On Sun 28 Mar 15:52 CDT 2021, Dmitry Baryshkov wrote:
> In preparation to adding support for V4 DP PHY move DP functions to
> callbacks at struct qmp_phy_cfg.
>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Regards,
Bjorn
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp.c | 438 +++++++++++++++-------------
> 1 file changed, 231 insertions(+), 207 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 9cdebe7f26cb..4150096fd350 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -2268,6 +2268,8 @@ static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
> QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
> };
>
> +struct qmp_phy;
> +
> /* struct qmp_phy_cfg - per-PHY initialization config */
> struct qmp_phy_cfg {
> /* phy-type - PCIE/UFS/USB */
> @@ -2307,6 +2309,12 @@ struct qmp_phy_cfg {
> const struct qmp_phy_init_tbl *serdes_tbl_hbr3;
> int serdes_tbl_hbr3_num;
>
> + /* DP PHY callbacks */
> + int (*configure_dp_phy)(struct qmp_phy *qphy);
> + void (*configure_dp_tx)(struct qmp_phy *qphy);
> + int (*calibrate_dp_phy)(struct qmp_phy *qphy);
> + void (*dp_aux_init)(struct qmp_phy *qphy);
> +
> /* clock ids to be requested */
> const char * const *clk_list;
> int num_clks;
> @@ -2423,6 +2431,216 @@ struct qcom_qmp {
> struct reset_control *ufs_reset;
> };
>
> +static void qcom_qmp_v3_phy_dp_aux_init(struct qmp_phy *qphy)
> +{
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
> +
> + /* Turn on BIAS current for PHY/PLL */
> + writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
> + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
> + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
> +
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_LANE_0_1_PWRDN |
> + DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
> + DP_PHY_PD_CTL_DP_CLAMP_EN,
> + qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
> +
> + writel(QSERDES_V3_COM_BIAS_EN |
> + QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
> + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
> + QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
> + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> +
> + writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG0);
> + writel(0x13, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1);
> + writel(0x24, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2);
> + writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG3);
> + writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG4);
> + writel(0x26, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG5);
> + writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG6);
> + writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG7);
> + writel(0xbb, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG8);
> + writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG9);
> + qphy->dp_aux_cfg = 0;
> +
> + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> + PHY_AUX_REQ_ERR_MASK,
> + qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
> +}
> +
> +static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
> + { 0x00, 0x0c, 0x14, 0x19 },
> + { 0x00, 0x0b, 0x12, 0xff },
> + { 0x00, 0x0b, 0xff, 0xff },
> + { 0x04, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
> + { 0x08, 0x0f, 0x16, 0x1f },
> + { 0x11, 0x1e, 0x1f, 0xff },
> + { 0x19, 0x1f, 0xff, 0xff },
> + { 0x1f, 0xff, 0xff, 0xff }
> +};
> +
> +static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + unsigned int v_level = 0, p_level = 0;
> + u32 bias_en, drvr_en;
> + u8 voltage_swing_cfg, pre_emphasis_cfg;
> + int i;
> +
> + for (i = 0; i < dp_opts->lanes; i++) {
> + v_level = max(v_level, dp_opts->voltage[i]);
> + p_level = max(p_level, dp_opts->pre[i]);
> + }
> +
> + if (dp_opts->lanes == 1) {
> + bias_en = 0x3e;
> + drvr_en = 0x13;
> + } else {
> + bias_en = 0x3f;
> + drvr_en = 0x10;
> + }
> +
> + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> +
> + /* TODO: Move check to config check */
> + if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
> + return;
> +
> + /* Enable MUX to use Cursor values from these registers */
> + voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> + pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
> +
> + writel(voltage_swing_cfg, qphy->tx + QSERDES_V3_TX_TX_DRV_LVL);
> + writel(pre_emphasis_cfg, qphy->tx + QSERDES_V3_TX_TX_EMP_POST1_LVL);
> + writel(voltage_swing_cfg, qphy->tx2 + QSERDES_V3_TX_TX_DRV_LVL);
> + writel(pre_emphasis_cfg, qphy->tx2 + QSERDES_V3_TX_TX_EMP_POST1_LVL);
> +
> + writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> + writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> + writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> + writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> +}
> +
> +static int qcom_qmp_v3_phy_configure_dp_phy(struct qmp_phy *qphy)
> +{
> + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> + u32 val, phy_vco_div, status;
> + unsigned long pixel_freq;
> +
> + val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
> +
> + /*
> + * TODO: Assume orientation is CC1 for now and two lanes, need to
> + * use type-c connector to understand orientation and lanes.
> + *
> + * Otherwise val changes to be like below if this code understood
> + * the orientation of the type-c cable.
