This patch allows to create PHYs from DT in case
if they are explicitly defined. The of_mdiobus_register() is
used for such purposes.
For backward compatibility, call of_mdiobus_register() only in case
if at least one PHY's child is defined in DT, otherwise rollback to
mdiobus_register().
Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
---
drivers/net/ethernet/ti/davinci_mdio.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
index 735dc53..22d3dab 100644
--- a/drivers/net/ethernet/ti/davinci_mdio.c
+++ b/drivers/net/ethernet/ti/davinci_mdio.c
@@ -38,6 +38,7 @@
#include <linux/davinci_emac.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_mdio.h>
#include <linux/pinctrl/consumer.h>
/*
@@ -95,6 +96,7 @@ struct davinci_mdio_data {
struct mii_bus *bus;
bool suspended;
unsigned long access_time; /* jiffies */
+ bool skip_scan;
};
static void __davinci_mdio_reset(struct davinci_mdio_data *data)
@@ -144,6 +146,9 @@ static int davinci_mdio_reset(struct mii_bus *bus)
dev_info(data->dev, "davinci mdio revision %d.%d\n",
(ver >> 8) & 0xff, ver & 0xff);
+ if (data->skip_scan)
+ return 0;
+
/* get phy mask from the alive register */
phy_mask = __raw_readl(&data->regs->alive);
if (phy_mask) {
@@ -369,8 +374,17 @@ static int davinci_mdio_probe(struct platform_device *pdev)
goto bail_out;
}
- /* register the mii bus */
- ret = mdiobus_register(data->bus);
+ /* register the mii bus
+ * Create PHYs from DT only in case if PHY child nodes are explicitly
+ * defined to support backward compatibility with DTs which assume that
+ * Davinci MDIO will always scan the bus for PHYs detection.
+ */
+ if (dev->of_node && of_get_child_count(dev->of_node)) {
+ data->skip_scan = true;
+ ret = of_mdiobus_register(data->bus, dev->of_node);
+ } else {
+ ret = mdiobus_register(data->bus);
+ }
if (ret)
goto bail_out;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
