On 09:14-20210319, Aswath Govindraju wrote: > The following speed modes are now supported in J7200 SoC, > - HS200 and HS400 modes at 1.8 V card voltage, in MMCSD0 subsystem [1]. > - UHS-I speed modes in MMCSD1 subsystem [1]. > > Add support for UHS-I modes by adding voltage regulator device tree nodes > and corresponding pinmux details, to power cycle and voltage switch cards. > Set respective tags in sdhci0 and remove no-1-8-v tag from sdhci1 > device tree nodes. > > Also update the delay values for various speed modes supported, based on > the revised january 2021 J7200 datasheet[2]. > > [1] - section 12.3.6.1.1 MMCSD Features, in > https://www.ti.com/lit/ug/spruiu1a/spruiu1a.pdf, > (SPRUIU1A – JULY 2020 – REVISED JANUARY 2021) > > [2] - https://www.ti.com/lit/ds/symlink/dra821u.pdf, > (SPRSP57B – APRIL 2020 – REVISED JANUARY 2021) > > Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx> > --- [...] > + > + vdd_sd_dv_pins_default: vdd_sd_dv_pins_default { Nope. Use: vdd_sd_dv_pins_default: vdd-sd-dv-pins-default -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