> + *
> + * if (lane_cnt == 4 || orientation == ORIENTATION_CC2)
> + * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN;
> + * if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
> + * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> + * if (orientation == ORIENTATION_CC2)
> + * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
> + */
> + val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> + writel(val, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
> +
> + writel(0x5c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
> + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
> + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + phy_vco_div = 0x1;
> + pixel_freq = 1620000000UL / 2;
> + break;
> + case 2700:
> + phy_vco_div = 0x1;
> + pixel_freq = 2700000000UL / 2;
> + break;
> + case 5400:
> + phy_vco_div = 0x2;
> + pixel_freq = 5400000000UL / 4;
> + break;
> + case 8100:
> + phy_vco_div = 0x0;
> + pixel_freq = 8100000000UL / 6;
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
> +
> + clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
> + clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
> +
> + writel(0x04, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2);
> + writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> + writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> + writel(0x09, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> +
> + writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
> +
> + if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000))
> + return -ETIMEDOUT;
> +
> + writel(0x18, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> + udelay(2000);
> + writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> +
> + return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000);
> +}
> +
> +/*
> + * We need to calibrate the aux setting here as many times
> + * as the caller tries
> + */
> +static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
> +{
> + static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
> + u8 val;
> +
> + qphy->dp_aux_cfg++;
> + qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
> + val = cfg1_settings[qphy->dp_aux_cfg];
> +
> + writel(val, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1);
> +
> + return 0;
> +}
> +
> static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
> {
> u32 reg;
> @@ -2871,6 +3089,11 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
>
> .has_phy_dp_com_ctrl = true,
> .is_dual_lane_phy = true,
> +
> + .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
> + .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
> + .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
> + .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
> };
>
> static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
> @@ -3332,227 +3555,28 @@ static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy)
> return 0;
> }
>
> -static void qcom_qmp_phy_dp_aux_init(struct qmp_phy *qphy)
> -{
> - writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> - DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
> - qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
> -
> - /* Turn on BIAS current for PHY/PLL */
> - writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX |
> - QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL,
> - qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> -
> - writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
> -
> - writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> - DP_PHY_PD_CTL_LANE_0_1_PWRDN |
> - DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN |
> - DP_PHY_PD_CTL_DP_CLAMP_EN,
> - qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
> -
> - writel(QSERDES_V3_COM_BIAS_EN |
> - QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN |
> - QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL |
> - QSERDES_V3_COM_CLKBUF_RX_DRIVE_L,
> - qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN);
> -
> - writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG0);
> - writel(0x13, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1);
> - writel(0x24, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2);
> - writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG3);
> - writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG4);
> - writel(0x26, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG5);
> - writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG6);
> - writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG7);
> - writel(0xbb, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG8);
> - writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG9);
> - qphy->dp_aux_cfg = 0;
> -
> - writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> - PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> - PHY_AUX_REQ_ERR_MASK,
> - qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
> -}
> -
> -static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
> - { 0x00, 0x0c, 0x14, 0x19 },
> - { 0x00, 0x0b, 0x12, 0xff },
> - { 0x00, 0x0b, 0xff, 0xff },
> - { 0x04, 0xff, 0xff, 0xff }
> -};
> -
> -static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
> - { 0x08, 0x0f, 0x16, 0x1f },
> - { 0x11, 0x1e, 0x1f, 0xff },
> - { 0x19, 0x1f, 0xff, 0xff },
> - { 0x1f, 0xff, 0xff, 0xff }
> -};
> -
> -static void qcom_qmp_phy_configure_dp_tx(struct qmp_phy *qphy)
> -{
> - const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> - unsigned int v_level = 0, p_level = 0;
> - u32 bias_en, drvr_en;
> - u8 voltage_swing_cfg, pre_emphasis_cfg;
> - int i;
> -
> - for (i = 0; i < dp_opts->lanes; i++) {
> - v_level = max(v_level, dp_opts->voltage[i]);
> - p_level = max(p_level, dp_opts->pre[i]);
> - }
> -
> - if (dp_opts->lanes == 1) {
> - bias_en = 0x3e;
> - drvr_en = 0x13;
> - } else {
> - bias_en = 0x3f;
> - drvr_en = 0x10;
> - }
> -
> - voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> - pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> -
> - /* TODO: Move check to config check */
> - if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
> - return;
> -
> - /* Enable MUX to use Cursor values from these registers */
> - voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> - pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
> -
> - writel(voltage_swing_cfg, qphy->tx + QSERDES_V3_TX_TX_DRV_LVL);
> - writel(pre_emphasis_cfg, qphy->tx + QSERDES_V3_TX_TX_EMP_POST1_LVL);
> - writel(voltage_swing_cfg, qphy->tx2 + QSERDES_V3_TX_TX_DRV_LVL);
> - writel(pre_emphasis_cfg, qphy->tx2 + QSERDES_V3_TX_TX_EMP_POST1_LVL);
> -
> - writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> - writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> - writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> - writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> -}
> -
> static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
> {
> const struct phy_configure_opts_dp *dp_opts = &opts->dp;
> struct qmp_phy *qphy = phy_get_drvdata(phy);
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
>
> memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts));
> if (qphy->dp_opts.set_voltages) {
> - qcom_qmp_phy_configure_dp_tx(qphy);
> + cfg->configure_dp_tx(qphy);
> qphy->dp_opts.set_voltages = 0;
> }
>
> return 0;
> }
>
> -static int qcom_qmp_phy_configure_dp_phy(struct qmp_phy *qphy)
> -{
> - const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
> - const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
> - u32 val, phy_vco_div, status;
> - unsigned long pixel_freq;
> -
> - val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> - DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
> -
> - /*
> - * TODO: Assume orientation is CC1 for now and two lanes, need to
> - * use type-c connector to understand orientation and lanes.
