042,6 @@ static int dpu_kms_hw_init(struct msm_kms *kms)
dpu_vbif_init_memtypes(dpu_kms);
- if (of_device_is_compatible(dev->dev->of_node, "qcom,sc7180-mdss"))
- dpu_kms_parse_data_bus_icc_path(dpu_kms);
-
pm_runtime_put_sync(&dpu_kms->pdev->dev);
return 0;
@@ -1196,10 +1198,10 @@ static int __maybe_unused
dpu_runtime_resume(struct device *dev)
ddev = dpu_kms->dev;
+ WARN_ON(!(dpu_kms->num_paths));
/* Min vote of BW is required before turning on AXI clk */
for (i = 0; i < dpu_kms->num_paths; i++)
- icc_set_bw(dpu_kms->path[i], 0,
- dpu_kms->catalog->perf.min_dram_ib);
+ icc_set_bw(dpu_kms->path[i], 0, Bps_to_icc(MIN_IB_BW));
rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, true);
if (rc) {
With this patch now applied to 5.12-rc5, I am seeing the following when
booting the Lenovo Yoga C630 -
Mar 30 13:16:03 c630 kernel: [ 2.038491] ------------[ cut here
]------------
Mar 30 13:16:03 c630 kernel: [ 2.038495] WARNING: CPU: 3 PID: 125
at drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:1196
dpu_runtime_resume+0xc0/0xf0 [msm]
Mar 30 13:16:03 c630 kernel: [ 2.038551] Modules linked in:
ti_sn65dsi86 i2c_hid_of crct10dif_ce msm rtc_pm8xxx llcc_qcom ocmem
drm_kms_helper i2c_qcom_geni phy_qcom_qusb2 ipa(+) qcom_common
qcom_glink_smem qmi_helpers mdt_loader panel_simple drm pwm_bl
Mar 30 13:16:03 c630 kernel: [ 2.038599] CPU: 3 PID: 125 Comm:
kworker/3:1 Not tainted 5.12.0-rc5 #1
Mar 30 13:16:03 c630 kernel: [ 2.038605] Hardware name: LENOVO
81JL/LNVNB161216, BIOS 9UCN33WW(V2.06) 06/ 4/2019
Mar 30 13:16:03 c630 kernel: [ 2.038610] Workqueue: events
deferred_probe_work_func
Mar 30 13:16:03 c630 kernel: [ 2.038621] pstate: 60400005 (nZCv
daif +PAN -UAO -TCO BTYPE=--)
Mar 30 13:16:03 c630 kernel: [ 2.038627] pc :
dpu_runtime_resume+0xc0/0xf0 [msm]
Mar 30 13:16:03 c630 kernel: [ 2.038674] lr :
pm_generic_runtime_resume+0x30/0x50
Mar 30 13:16:03 c630 kernel: [ 2.038683] sp : ffff800010b9b7e0
Mar 30 13:16:03 c630 kernel: [ 2.038685] x29: ffff800010b9b7e0 x28:
0000000000000000
Mar 30 13:16:03 c630 kernel: [ 2.038692] x27: 0000000000000000 x26:
ffff6b42c0c16cf4
Mar 30 13:16:03 c630 kernel: [ 2.038698] x25: 000000007965f7df x24:
0000000000000001
Mar 30 13:16:03 c630 kernel: [ 2.038705] x23: ffff6b42c0a34180 x22:
ffffda2e0cc5b3d0
Mar 30 13:16:03 c630 kernel: [ 2.038712] x21: ffffda2e0b3ed6a0 x20:
ffff6b42c6845000
Mar 30 13:16:03 c630 kernel: [ 2.038718] x19: ffff6b42c6851080 x18:
ffffda2e0cce1220
Mar 30 13:16:03 c630 kernel: [ 2.038725] x17: ffffda2e0cce1238 x16:
ffffda2e0b23e5f0
Mar 30 13:16:03 c630 kernel: [ 2.038731] x15: 0000000040000000 x14:
0000000000000000
Mar 30 13:16:03 c630 kernel: [ 2.038738] x13: ffff6b42c5f0b5b0 x12:
0000000000000000
Mar 30 13:16:03 c630 kernel: [ 2.038744] x11: 0000000000000001 x10:
0000000000003fff
Mar 30 13:16:03 c630 kernel: [ 2.038750] x9 : 0000000000000000 x8 :
0000000000000000
