Re: [PATCH v7 21/22] dt-bindings: add BCM6318 GPIO sysctl binding documentation

[Rob Herring <robh+dt@xxxxxxxxxx>]

On Mon, Mar 15, 2021 at 5:42 AM Álvaro Fernández Rojas
<noltari@xxxxxxxxx> wrote:
>
> Add binding documentation for the GPIO sysctl found in BCM6318 SoCs.
>
> Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx>
> ---
>  v7: add changes suggested by Rob Herring
>
>  .../mfd/brcm,bcm6318-gpio-sysctl.yaml         | 179 ++++++++++++++++++
>  1 file changed, 179 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
> new file mode 100644
> index 000000000000..7056a490a27d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml
> @@ -0,0 +1,179 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/brcm,bcm6318-gpio-sysctl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom BCM6318 GPIO System Controller Device Tree Bindings
> +
> +maintainers:
> +  - Álvaro Fernández Rojas <noltari@xxxxxxxxx>
> +  - Jonas Gorski <jonas.gorski@xxxxxxxxx>
> +
> +description:
> +  Broadcom BCM6318 SoC GPIO system controller which provides a register map
> +  for controlling the GPIO and pins of the SoC.

Perhaps a blurb about other registers in this block. From the
registers, it looked like LED and PHY control at least.

> +
> +properties:
> +  "#address-cells": true
> +
> +  "#size-cells": true
> +
> +  compatible:
> +    items:
> +      - const: brcm,bcm6318-gpio-sysctl
> +      - const: syscon
> +      - const: simple-mfd
> +
> +  ranges:
> +    maxItems: 1
> +
> +  reg:
> +    maxItems: 1
> +
> +patternProperties:
> +  "^gpio@[0-9a-f]+$":
> +    # Child node
> +    type: object
> +    $ref: "../gpio/brcm,bcm63xx-gpio.yaml"
> +    description:
> +      GPIO controller for the SoC GPIOs. This child node definition
> +      should follow the bindings specified in
> +      Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml.
> +
> +  "^pinctrl@[0-9a-f]+$":
> +    # Child node
> +    type: object
> +    $ref: "../pinctrl/brcm,bcm6318-pinctrl.yaml"
> +    description:
> +      Pin controller for the SoC pins. This child node definition
> +      should follow the bindings specified in
> +      Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml.
> +
> +required:
> +  - "#address-cells"
> +  - compatible
> +  - ranges
> +  - reg
> +  - "#size-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    syscon@10000080 {
> +      #address-cells = <1>;
> +      #size-cells = <1>;
> +      compatible = "brcm,bcm6318-gpio-sysctl", "syscon", "simple-mfd";
> +      reg = <0x10000080 0x80>;
> +      ranges = <0 0x10000080 0x80>;
> +
> +      gpio@0 {
> +        compatible = "brcm,bcm6318-gpio";
> +        reg = <0x0 0x10>;
> +
> +        data = <0xc>;
> +        dirout = <0x4>;
> +
> +        gpio-controller;
> +        gpio-ranges = <&pinctrl 0 0 50>;
> +        #gpio-cells = <2>;
> +      };
> +
> +      pinctrl: pinctrl@10 {
> +        compatible = "brcm,bcm6318-pinctrl";
> +        reg = <0x18 0x10>, <0x54 0x18>;
> +
> +        pinctrl_ephy0_spd_led: ephy0_spd_led-pins {
> +          function = "ephy0_spd_led";
> +          pins = "gpio0";
> +        };
> +
> +        pinctrl_ephy1_spd_led: ephy1_spd_led-pins {
> +          function = "ephy1_spd_led";
> +          pins = "gpio1";
> +        };
> +
> +        pinctrl_ephy2_spd_led: ephy2_spd_led-pins {
> +          function = "ephy2_spd_led";
> +          pins = "gpio2";
> +        };
> +
> +        pinctrl_ephy3_spd_led: ephy3_spd_led-pins {
> +          function = "ephy3_spd_led";
> +          pins = "gpio3";
> +        };
> +
> +        pinctrl_ephy0_act_led: ephy0_act_led-pins {
> +          function = "ephy0_act_led";
> +          pins = "gpio4";
> +        };
> +
> +        pinctrl_ephy1_act_led: ephy1_act_led-pins {
> +          function = "ephy1_act_led";
> +          pins = "gpio5";
> +        };
> +
> +        pinctrl_ephy2_act_led: ephy2_act_led-pins {
> +          function = "ephy2_act_led";
> +          pins = "gpio6";
> +        };
> +
> +        pinctrl_ephy3_act_led: ephy3_act_led-pins {
> +          function = "ephy3_act_led";
> +          pins = "gpio7";
> +        };
> +
> +        pinctrl_serial_led: serial_led-pins {
> +          pinctrl_serial_led_data: serial_led_data-pins {
> +            function = "serial_led_data";
> +            pins = "gpio6";
> +          };
> +
> +          pinctrl_serial_led_clk: serial_led_clk-pins {
> +            function = "serial_led_clk";
> +            pins = "gpio7";
> +          };
> +        };
> +
> +        pinctrl_inet_act_led: inet_act_led-pins {
> +          function = "inet_act_led";
> +          pins = "gpio8";
> +        };
> +
> +        pinctrl_inet_fail_led: inet_fail_led-pins {
> +          function = "inet_fail_led";
> +          pins = "gpio9";
> +        };
> +
> +        pinctrl_dsl_led: dsl_led-pins {
> +          function = "dsl_led";
> +          pins = "gpio10";
> +        };
> +
> +        pinctrl_post_fail_led: post_fail_led-pins {
> +          function = "post_fail_led";
> +          pins = "gpio11";
> +        };
> +
> +        pinctrl_wlan_wps_led: wlan_wps_led-pins {
> +          function = "wlan_wps_led";
> +          pins = "gpio12";
> +        };
> +
> +        pinctrl_usb_pwron: usb_pwron-pins {
> +          function = "usb_pwron";
> +          pins = "gpio13";
> +        };
> +
> +        pinctrl_usb_device_led: usb_device_led-pins {
> +          function = "usb_device_led";
> +          pins = "gpio13";
> +        };
> +
> +        pinctrl_usb_active: usb_active-pins {
> +          function = "usb_active";
> +          pins = "gpio40";
> +        };
> +      };
> +    };
> --
> 2.20.1
>