Re: [PATCH v3 0/9] Armada8k enable per-port SATA interrupts and drop a hack in the IRQ subsystem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Marcin,

> [Resend in plain text]
>
> Hi,
>
> Just letting everyone know - merging only the DT part of this patchset
> broke AHCI on all Marvell Armada 7k8k / CN913x platforms in v5.11
> release.

It's unfortunate that we didn't know this when v5.11-rc1 was
released. However it is still time for a fix, I will submit it.
As I explained in the other email when I applied this I really though
that the driver part will be applied, I don't know what happened here.

Grégory

>
> FYI, I'm currently updating the device trees in EDK2 based on the
> v5.11 DT sources - I'm going to keep the previous binding anyway, as
> the new one breaks booting with AHCI not only for older Linux
> versions, but also for other OSs (yet another argument to use ACPI).
>
> Best regards,
> Marcin
>
>
> sob., 27 lut 2021 o 12:02 Sven Auhagen <sven.auhagen@xxxxxxxxxxxx> napisał(a):
>>
>> Hello,
>>
>> can I ask about the status of this patch?
>> As far as I can tell it was not merged to ata and I did not receive
>> any further feedback that there was a problem with the patch series.
>>
>> As a matter of fact the device tree part was already merged by
>> Gregory Clement.
>>
>> Best and thanks
>> Sven
>>
>> On Mon, Nov 09, 2020 at 06:39:39PM +0100, sven.auhagen@xxxxxxxxxxxx wrote:
>> > From: Sven Auhagen <sven.auhagen@xxxxxxxxxxxx>
>> >
>> > Hello,
>> >
>> > There were already 4 versions of this series from Miquèl.
>> > I talked to Miquèl and I fixed up the last comments from v4.
>> > I am looking for feedback if this patch series is now ready to be merged
>> > and what should be further changed.
>> >
>> > Here is the original cover letter:
>> >
>> > Some time ago, when the initial support for Armada CP110 was
>> > contributed, the SATA core was not able to handle per-port
>> > interrupts. Despite the hardware reality, the device tree only
>> > represents one main interrupt for the two ports. Having both SATA
>> > ports enabled at the same time has been achieved by a hack in the ICU
>> > driver(1) that faked the use of the two interrupts, no matter which
>> > SATA port was in use.
>> >
>> > Now that the SATA core is ready to handle more than one interrupt,
>> > this series adds support for it in the libahci_platform code. The
>> > CP110 device tree must be updated to reflect the two SATA ports
>> > available and their respective interrupts. To do not break DT backward
>> > compatibility, the ahci_platform driver now embeds a special quirk
>> > which checks if the DT is valid (only for A8k compatible) and, if
>> > needed, creates the two missing sub-nodes, and assign them the
>> > relevant "reg" and "interrupts" properties, before removing the main
>> > SATA node "interrupts" one.
>> >
>> > (1) The ICU is an irqchip aggregating the CP110 (south-bridge)
>> > interrupts into MSIs for the AP806 (north-bridge).
>> >
>> > Best
>> > Sven
>> >
>> > Change from v2:
>> >   * Fix commit message of custom irq init for host init
>> >
>> > Change from v1:
>> >   * Add a patch to enable custom irq initialization in
>> >     plattform init host
>> >   * Add multi_irq_host_ack callback for the msi irq handler
>> >   * Rework the ahci mvebu patch to initiate the irq and use
>> >     the new multi_irq_host_ack to handle the custom irq code.
>> >     Remove the custom irq handler and duplicate code.
>> >   * Fix the armada8k backwards compatibility code
>> >   * Rename AHCI_PLATFORM_A8K_QUIRK to AHCI_PLATFORM_ARMADA8K_QUIRK
>> >
>> > Miquel Raynal (5):
>> >   ata: ahci: mvebu: Rename a platform data flag
>> >   ata: ahci: mvebu: Support A8k compatible
>> >   irqchip/irq-mvebu-icu: Remove the double SATA ports interrupt hack
>> >   dt-bindings: ata: Update ahci bindings with possible per-port
>> >     interrupts
>> >   dt-bindings: ata: Update ahci_mvebu bindings
>> >
>> > Sven Auhagen (4):
>> >   ata: libahci_platform: Do not try to get an IRQ when
>> >     AHCI_HFLAG_MULTI_MSI is set
>> >   ata: ahci: add ack callback to multi irq handler
>> >   ata: ahci: mvebu: Add support for A8k legacy DT bindings
>> >   arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts
>> >
>> >  .../devicetree/bindings/ata/ahci-platform.txt |   7 +
>> >  arch/arm64/boot/dts/marvell/armada-cp11x.dtsi |   6 +-
>> >  drivers/ata/ahci.h                            |   2 +
>> >  drivers/ata/ahci_mvebu.c                      | 143 ++++++++++++++++--
>> >  drivers/ata/libahci.c                         |   4 +
>> >  drivers/ata/libahci_platform.c                |  19 ++-
>> >  drivers/irqchip/irq-mvebu-icu.c               |  18 ---
>> >  include/linux/ahci_platform.h                 |   1 +
>> >  8 files changed, 160 insertions(+), 40 deletions(-)
>> >
>> > --
>> > 2.20.1
>> >
>> >
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux