On Mon, Mar 15, 2021 at 08:10:37AM +0100, Heiko Schocher wrote:
> Hello Shawn,
>
> On 15.03.21 07:47, Shawn Guo wrote:
> > On Tue, Mar 09, 2021 at 06:31:12AM +0100, Heiko Schocher wrote:
> >>
> >> This series enables support for the SPI NOR on the
> >> imx8mp based phyboard-pollux-rdk board.
> >>
> >> Patches new in v2:
> >> "spi: fspi: enable fspi driver for on imx8mp"
> >> which adds own compatible entry for imx8mp
> >>
> >> and seperate in own patch the documentation entry in
> >> patch "dt-bindings: spi: add compatible entry for imx8mp in FlexSPI controller"
> >> as checkpatch says:
> >>
> >> warning: DT binding docs and includes should be a separate patch. See: Documentation/devicetree/bindings/submitting-patches.rst
> >>
> >>
> >> Changes in v2:
> >> - work in comments from Marco
> >> add own compatible entry for imx8mp
> >> - work in comments from Marco
> >> - add own compatible entry "nxp,imx8mp-fspi"
> >> - reworked order of properties as Marco mentioned
> >> - work in comments from Marco and Teresa
> >> - rename node into "'som_flash: flash@0 { }"
> >> - compatible is now first entry
> >> - removed #size-cells and #address-cells
> >> as no child node. If bootloader adds them bootloader
> >> can add them too.
> >>
> >> Heiko Schocher (4):
> >> spi: fspi: enable fspi driver for on imx8mp
> >> dt-bindings: spi: add compatible entry for imx8mp in FlexSPI
> >> controller
> >> arm64: dts: imx8mp: add flexspi node
> >> arm64: imx8mp: imx8mp-phycore-som enable spi nor
> >
> > Two DTS patch look good. Ping me when driver and bindings changes are
> > accepted.
>
> Thanks!
>
> Hmm.. I have not splitted this series into 2 series... should I do
> this now?
No, you do not need to. I sent the message only because I didn't
receive patch #1 and #2, so I will not be aware of their status.
Shawn
