Add node for Samsung S5K5BAF CMOS image sensor and
enable the associated MIPI CSI-2 receiver node.
Signed-off-by: Timon Baetz <timon.baetz@xxxxxxxxxxxxxx>
---
v2: Rename node from s5k5bafx to image-sensor and use GPIO_ACTIVE_LOW
arch/arm/boot/dts/exynos4210-i9100.dts | 52 ++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index 228de6d8c9d1..f47b6eaf208f 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -147,6 +147,36 @@ battery@36 {
};
};
+ i2c_s5k5baf: i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sda-gpios = <&gpc1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpc1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>;
+
+ image-sensor@2d {
+ compatible = "samsung,s5k5baf";
+ reg = <0x2d>;
+ vdda-supply = <&cam_io_en_reg>;
+ vddreg-supply = <&vt_core_15v_reg>;
+ vddio-supply = <&vtcam_reg>;
+ clocks = <&camera 0>;
+ clock-names = "mclk";
+ stbyn-gpios = <&gpl2 0 GPIO_ACTIVE_LOW>;
+ rstn-gpios = <&gpl2 1 GPIO_ACTIVE_LOW>;
+ clock-frequency = <24000000>;
+
+ port {
+ s5k5bafx_ep: endpoint {
+ remote-endpoint = <&csis1_ep>;
+ data-lanes = <1>;
+ };
+ };
+ };
+ };
+
spi-3 {
compatible = "spi-gpio";
#address-cells = <1>;
@@ -220,7 +250,11 @@ pmic_ap_clk: pmic-ap-clk {
};
&camera {
+ pinctrl-0 = <&cam_port_a_clk_active>;
+ pinctrl-names = "default";
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_CAM0>, <&clock CLK_MOUT_CAM1>;
+ assigned-clock-parents = <&clock CLK_XUSBXTI>, <&clock CLK_XUSBXTI>;
};
&cpu0 {
@@ -794,3 +828,21 @@ &serial_3 {
&tmu {
status = "okay";
};
+
+&csis_1 {
+ status = "okay";
+ vddcore-supply = <&vusb_reg>;
+ vddio-supply = <&vmipi_reg>;
+ clock-frequency = <160000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@4 {
+ reg = <4>;
+ csis1_ep: endpoint {
+ remote-endpoint = <&s5k5bafx_ep>;
+ data-lanes = <1>;
+ samsung,csis-hs-settle = <6>;
+ };
+ };
+};
--
2.25.1
