Hi, On Mon, Mar 15, 2021 at 6:15 PM Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote: > > CoachZ rev3 uses a 100k NTC thermistor for the charger temperatures, > instead of the 47k NTC that is stuffed in earlier revisions. Add .dts > files for rev3. > > The 47k NTC currently isn't supported by the PM6150 ADC driver. > Disable the charger thermal zone for rev1 and rev2 to avoid the use > of bogus temperature values. > > This also gets rid of the explicit DT files for rev2 and handles > rev2 in the rev1 .dts instead. There was some back and forth > downstream involving the 'dmic_clk_en' pin, after that was sorted > out the DT for rev1 and rev2 is the same. > > Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx> > --- > > Changes in v3: > - get rid of separate .dts for rev2 > > Changes in v2: > - added CoachZ rev3 > - updated subject and commit message > > arch/arm64/boot/dts/qcom/Makefile | 4 ++-- > .../boot/dts/qcom/sc7180-trogdor-coachz-r1-lte.dts | 4 ++-- > .../boot/dts/qcom/sc7180-trogdor-coachz-r1.dts | 13 +++++++++++-- > ...-r2-lte.dts => sc7180-trogdor-coachz-r3-lte.dts} | 6 +++--- > ...r-coachz-r2.dts => sc7180-trogdor-coachz-r3.dts} | 4 ++-- > 5 files changed, 20 insertions(+), 11 deletions(-) Looks keen to me now, thanks! Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
