Add a binding description for Realtek's GPIO controller found on several of their MIPS-based SoCs (codenamed Otto), such as the RTL838x and RTL839x series of switch SoCs. A fallback binding 'realtek,otto-gpio' is provided for cases where the actual port ordering is not known yet, and enabling the interrupt controller may result in uncaught interrupts. Signed-off-by: Sander Vanheule <sander@xxxxxxxxxxxxx> --- .../bindings/gpio/gpio-realtek-otto.yaml | 80 +++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-realtek-otto.yaml diff --git a/Documentation/devicetree/bindings/gpio/gpio-realtek-otto.yaml b/Documentation/devicetree/bindings/gpio/gpio-realtek-otto.yaml new file mode 100644 index 000000000000..3e8151e3a169 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-realtek-otto.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-realtek-otto.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek Otto GPIO controller + +maintainers: + - Sander Vanheule <sander@xxxxxxxxxxxxx> + - Bert Vermeulen <bert@xxxxxxxx> + +description: | + Realtek's GPIO controller on their MIPS switch SoCs (Otto platform) consists + of two banks of 32 GPIOs. These GPIOs can generate edge-triggered interrupts. + Each bank's interrupts are cascased into one interrupt line on the parent + interrupt controller, if provided. + This binding allows defining a single bank in the devicetree. The interrupt + controller is not supported on the fallback compatible name, which only + allows for GPIO port use. + +properties: + $nodename: + pattern: "^gpio@[0-9a-f]+$" + + compatible: + oneOf: + - items: + - enum: + - realtek,rtl8380-gpio + - realtek,rtl8390-gpio + - const: realtek,otto-gpio + - const: realtek,otto-gpio + + reg: + maxItems: 1 + + "#gpio-cells": + const: 2 + + gpio-controller: true + + ngpios: + minimum: 1 + maximum: 32 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - "#gpio-cells" + - gpio-controller + +additionalProperties: false + +dependencies: + interrupt-controller: [ interrupts ] + +examples: + - | + gpio@3500 { + compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio"; + reg = <0x3500 0x1c>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <24>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&rtlintc>; + interrupts = <23>; + }; + +... -- 2.30.2