Hi Elaine, You've changed the license ones again. Could someone advise about GPL2.0 and legal stuff here? On 3/26/21 11:30 AM, Elaine Zhang wrote: > Convert the soc/rockchip/power_domain.txt binding document to > json-schema and move to the power bindings directory. > > Signed-off-by: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx> > From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> Is this the correct position for that? > Link:https://patchwork.kernel.org/project/linux-rockchip/patch/20210225102643.653095-1-enric.balletbo@xxxxxxxxxxxxx/ Normally the original author of a patch should be honored with help of this command below: git commit --amend --author="Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>" This places a "From: ...." on top of the commit message. But this is still a conversion/restyle to YAML. Meanwhile various other authors in the past have made contributions/comments to this document as well that was GPL2.0 only at the time. (I'm just saying: Claiming to be the only author sounds a bit strange here) Johan > --- > .../power/rockchip,power-controller.yaml | 291 ++++++++++++++++++ > .../bindings/soc/rockchip/power_domain.txt | 136 -------- > 2 files changed, 291 insertions(+), 136 deletions(-) > create mode 100644 Documentation/devicetree/bindings/power/rockchip,power-controller.yaml > delete mode 100644 Documentation/devicetree/bindings/soc/rockchip/power_domain.txt > > diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml > new file mode 100644 > index 000000000000..9fec9e227432 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml > @@ -0,0 +1,291 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause This is a conversion of an excising document. When distributing derived works, the source code of the work must be made available under the same license. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/power/rockchip,power-controller.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Rockchip Power Domains > + > +maintainers: > + - Elaine Zhang <zhangqing@xxxxxxxxxxxxxx> > + - Heiko Stuebner <heiko@xxxxxxxxx> > + > +description: | > + Rockchip processors include support for multiple power domains which can be > + powered up/down by software based on different application scenarios to save power. > + > + Power domains contained within power-controller node are generic power domain > + providers documented in Documentation/devicetree/bindings/power/power-domain.yaml. > + > + IP cores belonging to a power domain should contain a "power-domains" > + property that is a phandle for the power domain node representing the domain. > + > +properties: > + $nodename: > + const: power-controller > + > + compatible: > + enum: > + - rockchip,px30-power-controller > + - rockchip,rk3036-power-controller > + - rockchip,rk3066-power-controller > + - rockchip,rk3128-power-controller > + - rockchip,rk3188-power-controller > + - rockchip,rk3228-power-controller > + - rockchip,rk3288-power-controller > + - rockchip,rk3328-power-controller > + - rockchip,rk3366-power-controller > + - rockchip,rk3368-power-controller > + - rockchip,rk3399-power-controller > + > + "#power-domain-cells": > + const: 1 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + clocks: true > + > + assigned-clocks: > + minItems: 1 > + > + assigned-clock-parents: > + minItems: 1 > + > +patternProperties: > + "^power-domain@[0-9a-f]+$": > + type: object > + description: | > + Represents the power domains within the power controller node as documented > + in Documentation/devicetree/bindings/power/power-domain.yaml. > + > + properties: > + > + "#power-domain-cells": > + description: > + Must be 0 for nodes representing a single PM domain and 1 for nodes > + providing multiple PM domains. > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + reg: > + maxItems: 1 > + description: | > + Power domain index. Valid values are defined in > + "include/dt-bindings/power/px30-power.h" > + "include/dt-bindings/power/rk3036-power.h" > + "include/dt-bindings/power/rk3066-power.h" > + "include/dt-bindings/power/rk3128-power.h" > + "include/dt-bindings/power/rk3188-power.h" > + "include/dt-bindings/power/rk3228-power.h" > + "include/dt-bindings/power/rk3288-power.h" > + "include/dt-bindings/power/rk3328-power.h" > + "include/dt-bindings/power/rk3366-power.h" > + "include/dt-bindings/power/rk3368-power.h" > + "include/dt-bindings/power/rk3399-power.h" > + > + clocks: > + description: | > + A number of phandles to clocks that need to be enabled while power domain > + switches state. > + > + pm_qos: > + description: | > + A number of phandles to qos blocks which need to be saved and restored > + while power domain switches state. > + > + patternProperties: > + "^power-domain@[0-9a-f]+$": > + type: object > + description: | > + Represents a power domain child within a power domain parent node. > + > + properties: > + > + "#power-domain-cells": > + description: > + Must be 0 for nodes representing a single PM domain and 1 for nodes > + providing multiple PM domains. > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + reg: > + maxItems: 1 > + > + clocks: > + description: | > + A number of phandles to clocks that need to be enabled while power domain > + switches state. > + > + pm_qos: > + description: | > + A number of phandles to qos blocks which need to be saved and restored > + while power domain switches state. > + > + patternProperties: > + "^power-domain@[0-9a-f]+$": > + type: object > + description: | > + Represents a power domain child within a power domain parent node. > + > + properties: > + > + "#power-domain-cells": > + description: > + Must be 0 for nodes representing a single PM domain and 1 for nodes > + providing multiple PM domains. > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + reg: > + maxItems: 1 > + > + clocks: > + description: | > + A number of phandles to clocks that need to be enabled while power domain > + switches state. > + > + pm_qos: > + description: | > + A number of phandles to qos blocks which need to be saved and restored > + while power domain switches state. > + > + required: > + - reg > + > + additionalProperties: false > + > + required: > + - reg > + > + additionalProperties: false > + > + required: > + - reg > + > + additionalProperties: false > + > +required: > + - compatible > + - "#power-domain-cells" > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/rk3399-cru.h> > + #include <dt-bindings/power/rk3399-power.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + qos_hdcp: qos@ffa90000 { > + compatible = "rockchip,rk3399-qos", "syscon"; > + reg = <0x0 0xffa90000 0x0 0x20>; > + }; > + > + qos_iep: qos@ffa98000 { > + compatible = "rockchip,rk3399-qos", "syscon"; > + reg = <0x0 0xffa98000 0x0 0x20>; > + }; > + > + qos_rga_r: qos@ffab0000 { > + compatible = "rockchip,rk3399-qos", "syscon"; > + reg = <0x0 0xffab0000 0x0 0x20>; > + }; > + > + qos_rga_w: qos@ffab0080 { > + compatible = "rockchip,rk3399-qos", "syscon"; > + reg = <0x0 0xffab0080 0x0 0x20>; > + }; > + > + qos_video_m0: qos@ffab8000 { > + compatible = "rockchip,rk3399-qos", "syscon"; > + reg = <0x0 0xffab8000 0x0 0x20>; > + }; > + > + qos_video_m1_r: qos@ffac0000 { > + compatible = "rockchip,rk3399-qos", "syscon"; > + reg = <0x0 0xffac0000 0x0 0x20>; > + }; > + > + qos_video_m1_w: qos@ffac0080 { > + compatible = "rockchip,rk3399-qos", "syscon"; > + reg = <0x0 0xffac0080 0x0 0x20>; > + }; > + > + power-management@ff310000 { > + compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd"; > + reg = <0x0 0xff310000 0x0 0x1000>; > + > + power-controller { > + compatible = "rockchip,rk3399-power-controller"; > + #power-domain-cells = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* These power domains are grouped by VD_CENTER */ > + power-domain@RK3399_PD_IEP { > + reg = <RK3399_PD_IEP>; > + clocks = <&cru ACLK_IEP>, > + <&cru HCLK_IEP>; > + pm_qos = <&qos_iep>; > + #power-domain-cells = <0>; > + }; > + power-domain@RK3399_PD_RGA { > + reg = <RK3399_PD_RGA>; > + clocks = <&cru ACLK_RGA>, > + <&cru HCLK_RGA>; > + pm_qos = <&qos_rga_r>, > + <&qos_rga_w>; > + #power-domain-cells = <0>; > + }; > + power-domain@RK3399_PD_VCODEC { > + reg = <RK3399_PD_VCODEC>; > + clocks = <&cru ACLK_VCODEC>, > + <&cru HCLK_VCODEC>; > + pm_qos = <&qos_video_m0>; > + #power-domain-cells = <0>; > + }; > + power-domain@RK3399_PD_VDU { > + reg = <RK3399_PD_VDU>; > + clocks = <&cru ACLK_VDU>, > + <&cru HCLK_VDU>; > + pm_qos = <&qos_video_m1_r>, > + <&qos_video_m1_w>; > + #power-domain-cells = <0>; > + }; > + power-domain@RK3399_PD_VIO { > + reg = <RK3399_PD_VIO>; > + #power-domain-cells = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + power-domain@RK3399_PD_HDCP { > + reg = <RK3399_PD_HDCP>; > + clocks = <&cru ACLK_HDCP>, > + <&cru HCLK_HDCP>, > + <&cru PCLK_HDCP>; > + pm_qos = <&qos_hdcp>; > + #power-domain-cells = <0>; > + }; > + }; > + }; > + }; > + }; > diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt > deleted file mode 100644 > index 8304eceb62e4..000000000000 > --- a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt > +++ /dev/null > @@ -1,136 +0,0 @@ > -* Rockchip Power Domains > - > -Rockchip processors include support for multiple power domains which can be > -powered up/down by software based on different application scenes to save power. > - > -Required properties for power domain controller: > -- compatible: Should be one of the following. > - "rockchip,px30-power-controller" - for PX30 SoCs. > - "rockchip,rk3036-power-controller" - for RK3036 SoCs. > - "rockchip,rk3066-power-controller" - for RK3066 SoCs. > - "rockchip,rk3128-power-controller" - for RK3128 SoCs. > - "rockchip,rk3188-power-controller" - for RK3188 SoCs. > - "rockchip,rk3228-power-controller" - for RK3228 SoCs. > - "rockchip,rk3288-power-controller" - for RK3288 SoCs. > - "rockchip,rk3328-power-controller" - for RK3328 SoCs. > - "rockchip,rk3366-power-controller" - for RK3366 SoCs. > - "rockchip,rk3368-power-controller" - for RK3368 SoCs. > - "rockchip,rk3399-power-controller" - for RK3399 SoCs. > -- #power-domain-cells: Number of cells in a power-domain specifier. > - Should be 1 for multiple PM domains. > -- #address-cells: Should be 1. > -- #size-cells: Should be 0. > - > -Required properties for power domain sub nodes: > -- reg: index of the power domain, should use macros in: > - "include/dt-bindings/power/px30-power.h" - for PX30 type power domain. > - "include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain. > - "include/dt-bindings/power/rk3066-power.h" - for RK3066 type power domain. > - "include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain. > - "include/dt-bindings/power/rk3188-power.h" - for RK3188 type power domain. > - "include/dt-bindings/power/rk3228-power.h" - for RK3228 type power domain. > - "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain. > - "include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain. > - "include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain. > - "include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain. > - "include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain. > -- clocks (optional): phandles to clocks which need to be enabled while power domain > - switches state. > -- pm_qos (optional): phandles to qos blocks which need to be saved and restored > - while power domain switches state. > - > -Qos Example: > - > - qos_gpu: qos_gpu@ffaf0000 { > - compatible ="syscon"; > - reg = <0x0 0xffaf0000 0x0 0x20>; > - }; > - > -Example: > - > - power: power-controller { > - compatible = "rockchip,rk3288-power-controller"; > - #power-domain-cells = <1>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - pd_gpu { > - reg = <RK3288_PD_GPU>; > - clocks = <&cru ACLK_GPU>; > - pm_qos = <&qos_gpu>; > - }; > - }; > - > - power: power-controller { > - compatible = "rockchip,rk3368-power-controller"; > - #power-domain-cells = <1>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - pd_gpu_1 { > - reg = <RK3368_PD_GPU_1>; > - clocks = <&cru ACLK_GPU_CFG>; > - }; > - }; > - > -Example 2: > - power: power-controller { > - compatible = "rockchip,rk3399-power-controller"; > - #power-domain-cells = <1>; > - #address-cells = <1>; > - #size-cells = <0>; > - > - pd_vio { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <RK3399_PD_VIO>; > - > - pd_vo { > - #address-cells = <1>; > - #size-cells = <0>; > - reg = <RK3399_PD_VO>; > - > - pd_vopb { > - reg = <RK3399_PD_VOPB>; > - }; > - > - pd_vopl { > - reg = <RK3399_PD_VOPL>; > - }; > - }; > - }; > - }; > - > -Node of a device using power domains must have a power-domains property, > -containing a phandle to the power device node and an index specifying which > -power domain to use. > -The index should use macros in: > - "include/dt-bindings/power/px30-power.h" - for px30 type power domain. > - "include/dt-bindings/power/rk3036-power.h" - for rk3036 type power domain. > - "include/dt-bindings/power/rk3128-power.h" - for rk3128 type power domain. > - "include/dt-bindings/power/rk3128-power.h" - for rk3228 type power domain. > - "include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain. > - "include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain. > - "include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain. > - "include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain. > - "include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain. > - > -Example of the node using power domain: > - > - node { > - /* ... */ > - power-domains = <&power RK3288_PD_GPU>; > - /* ... */ > - }; > - > - node { > - /* ... */ > - power-domains = <&power RK3368_PD_GPU_1>; > - /* ... */ > - }; > - > - node { > - /* ... */ > - power-domains = <&power RK3399_PD_VOPB>; > - /* ... */ > - }; >
