[PATCH v2 2/3] ARM: dts: imx6: pbab01: Set USB OTG port to peripheral

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Due to a hardware bug preventing the correct detection if the ID pin
the USB OTG port cannot be used in otg mode. It can either be set to
host or peripheral. Set it to peripheral so vbus is disabled by default.

Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
Reviewed-by: Fabio Estevam <festevam@xxxxxxxxx>
---
Changes in v2:
 - Added reviewed-by

 arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
index d434868e870a..b2f78b4362cb 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
@@ -164,6 +164,7 @@ &usbh1 {
 
 &usbotg {
 	status = "okay";
+	dr_mode = "peripheral";
 };
 
 &usdhc2 {
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux