Currently the spi_mem_op to read from the flash is used in two places:
spi_nor_create_read_dirmap() and spi_nor_spimem_read_data(). In a later
commit this number will increase to three. Instead of repeating the
same
code thrice, add a function that returns a template of the read op. The
callers can then fill in the details like address, data length, data
buffer location.
Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx>
---
drivers/mtd/spi-nor/core.c | 62 ++++++++++++++++++++------------------
1 file changed, 32 insertions(+), 30 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 4a315cb1c4db..88888df009f0 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -183,6 +183,33 @@ static int spi_nor_controller_ops_erase(struct
spi_nor *nor, loff_t offs)
return nor->controller_ops->erase(nor, offs);
}
+/**
+ * spi_nor_spimem_get_read_op() - return a template for the spi_mem_op
used for
+ * reading data from the flash via
spi-mem.
+ * @nor: pointer to 'struct spi_nor'
+ *
+ * Return: A template of the 'struct spi_mem_op' for used for reading
data from
+ * the flash. The caller is expected to fill in the address, data
length, and
+ * the data buffer.
+ */
+static struct spi_mem_op spi_nor_spimem_get_read_op(struct spi_nor
*nor)
+{
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 0),
+ SPI_MEM_OP_ADDR(nor->addr_width, 0, 0),
+ SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
+ SPI_MEM_OP_DATA_IN(1, NULL, 0));
+
+ spi_nor_spimem_setup_op(nor, &op, nor->read_proto);
+
+ /* convert the dummy cycles to the number of bytes */
+ op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;
+ if (spi_nor_protocol_is_dtr(nor->read_proto))
+ op.dummy.nbytes *= 2;
+
+ return op;
+}
+
/**
* spi_nor_spimem_read_data() - read data from flash's memory region
via
* spi-mem
@@ -196,21 +223,14 @@ static int spi_nor_controller_ops_erase(struct
spi_nor *nor, loff_t offs)
static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t
from,
size_t len, u8 *buf)
{
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 0),
- SPI_MEM_OP_ADDR(nor->addr_width, from, 0),
- SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
- SPI_MEM_OP_DATA_IN(len, buf, 0));
+ struct spi_mem_op op = spi_nor_spimem_get_read_op(nor);
bool usebouncebuf;
ssize_t nbytes;
int error;
- spi_nor_spimem_setup_op(nor, &op, nor->read_proto);
-
- /* convert the dummy cycles to the number of bytes */
- op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;
- if (spi_nor_protocol_is_dtr(nor->read_proto))
- op.dummy.nbytes *= 2;
+ op.addr.val = from;
+ op.data.nbytes = len;
+ op.data.buf.in = buf;
usebouncebuf = spi_nor_spimem_bounce(nor, &op);
@@ -3581,28 +3601,10 @@ EXPORT_SYMBOL_GPL(spi_nor_scan);
static int spi_nor_create_read_dirmap(struct spi_nor *nor)
{
struct spi_mem_dirmap_info info = {
- .op_tmpl = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 0),
- SPI_MEM_OP_ADDR(nor->addr_width, 0, 0),
- SPI_MEM_OP_DUMMY(nor->read_dummy, 0),
- SPI_MEM_OP_DATA_IN(0, NULL, 0)),
+ .op_tmpl = spi_nor_spimem_get_read_op(nor),
.offset = 0,
.length = nor->mtd.size,
};
- struct spi_mem_op *op = &info.op_tmpl;
-
- spi_nor_spimem_setup_op(nor, op, nor->read_proto);
-
- /* convert the dummy cycles to the number of bytes */
- op->dummy.nbytes = (nor->read_dummy * op->dummy.buswidth) / 8;
- if (spi_nor_protocol_is_dtr(nor->read_proto))
- op->dummy.nbytes *= 2;
-
- /*
- * Since spi_nor_spimem_setup_op() only sets buswidth when the number
- * of data bytes is non-zero, the data buswidth won't be set here.
So,
- * do it explicitly.
- */
- op->data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto);
