- Rename periph_clk to periph_osc. - Rename clkctl to periph_clk. - Move syscon-reboot to subnode. - Add watchdog. - Add SPI controller. - Add USBH PHY. - Add cfi-flash. Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx> --- v2: no changes arch/mips/boot/dts/brcm/bcm6358.dtsi | 83 ++++++++++++++++++++++++---- 1 file changed, 72 insertions(+), 11 deletions(-) diff --git a/arch/mips/boot/dts/brcm/bcm6358.dtsi b/arch/mips/boot/dts/brcm/bcm6358.dtsi index f5549a056bff..777c4379ed03 100644 --- a/arch/mips/boot/dts/brcm/bcm6358.dtsi +++ b/arch/mips/boot/dts/brcm/bcm6358.dtsi @@ -28,16 +28,19 @@ }; clocks { - periph_clk: periph-clk { + periph_osc: periph-osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; + clock-output-names = "periph"; }; }; aliases { + pflash = &pflash; serial0 = &uart0; serial1 = &uart1; + spi0 = &lsspi; }; cpu_intc: interrupt-controller { @@ -55,23 +58,22 @@ compatible = "simple-bus"; ranges; - clkctl: clock-controller@fffe0004 { + periph_clk: clock-controller@fffe0004 { compatible = "brcm,bcm6358-clocks"; reg = <0xfffe0004 0x4>; #clock-cells = <1>; }; - periph_cntl: syscon@fffe0008 { + pll_cntl: syscon@fffe0008 { compatible = "syscon"; reg = <0xfffe0008 0x4>; native-endian; - }; - reboot: syscon-reboot@fffe0008 { - compatible = "syscon-reboot"; - regmap = <&periph_cntl>; - offset = <0x0>; - mask = <0x1>; + reboot { + compatible = "syscon-reboot"; + offset = <0x0>; + mask = <0x1>; + }; }; periph_intc: interrupt-controller@fffe000c { @@ -92,6 +94,16 @@ #reset-cells = <1>; }; + wdt: watchdog@fffe005c { + compatible = "brcm,bcm7038-wdt"; + reg = <0xfffe005c 0xc>; + + clocks = <&periph_osc>; + clock-names = "refclk"; + + timeout-sec = <30>; + }; + leds0: led-controller@fffe00d0 { #address-cells = <1>; #size-cells = <0>; @@ -108,7 +120,7 @@ interrupt-parent = <&periph_intc>; interrupts = <2>; - clocks = <&periph_clk>; + clocks = <&periph_osc>; clock-names = "refclk"; status = "disabled"; @@ -121,18 +133,41 @@ interrupt-parent = <&periph_intc>; interrupts = <3>; - clocks = <&periph_clk>; + clocks = <&periph_osc>; clock-names = "refclk"; status = "disabled"; }; + lsspi: spi@fffe0800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,bcm6358-spi"; + reg = <0xfffe0800 0x70c>; + + interrupt-parent = <&periph_intc>; + interrupts = <1>; + + clocks = <&periph_clk BCM6358_CLK_SPI>; + clock-names = "spi"; + + resets = <&periph_rst BCM6358_RST_SPI>; + reset-names = "spi"; + + status = "disabled"; + }; + ehci: usb@fffe1300 { compatible = "brcm,bcm6358-ehci", "generic-ehci"; reg = <0xfffe1300 0x100>; big-endian; + interrupt-parent = <&periph_intc>; interrupts = <10>; + + phys = <&usbh 0>; + phy-names = "usb"; + status = "disabled"; }; @@ -141,9 +176,35 @@ reg = <0xfffe1400 0x100>; big-endian; no-big-frame-no; + interrupt-parent = <&periph_intc>; interrupts = <5>; + + phys = <&usbh 0>; + phy-names = "usb"; + + status = "disabled"; + }; + + usbh: usb-phy@fffe1500 { + compatible = "brcm,bcm6358-usbh-phy"; + reg = <0xfffe1500 0x38>; + #phy-cells = <1>; + + resets = <&periph_rst BCM6358_RST_USBH>; + reset-names = "usbh"; + status = "disabled"; }; }; + + pflash: nor@1e000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x1e000000 0x2000000>; + bank-width = <2>; + + status = "disabled"; + }; }; -- 2.20.1