[PATCH v2 04/13] usb: xhci-mtk: fix broken streams issue on 0.96 xHCI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The MediaTek 0.96 xHCI controller on some platforms does not
support bulk stream even HCCPARAMS says supporting, due to MaxPSASize
is set a default value 1 by mistake, here use XHCI_BROKEN_STREAMS
quirk to fix it.

Fixes: 94a631d91ad3 ("usb: xhci-mtk: check hcc_params after adding primary hcd")
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
v2: no changes
---
 drivers/usb/host/xhci-mtk.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 57bcfdfa0465..1b9f10048fe0 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -388,6 +388,13 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci)
 	xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
 	if (mtk->lpm_support)
 		xhci->quirks |= XHCI_LPM_SUPPORT;
+
+	/*
+	 * MTK xHCI 0.96: PSA is 1 by default even if doesn't support stream,
+	 * and it's 3 when support it.
+	 */
+	if (xhci->hci_version < 0x100 && HCC_MAX_PSA(xhci->hcc_params) == 4)
+		xhci->quirks |= XHCI_BROKEN_STREAMS;
 }
 
 /* called during probe() after chip reset completes */
@@ -549,7 +556,8 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 	if (ret)
 		goto put_usb3_hcd;
 
-	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+	if (HCC_MAX_PSA(xhci->hcc_params) >= 4 &&
+	    !(xhci->quirks & XHCI_BROKEN_STREAMS))
 		xhci->shared_hcd->can_do_streams = 1;
 
 	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
-- 
2.18.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux