Add support ip-sleep wakeup for MT8183, it's similar to MT8173,
and it's also a specific one, but not following IPM rule.
Due to the index 2 already used by many DTS, it's better to keep
it unchanged for backward compatibility, treat specific ones without
following IPM rule as revision 1.x, meanwhile reserve 3~10 for later
revision that follows the IPM rule.
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
v2:
1. fix typo suggested by Sergei
2. fix build warning - Woverflow
3. modify revision format
---
drivers/usb/mtu3/mtu3_host.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
index c871b94f3e6f..398ce0014606 100644
--- a/drivers/usb/mtu3/mtu3_host.c
+++ b/drivers/usb/mtu3/mtu3_host.c
@@ -24,6 +24,12 @@
#define WC1_IS_EN BIT(25)
#define WC1_IS_P BIT(6) /* polarity for ip sleep */
+/* mt8183 */
+#define PERI_WK_CTRL0 0x0
+#define WC0_IS_C(x) ((u32)(((x) & 0xf) << 28)) /* cycle debounce */
+#define WC0_IS_P BIT(12) /* polarity */
+#define WC0_IS_EN BIT(6)
+
/* mt2712 etc */
#define PERI_SSUSB_SPM_CTRL 0x0
#define SSC_IP_SLEEP_EN BIT(4)
@@ -32,6 +38,7 @@
enum ssusb_uwk_vers {
SSUSB_UWK_V1 = 1,
SSUSB_UWK_V2,
+ SSUSB_UWK_V1_1 = 101, /* specific revision 1.01 */
};
/*
@@ -48,6 +55,11 @@ static void ssusb_wakeup_ip_sleep_set(struct ssusb_mtk *ssusb, bool enable)
msk = WC1_IS_EN | WC1_IS_C(0xf) | WC1_IS_P;
val = enable ? (WC1_IS_EN | WC1_IS_C(0x8)) : 0;
break;
+ case SSUSB_UWK_V1_1:
+ reg = ssusb->uwk_reg_base + PERI_WK_CTRL0;
+ msk = WC0_IS_EN | WC0_IS_C(0xf) | WC0_IS_P;
+ val = enable ? (WC0_IS_EN | WC0_IS_C(0x8)) : 0;
+ break;
case SSUSB_UWK_V2:
reg = ssusb->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;
--
2.18.0
