On Thu, 10 Jul 2014, Peter Griffin wrote:
> This patch documents the device tree documentation required for
> the ST HCD controller found in STMicroelectronics SoCs.
>
> Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/usb/st-hcd.txt | 51 ++++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/st-hcd.txt
Just some nits:
> +Example:
> +
> +usb0: usb@fe100000 {
> + compatible = "st,usb-300x";
> + reg = <0xfe1ffc00 0x100>,
> + <0xfe1ffe00 0x100>;
> + reg-names = "ohci", "ehci";
> +
> + interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>,
> + <GIC_SPI 149 IRQ_TYPE_NONE>;
> + interrupt-names = "ehci","ohci";
s/","/", "
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usb0>;
> + clocks = <&clk_s_a1_ls CLK_ICN_IF_2>,
> + <&clockgen_b0 0>;
> + clock-names = "ic", "ohci";
> +
> + resets = <&powerdown STIH416_USB0_POWERDOWN>,
> + <&softreset STIH416_USB0_SOFTRESET>;
> + reset-names = "power", "softreset";
> +
> + phys = <&usb2_phy>;
> + phy-names = "usb2-phy";
Tabbing of the '='s not consistent.
> +};
> +
> +
Too many '\n' at EOF.
Nothing controversial here, so once this nits are rectified:
Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
