On Tue, 16 Mar 2021 01:35:53 +0800, Hsin-Hsiung Wang wrote: > add dt-binding document for MediaTek MT6359 PMIC > > Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@xxxxxxxxxxxx> > --- > changes since v5: > - no change. > --- > .../bindings/regulator/mt6359-regulator.yaml | 169 ++++++++++++++++++ > 1 file changed, 169 insertions(+) > create mode 100644 Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dt.yaml: pmic: 'adc', 'compatible' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.example.dt.yaml: pmic: '#address-cells', '#size-cells', 'adc' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/sprd,sc2720-adc.example.dt.yaml: pmic: '#address-cells', '#size-cells', 'adc@480' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/qcom,pm8018-adc.example.dt.yaml: pmic: '#address-cells', '#size-cells', 'adc@197' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml See https://patchwork.ozlabs.org/patch/1453404 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
