Convert the binding to DT schema format. Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx> --- .../bindings/power/supply/lltc,ltc294x.yaml | 66 +++++++++++++++++++ .../bindings/power/supply/ltc2941.txt | 28 -------- 2 files changed, 66 insertions(+), 28 deletions(-) create mode 100644 Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml delete mode 100644 Documentation/devicetree/bindings/power/supply/ltc2941.txt diff --git a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml new file mode 100644 index 000000000000..043bf378040f --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/power/supply/lltc,ltc294x.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: Binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery fuel gauges + +description: | + All chips measure battery capacity. + The LTC2942 is pin compatible with the LTC2941, it adds voltage and + temperature monitoring, and is runtime detected. LTC2943 and LTC2944 + are software compatible, uses a slightly different conversion formula + for the charge counter and adds voltage, current and temperature monitoring. + +maintainers: + - Sebastian Reichel <sre@xxxxxxxxxx> + +allOf: + - $ref: power-supply.yaml# + +properties: + compatible: + enum: + - lltc,ltc2941 + - lltc,ltc2942 + - lltc,ltc2943 + - lltc,ltc2944 + + reg: + maxItems: 1 + + lltc,resistor-sense: + $ref: /schemas/types.yaml#/definitions/int32 + description: | + Sense resistor value in milli-ohms. + Can be negative value when the battery has been connected to the wrong end of the resistor. + + lltc,prescaler-exponent: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The prescaler exponent as explained in the datasheet. + This determines the range and accuracy of the gauge. + The value is programmed into the chip only if it differs from the current setting. + The setting is lost when the battery is disconnected. + +required: + - compatible + - reg + - lltc,resistor-sense + - lltc,prescaler-exponent + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + battery@64 { + compatible = "lltc,ltc2943"; + reg = <0x64>; + lltc,resistor-sense = <15>; + lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */ + }; + }; diff --git a/Documentation/devicetree/bindings/power/supply/ltc2941.txt b/Documentation/devicetree/bindings/power/supply/ltc2941.txt deleted file mode 100644 index 3b9ba147b041..000000000000 --- a/Documentation/devicetree/bindings/power/supply/ltc2941.txt +++ /dev/null @@ -1,28 +0,0 @@ -binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery gauges - -All chips measure battery capacity. -The LTC2942 is pin compatible with the LTC2941, it adds voltage and -temperature monitoring, and is runtime detected. LTC2943 and LTC2944 -is software compatible, uses a slightly different conversion formula -for the charge counter and adds voltage, current and temperature monitoring. - -Required properties: -- compatible: Should contain "lltc,ltc2941", "lltc,ltc2942", "lltc,ltc2943" - or "lltc,ltc2944" which also indicates the type of I2C chip attached. -- reg: The 7-bit I2C address. -- lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit - negative value when the battery has been connected to the wrong end of the - resistor. -- lltc,prescaler-exponent: The prescaler exponent as explained in the datasheet. - This determines the range and accuracy of the gauge. The value is programmed - into the chip only if it differs from the current setting. The setting is - lost when the battery is disconnected. - -Example from the Topic Miami Florida board: - - fuelgauge: ltc2943@64 { - compatible = "lltc,ltc2943"; - reg = <0x64>; - lltc,resistor-sense = <15>; - lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */ - }; -- 2.30.2
