From: Rafał Miłecki <rafal@xxxxxxxxxx>
Partitions are basically fixed indeed but firmware ones don't have
hardcoded function ("firmware" vs "failsafe"). Actual function depends
on bootloader configuration. Use a proper binding for that.
While at it fix numbers formatting to avoid:
arch/arm/boot/dts/bcm47094-linksys-panamera.dt.yaml: partitions: 'partition@1F00000' does not match any of the regexes: '^partition@[0-9a-f]+$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/mtd/partitions/linksys,ns-partitions.yaml
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 1dc0cb0fae22..8b77efd2224e 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -279,7 +279,7 @@ &usb3_phy {
&nandcs {
partitions {
- compatible = "fixed-partitions";
+ compatible = "linksys,ns-partitions";
#address-cells = <1>;
#size-cells = <1>;
@@ -300,20 +300,18 @@ partition@180000{
};
partition@200000 {
- label = "firmware";
- reg = <0x0200000 0x01D00000>;
- compatible = "brcm,trx";
+ reg = <0x0200000 0x01d00000>;
+ compatible = "linksys,ns-firmware", "brcm,trx";
};
- partition@1F00000 {
- label = "failsafe";
- reg = <0x01F00000 0x01D00000>;
- read-only;
+ partition@1f00000 {
+ reg = <0x01f00000 0x01d00000>;
+ compatible = "linksys,ns-firmware", "brcm,trx";
};
partition@5200000 {
label = "system";
- reg = <0x05200000 0x02E00000>;
+ reg = <0x05200000 0x02e00000>;
};
};
};
--
2.26.2
