Hi Rex-BC Chen,
Thank you for your patch.
Missatge de Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx> del dia dj., 18 de
març 2021 a les 6:42:
>
> Add per-platform max clock rate check in mtk_dpi_bridge_mode_valid.
>
> Signed-off-by: Pi-Hsun Shih <pihsun@xxxxxxxxxxxx>
> Signed-off-by: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx>
> Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index b05f900d9322..0b427ad0cd9b 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -120,6 +120,7 @@ struct mtk_dpi_yc_limit {
> struct mtk_dpi_conf {
> unsigned int (*cal_factor)(int clock);
> u32 reg_h_fre_con;
> + u32 max_clock_khz;
> bool edge_sel_en;
> };
>
> @@ -557,9 +558,23 @@ static void mtk_dpi_bridge_enable(struct drm_bridge *bridge)
> mtk_dpi_set_display_mode(dpi, &dpi->mode);
> }
>
> +static enum drm_mode_status
> +mtk_dpi_bridge_mode_valid(struct drm_bridge *bridge,
> + const struct drm_display_info *info,
> + const struct drm_display_mode *mode)
> +{
> + struct mtk_dpi *dpi = bridge_to_dpi(bridge);
> +
> + if (dpi->conf->max_clock_khz && mode->clock > dpi->conf->max_clock_khz)
Maybe I read this patch too fast, but why the &&? Shouldn't be more
simple and readable
if (mode->clock > max_clock)
Thanks,
Enric
> + return MODE_CLOCK_HIGH;
> +
> + return MODE_OK;
> +}
> +
> static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
> .attach = mtk_dpi_bridge_attach,
> .mode_set = mtk_dpi_bridge_mode_set,
> + .mode_valid = mtk_dpi_bridge_mode_valid,
> .disable = mtk_dpi_bridge_disable,
> .enable = mtk_dpi_bridge_enable,
> };
> @@ -668,17 +683,20 @@ static unsigned int mt8183_calculate_factor(int clock)
> static const struct mtk_dpi_conf mt8173_conf = {
> .cal_factor = mt8173_calculate_factor,
> .reg_h_fre_con = 0xe0,
> + .max_clock_khz = 300000,
> };
>
> static const struct mtk_dpi_conf mt2701_conf = {
> .cal_factor = mt2701_calculate_factor,
> .reg_h_fre_con = 0xb0,
> .edge_sel_en = true,
> + .max_clock_khz = 150000,
> };
>
> static const struct mtk_dpi_conf mt8183_conf = {
> .cal_factor = mt8183_calculate_factor,
> .reg_h_fre_con = 0xe0,
> + .max_clock_khz = 100000,
> };
>
> static int mtk_dpi_probe(struct platform_device *pdev)
> --
> 2.18.0
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
