Add DTB boot support, only support Loongson-2K1000 processor
for now, determine whether to use the built-in DTB or the DTB
from the firmware by checking the range of CKSEG0 and XKPHYS.
loongson_fw_interface will be used in the future.
Signed-off-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
Signed-off-by: Qing Zhang <zhangqing@xxxxxxxxxxx>
Tested-by: Ming Wang <wangming01@xxxxxxxxxxx>
---
v4-v5:
- Remake the patch based on the latest changes
arch/mips/include/asm/mach-loongson64/loongson.h | 9 ++++++++-
arch/mips/loongson64/env.c | 13 ++++++++++++-
arch/mips/loongson64/init.c | 16 ++++++++++++++--
3 files changed, 34 insertions(+), 4 deletions(-)
diff --git a/arch/mips/include/asm/mach-loongson64/loongson.h b/arch/mips/include/asm/mach-loongson64/loongson.h
index 6189deb188cf..f7c3ab6d724e 100644
--- a/arch/mips/include/asm/mach-loongson64/loongson.h
+++ b/arch/mips/include/asm/mach-loongson64/loongson.h
@@ -12,8 +12,14 @@
#include <linux/irq.h>
#include <boot_param.h>
+enum loongson_fw_interface {
+ LOONGSON_LEFI,
+ LOONGSON_DTB,
+};
+
/* machine-specific boot configuration */
struct loongson_system_configuration {
+ enum loongson_fw_interface fw_interface;
u32 nr_cpus;
u32 nr_nodes;
int cores_per_node;
@@ -41,7 +47,8 @@ extern u32 memsize, highmemsize;
extern const struct plat_smp_ops loongson3_smp_ops;
/* loongson-specific command line, env and memory initialization */
-extern void __init prom_init_env(void);
+extern void __init prom_dtb_init_env(void);
+extern void __init prom_lefi_init_env(void);
extern void __init szmem(unsigned int node);
extern void *loongson_fdt_blob;
diff --git a/arch/mips/loongson64/env.c b/arch/mips/loongson64/env.c
index 1821d461b606..c8bb75d58f17 100644
--- a/arch/mips/loongson64/env.c
+++ b/arch/mips/loongson64/env.c
@@ -43,7 +43,18 @@ const char *get_system_type(void)
return "Generic Loongson64 System";
}
-void __init prom_init_env(void)
+
+void __init prom_dtb_init_env(void)
+{
+ if ((fw_arg2 < CKSEG0 || fw_arg2 > CKSEG1)
+ && (fw_arg2 < XKPHYS || fw_arg2 > XKSEG))
+
+ loongson_fdt_blob = __dtb_loongson64_2core_2k1000_begin;
+ else
+ loongson_fdt_blob = (void *)fw_arg2;
+}
+
+void __init prom_lefi_init_env(void)
{
struct boot_params *boot_p;
struct loongson_params *loongson_p;
diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c
index cfa788bca871..ed280b73bf89 100644
--- a/arch/mips/loongson64/init.c
+++ b/arch/mips/loongson64/init.c
@@ -52,6 +52,10 @@ void __init szmem(unsigned int node)
static unsigned long num_physpages;
u64 node_id, node_psize, start_pfn, end_pfn, mem_start, mem_size;
+ /* Otherwise come from DTB */
+ if (loongson_sysconf.fw_interface != LOONGSON_LEFI)
+ return;
+
/* Parse memory information and activate */
for (i = 0; i < loongson_memmap->nr_map; i++) {
node_id = loongson_memmap->map[i].node_id;
@@ -94,12 +98,20 @@ static void __init prom_init_memory(void)
void __init prom_init(void)
{
fw_init_cmdline();
- prom_init_env();
+
+ if (fw_arg2 == 0 || (fdt_magic(fw_arg2) == FDT_MAGIC)) {
+ loongson_sysconf.fw_interface = LOONGSON_DTB;
+ prom_dtb_init_env();
+ } else {
+ loongson_sysconf.fw_interface = LOONGSON_LEFI;
+ prom_lefi_init_env();
+ }
/* init base address of io space */
set_io_port_base(PCI_IOBASE);
- loongson_sysconf.early_config();
+ if (loongson_sysconf.early_config)
+ loongson_sysconf.early_config();
#ifdef CONFIG_NUMA
prom_init_numa_memory();
--
2.20.1
