On Tue, Mar 09, 2021 at 01:13:11PM +0100, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@xxxxxxxxxx>
>
> USB bindings already allow specifying USB device hard wired to a
> specific controller port but they don't allow describing port on its
> own.
>
> This fixes:
> arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dt.yaml: usb@23000: port@1: 'compatible' is a required property
> From schema: Documentation/devicetree/bindings/usb/generic-xhci.yaml
>
> Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
> ---
> Please check if I got the $nodename part right. Somehow I don't see any
> errors / warnings when using:
>
> something@1 {
> reg = <1>;
> };
$nodename may not work in child nodes of a schema.
> ---
> .../devicetree/bindings/usb/usb-hcd.yaml | 4 +-
> .../devicetree/bindings/usb/usb-port.yaml | 39 +++++++++++++++++++
> 2 files changed, 42 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/usb/usb-port.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> index 56853c17af66..b0c6a79cad57 100644
> --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
> @@ -33,7 +33,9 @@ patternProperties:
> "^.*@[0-9a-f]{1,2}$":
> description: The hard wired USB devices
> type: object
> - $ref: /usb/usb-device.yaml
> + oneOf:
> + - $ref: /usb/usb-port.yaml
> + - $ref: /usb/usb-device.yaml
>
> additionalProperties: true
>
> diff --git a/Documentation/devicetree/bindings/usb/usb-port.yaml b/Documentation/devicetree/bindings/usb/usb-port.yaml
> new file mode 100644
> index 000000000000..68fe16c8703e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/usb-port.yaml
> @@ -0,0 +1,39 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/usb-port.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: USB port on USB controller
> +
> +maintainers:
> + - Rafał Miłecki <rafal@xxxxxxxxxx>
> +
> +description: |
> + This binding describes a single USB controller port that doesn't have any
> + device hard wired.
> +
> +properties:
> + $nodename:
> + pattern: "^port@[0-9a-f]{1,2}$"
Unfortunately, 'port' is used elsewhere, so this would be applied
any node that matches. That's not really a problem as this is simple
enough, but then what does it buy us?
I'd be fine just dropping 'compatible' as required in usb-device.yaml.
> +
> + reg:
> + description: number of USB controller port
> + maxItems: 1
> +
> +required:
> + - reg
> +
> +additionalProperties: true
> +
> +examples:
> + - |
> + usb@11270000 {
> + reg = <0x11270000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@1 {
> + reg = <1>;
> + };
> + };
> --
> 2.26.2
>
