Adapt at91_pm_backup_init() to work for SAMA7G5. Also, set the LPM pin to shutdown controller. This will signal to PMIC that it needs to switch to the state corresponding to backup mode. Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> --- arch/arm/mach-at91/pm.c | 3 ++- arch/arm/mach-at91/pm_suspend.S | 7 +++++++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 91b4014d2e10..fcb20272d65d 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -729,7 +729,8 @@ static int __init at91_pm_backup_init(void) struct platform_device *pdev; int ret = -ENODEV, located = 0; - if (!IS_ENABLED(CONFIG_SOC_SAMA5D2)) + if (!IS_ENABLED(CONFIG_SOC_SAMA5D2) && + !IS_ENABLED(CONFIG_SOC_SAMA7G5)) return -EPERM; if (!at91_is_pm_mode_active(AT91_PM_BACKUP)) diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index 7396e18dd7e5..cbd61a3bcab1 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -106,6 +106,12 @@ lp_done_\ena: #endif .endm + .macro at91_backup_set_lpm reg +#ifdef CONFIG_SOC_SAMA7 + orr \reg, \reg, #0x200000 +#endif + .endm + .text .arm @@ -989,6 +995,7 @@ ulp_exit: ldr r0, .shdwc mov tmp1, #0xA5000000 add tmp1, tmp1, #0x1 + at91_backup_set_lpm tmp1 str tmp1, [r0, #0] .endm -- 2.25.1