> - *
> - * Otherwise val changes to be like below if this code understood
> - * the orientation of the type-c cable.
> - *
> - * if (lane_cnt == 4 || orientation == ORIENTATION_CC2)
> - * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN;
> - * if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
> - * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> - * if (orientation == ORIENTATION_CC2)
> - * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
> - */
> - val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
> - writel(val, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL);
> -
> - writel(0x5c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
> - writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
> - writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
> -
> - switch (dp_opts->link_rate) {
> - case 1620:
> - phy_vco_div = 0x1;
> - pixel_freq = 1620000000UL / 2;
> - break;
> - case 2700:
> - phy_vco_div = 0x1;
> - pixel_freq = 2700000000UL / 2;
> - break;
> - case 5400:
> - phy_vco_div = 0x2;
> - pixel_freq = 5400000000UL / 4;
> - break;
> - case 8100:
> - phy_vco_div = 0x0;
> - pixel_freq = 8100000000UL / 6;
> - break;
> - default:
> - /* Other link rates aren't supported */
> - return -EINVAL;
> - }
> - writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV);
> -
> - clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
> - clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
> -
> - writel(0x04, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2);
> - writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> - writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> - writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> - writel(0x09, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> -
> - writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL);
> -
> - if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS,
> - status,
> - ((status & BIT(0)) > 0),
> - 500,
> - 10000))
> - return -ETIMEDOUT;
> -
> - writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> -
> - if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> - status,
> - ((status & BIT(1)) > 0),
> - 500,
> - 10000))
> - return -ETIMEDOUT;
> -
> - writel(0x18, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> - udelay(2000);
> - writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG);
> -
> - return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS,
> - status,
> - ((status & BIT(1)) > 0),
> - 500,
> - 10000);
> -}
> -
> -/*
> - * We need to calibrate the aux setting here as many times
> - * as the caller tries
> - */
> static int qcom_qmp_dp_phy_calibrate(struct phy *phy)
> {
> struct qmp_phy *qphy = phy_get_drvdata(phy);
> - static const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d };
> - u8 val;
> -
> - qphy->dp_aux_cfg++;
> - qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
> - val = cfg1_settings[qphy->dp_aux_cfg];
> + const struct qmp_phy_cfg *cfg = qphy->cfg;
>
> - writel(val, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1);
> + if (cfg->calibrate_dp_phy)
> + return cfg->calibrate_dp_phy(qphy);
>
> return 0;
> }
> @@ -3729,7 +3753,7 @@ static int qcom_qmp_phy_init(struct phy *phy)
> return ret;
>
> if (cfg->type == PHY_TYPE_DP)
> - qcom_qmp_phy_dp_aux_init(qphy);
> + cfg->dp_aux_init(qphy);
>
> return 0;
> }
> @@ -3783,7 +3807,7 @@ static int qcom_qmp_phy_power_on(struct phy *phy)
>
> /* Configure special DP tx tunings */
> if (cfg->type == PHY_TYPE_DP)
> - qcom_qmp_phy_configure_dp_tx(qphy);
> + cfg->configure_dp_tx(qphy);
>
> qcom_qmp_phy_configure_lane(rx, cfg->regs,
> cfg->rx_tbl, cfg->rx_tbl_num, 1);
> @@ -3802,7 +3826,7 @@ static int qcom_qmp_phy_power_on(struct phy *phy)
>
> /* Configure link rate, swing, etc. */
> if (cfg->type == PHY_TYPE_DP) {
> - qcom_qmp_phy_configure_dp_phy(qphy);
> + cfg->configure_dp_phy(qphy);
> } else {
> qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
> if (cfg->pcs_tbl_sec)
> --
> 2.30.2
>
