Re: [PATCH 06/17] auxdisplay: Extract character line display core support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-03-22 15:48, Geert Uytterhoeven wrote:
Extract the character line display core support from the simple ASCII
LCD driver for the MIPS Boston, Malta & SEAD3 development boards into
its own subdriver, so it can be reused for other displays.

Note that this moves the "message" device attribute in sysfs in a
"linedisp.N" subdirectory.

Signed-off-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
---
Changes to img-ascii-lcd.c are untested due to lack of hardware.
---
 drivers/auxdisplay/Kconfig         |   8 +
 drivers/auxdisplay/Makefile        |   1 +
 drivers/auxdisplay/img-ascii-lcd.c | 198 +++----------------------
 drivers/auxdisplay/line-display.c  | 231 +++++++++++++++++++++++++++++
 drivers/auxdisplay/line-display.h  |  43 ++++++
 5 files changed, 304 insertions(+), 177 deletions(-)
 create mode 100644 drivers/auxdisplay/line-display.c
 create mode 100644 drivers/auxdisplay/line-display.h

diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index 1509cb74705a30ad..42fc7b155de09dbc 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -25,6 +25,12 @@ config CHARLCD
 	  This is some character LCD core interface that multiple drivers can
 	  use.

+config LINEDISP
+	tristate "Character line display core support" if COMPILE_TEST
+	help
+	  This is the core support for single-line character displays, to be
+	  selected by drivers that use it.
+
 config HD44780_COMMON
 	tristate "Common functions for HD44780 (and compatibles) LCD
displays" if COMPILE_TEST
 	select CHARLCD
@@ -155,6 +161,7 @@ config IMG_ASCII_LCD
 	depends on HAS_IOMEM
 	default y if MIPS_MALTA
 	select MFD_SYSCON
+	select LINEDISP
 	help
 	  Enable this to support the simple ASCII LCD displays found on
 	  development boards such as the MIPS Boston, MIPS Malta & MIPS SEAD3
@@ -169,6 +176,7 @@ config HT16K33
 	select FB_SYS_IMAGEBLIT
 	select INPUT_MATRIXKMAP
 	select FB_BACKLIGHT
+	select LINEDISP

At this point in your patch stack it's not used by the ht16k33 driver. I think it would be nicer to add this dependency when the code actually starts depending on it. So that when this patch stack gets applied partially or not in one go the chunks
would be independent.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux