On 26/03/2021 17:25, Timon Baetz wrote:
> Add node for Samsung S5K5BAF CMOS image sensor and
> enable the associated MIPI CSI-2 receiver node.
>
> Signed-off-by: Timon Baetz <timon.baetz@xxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/exynos4210-i9100.dts | 52 ++++++++++++++++++++++++++
> 1 file changed, 52 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
> index 228de6d8c9d1..d31146c08b84 100644
> --- a/arch/arm/boot/dts/exynos4210-i9100.dts
> +++ b/arch/arm/boot/dts/exynos4210-i9100.dts
> @@ -147,6 +147,36 @@ battery@36 {
> };
> };
>
> + i2c_s5k5baf: i2c-gpio-1 {
> + compatible = "i2c-gpio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + sda-gpios = <&gpc1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> + scl-gpios = <&gpc1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> + i2c-gpio,delay-us = <2>;
> +
> + s5k5bafx@2d {
The node name should be generic, so "image-sensor".
> + compatible = "samsung,s5k5baf";
> + reg = <0x2d>;
> + vdda-supply = <&cam_io_en_reg>;
> + vddreg-supply = <&vt_core_15v_reg>;
> + vddio-supply = <&vtcam_reg>;
> + clocks = <&camera 0>;
> + clock-names = "mclk";
> + stbyn-gpios = <&gpl2 0 1>;
GPIO_ACTIVE_LOW
> + rstn-gpios = <&gpl2 1 1>;
> + clock-frequency = <24000000>;
> +
Best regards,
Krzysztof