Mar 30 13:16:03 c630 kernel: [ 2.038755] x7 : 0000000000000000 x6 :
000000000c473b7e
Mar 30 13:16:03 c630 kernel: [ 2.038761] x5 : 00ffffffffffffff x4 :
00221806fff8f800
Mar 30 13:16:03 c630 kernel: [ 2.038768] x3 : 0000000000000018 x2 :
ffffda2dc3d34320
Mar 30 13:16:03 c630 kernel: [ 2.038774] x1 : 0000000000000000 x0 :
0000000000000000
Mar 30 13:16:03 c630 kernel: [ 2.038781] Call trace:
Mar 30 13:16:03 c630 kernel: [ 2.038784]
dpu_runtime_resume+0xc0/0xf0 [msm]
Mar 30 13:16:03 c630 kernel: [ 2.038831]
pm_generic_runtime_resume+0x30/0x50
Mar 30 13:16:03 c630 kernel: [ 2.038836]
__genpd_runtime_resume+0x30/0xb0
Mar 30 13:16:03 c630 kernel: [ 2.038842]
genpd_runtime_resume+0x90/0x250
Mar 30 13:16:03 c630 kernel: [ 2.038848] __rpm_callback+0x90/0x160
Mar 30 13:16:03 c630 kernel: [ 2.038854] rpm_callback+0x24/0x84
Mar 30 13:16:03 c630 kernel: [ 2.038859] rpm_resume+0x450/0x6ec
Mar 30 13:16:03 c630 kernel: [ 2.038865]
__pm_runtime_resume+0x3c/0x90
Mar 30 13:16:03 c630 kernel: [ 2.038870]
dpu_kms_hw_init+0x124/0x5dc [msm]
Mar 30 13:16:03 c630 kernel: [ 2.038918] msm_drm_bind+0x468/0x594
[msm]
Mar 30 13:16:03 c630 kernel: [ 2.038965]
try_to_bring_up_master+0x164/0x1d0
Mar 30 13:16:03 c630 kernel: [ 2.038973]
component_master_add_with_match+0xb8/0x100
Mar 30 13:16:03 c630 kernel: [ 2.038979] msm_pdev_probe+0x260/0x300
[msm]
Mar 30 13:16:03 c630 kernel: [ 2.039026] platform_probe+0x68/0xe0
Mar 30 13:16:03 c630 kernel: [ 2.039032] really_probe+0xe4/0x4c0
Mar 30 13:16:03 c630 kernel: [ 2.039036]
driver_probe_device+0x58/0xc0
Mar 30 13:16:03 c630 kernel: [ 2.039040]
__device_attach_driver+0xa8/0x104
Mar 30 13:16:03 c630 kernel: [ 2.039045] bus_for_each_drv+0x78/0xd0
Mar 30 13:16:03 c630 kernel: [ 2.039051] __device_attach+0xd8/0x17c
Mar 30 13:16:03 c630 kernel: [ 2.039055]
device_initial_probe+0x14/0x20
Mar 30 13:16:03 c630 kernel: [ 2.039059] bus_probe_device+0x9c/0xa4
Mar 30 13:16:03 c630 kernel: [ 2.039065]
deferred_probe_work_func+0x74/0xb0
Mar 30 13:16:03 c630 kernel: [ 2.039069]
process_one_work+0x1d0/0x494
Mar 30 13:16:03 c630 kernel: [ 2.039076] worker_thread+0x13c/0x470
Mar 30 13:16:03 c630 kernel: [ 2.039080] kthread+0x158/0x160
Mar 30 13:16:03 c630 kernel: [ 2.039085] ret_from_fork+0x10/0x34
Mar 30 13:16:03 c630 kernel: [ 2.039093] ---[ end trace
65a4c9cc3f59c59a ]---
Mar 30 13:16:03 c630 kernel: [ 2.039124] [drm:dpu_kms_hw_init:943]
dpu hardware revision:0x40000000
Hi Steev,
The WARN_ON is true only for the device with compatible
"qcom,sc7180-mdss". For other devices its a
false alarm. Can you please try with the below change ?
https://patchwork.kernel.org/project/linux-arm-msm/patch/1617190020-7931-1-git-send-email-kalyan_t@xxxxxxxxxxxxxx/
Thanks,
Kalyan
_______________________________________________
Freedreno mailing list
Freedreno@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/freedreno
