On Sat, 20 Mar 2021, min.li.xe@xxxxxxxxxxx wrote: > From: Min Li <min.li.xe@xxxxxxxxxxx> > > Add support for ClockMatrix(TM) and 82P33xxx families of timing > and synchronization devices. The access interface can be either > SPI or I2C. Currently, it will create 2 types of MFD devices, > which are to be used by the corresponding rsmu character device > driver and the PTP hardware clock driver, respectively. > > Signed-off-by: Min Li <min.li.xe@xxxxxxxxxxx> > --- > drivers/mfd/Kconfig | 27 ++ > drivers/mfd/Makefile | 2 + > drivers/mfd/rsmu_i2c.c | 344 +++++++++++++++++ > drivers/mfd/rsmu_private.h | 32 ++ > drivers/mfd/rsmu_spi.c | 371 ++++++++++++++++++ > include/linux/mfd/idt82p33_reg.h | 102 +++++ > include/linux/mfd/idt8a340_reg.h | 817 +++++++++++++++++++++++++++++++++++++++ > include/linux/mfd/rsmu.h | 42 ++ > 8 files changed, 1737 insertions(+) > create mode 100644 drivers/mfd/rsmu_i2c.c > create mode 100644 drivers/mfd/rsmu_private.h > create mode 100644 drivers/mfd/rsmu_spi.c > create mode 100644 include/linux/mfd/idt82p33_reg.h > create mode 100644 include/linux/mfd/idt8a340_reg.h > create mode 100644 include/linux/mfd/rsmu.h I'm pretty confused. This has been sent ~6 times already. What is the v1 of? Is this a different driver? If so, why does it have the same $SUBJECT line? If this is not actually v1. Please provide a change-log. > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 49bb445..1202301 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -1196,6 +1196,33 @@ config MFD_STW481X > endmenu > endif -- Lee Jones [李琼斯] Senior Technical Lead - Developer Services Linaro.org │ Open source software for Arm SoCs Follow Linaro: Facebook | Twitter | Blog
